OpenSimDefaults.ini 68 KB

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485868788899091929394959697989910010110210310410510610710810911011111211311411511611711811912012112212312412512612712812913013113213313413513613713813914014114214314414514614714814915015115215315415515615715815916016116216316416516616716816917017117217317417517617717817918018118218318418518618718818919019119219319419519619719819920020120220320420520620720820921021121221321421521621721821922022122222322422522622722822923023123223323423523623723823924024124224324424524624724824925025125225325425525625725825926026126226326426526626726826927027127227327427527627727827928028128228328428528628728828929029129229329429529629729829930030130230330430530630730830931031131231331431531631731831932032132232332432532632732832933033133233333433533633733833934034134234334434534634734834935035135235335435535635735835936036136236336436536636736836937037137237337437537637737837938038138238338438538638738838939039139239339439539639739839940040140240340440540640740840941041141241341441541641741841942042142242342442542642742842943043143243343443543643743843944044144244344444544644744844945045145245345445545645745845946046146246346446546646746846947047147247347447547647747847948048148248348448548648748848949049149249349449549649749849950050150250350450550650750850951051151251351451551651751851952052152252352452552652752852953053153253353453553653753853954054154254354454554654754854955055155255355455555655755855956056156256356456556656756856957057157257357457557657757857958058158258358458558658758858959059159259359459559659759859960060160260360460560660760860961061161261361461561661761861962062162262362462562662762862963063163263363463563663763863964064164264364464564664764864965065165265365465565665765865966066166266366466566666766866967067167267367467567667767867968068168268368468568668768868969069169269369469569669769869970070170270370470570670770870971071171271371471571671771871972072172272372472572672772872973073173273373473573673773873974074174274374474574674774874975075175275375475575675775875976076176276376476576676776876977077177277377477577677777877978078178278378478578678778878979079179279379479579679779879980080180280380480580680780880981081181281381481581681781881982082182282382482582682782882983083183283383483583683783883984084184284384484584684784884985085185285385485585685785885986086186286386486586686786886987087187287387487587687787887988088188288388488588688788888989089189289389489589689789889990090190290390490590690790890991091191291391491591691791891992092192292392492592692792892993093193293393493593693793893994094194294394494594694794894995095195295395495595695795895996096196296396496596696796896997097197297397497597697797897998098198298398498598698798898999099199299399499599699799899910001001100210031004100510061007100810091010101110121013101410151016101710181019102010211022102310241025102610271028102910301031103210331034103510361037103810391040104110421043104410451046104710481049105010511052105310541055105610571058105910601061106210631064106510661067106810691070107110721073107410751076107710781079108010811082108310841085108610871088108910901091109210931094109510961097109810991100110111021103110411051106110711081109111011111112111311141115111611171118111911201121112211231124112511261127112811291130113111321133113411351136113711381139114011411142114311441145114611471148114911501151115211531154115511561157115811591160116111621163116411651166116711681169117011711172117311741175117611771178117911801181118211831184118511861187118811891190119111921193119411951196119711981199120012011202120312041205120612071208120912101211121212131214121512161217121812191220122112221223122412251226122712281229123012311232123312341235123612371238123912401241124212431244124512461247124812491250125112521253125412551256125712581259126012611262126312641265126612671268126912701271127212731274127512761277127812791280128112821283128412851286128712881289129012911292129312941295129612971298129913001301130213031304130513061307130813091310131113121313131413151316131713181319132013211322132313241325132613271328132913301331133213331334133513361337133813391340134113421343134413451346134713481349135013511352135313541355135613571358135913601361136213631364136513661367136813691370137113721373137413751376137713781379138013811382138313841385138613871388138913901391139213931394139513961397139813991400140114021403140414051406140714081409141014111412141314141415141614171418141914201421142214231424142514261427142814291430143114321433143414351436143714381439144014411442144314441445144614471448144914501451145214531454145514561457145814591460146114621463146414651466146714681469147014711472147314741475147614771478147914801481148214831484148514861487148814891490149114921493149414951496149714981499150015011502150315041505150615071508150915101511151215131514151515161517151815191520152115221523152415251526152715281529153015311532153315341535153615371538153915401541154215431544154515461547154815491550155115521553155415551556155715581559156015611562156315641565156615671568156915701571157215731574157515761577157815791580158115821583158415851586158715881589159015911592159315941595159615971598159916001601160216031604160516061607160816091610161116121613161416151616161716181619162016211622162316241625162616271628162916301631163216331634163516361637163816391640164116421643164416451646164716481649165016511652165316541655165616571658165916601661166216631664166516661667166816691670167116721673167416751676167716781679168016811682168316841685168616871688168916901691169216931694169516961697169816991700170117021703170417051706170717081709171017111712171317141715171617171718171917201721172217231724172517261727172817291730173117321733173417351736173717381739174017411742174317441745174617471748174917501751175217531754175517561757175817591760176117621763176417651766176717681769177017711772177317741775177617771778177917801781178217831784178517861787178817891790179117921793179417951796179717981799180018011802180318041805
  1. ; This file contains defaults for various settings in OpenSimulator. These can be overriden
  2. ; by changing the same setting in OpenSim.ini (once OpenSim.ini.example has been copied to OpenSim.ini).
  3. [Startup]
  4. ; Console prompt
  5. ; Certain special characters can be used to customize the prompt
  6. ; Currently, these are
  7. ; \R - substitute region name
  8. ; \\ - substtitue \
  9. ConsolePrompt = "Region (\R) "
  10. ; Set this to true if you want to log crashes to disk
  11. ; this can be useful when submitting bug reports.
  12. ; However, this will only log crashes within OpenSimulator that cause the entire program to exit
  13. ; It will not log crashes caused by virtual machine failures, which includes mono and ODE failures.
  14. ; You will need to capture these native stack traces by recording the session log itself.
  15. save_crashes = false
  16. ; Directory to save crashes to if above is enabled
  17. ; (default is /opensimdir/crashes/*.txt or C:\opensim\crashes\*.txt)
  18. crash_dir = "crashes"
  19. ; Place to create a PID file
  20. ; PIDFile = "/tmp/OpenSim.exe.pid"
  21. ; Console commands run at startup
  22. startup_console_commands_file = "startup_commands.txt"
  23. ; Console commands run on shutdown
  24. shutdown_console_commands_file = "shutdown_commands.txt"
  25. ; Console commands run every 20 minutes
  26. ; timer_Script = "filename"
  27. ; timer_Script time interval (default 20 min)
  28. ; The time is 60 per minute
  29. ; timer_Interval = 1200
  30. ; ##
  31. ; ## SYSTEM
  32. ; ##
  33. ; Sets the method that OpenSim will use to fire asynchronous
  34. ; events. Valid values are UnsafeQueueUserWorkItem,
  35. ; QueueUserWorkItem, BeginInvoke, SmartThreadPool, and Thread.
  36. ;
  37. ; SmartThreadPool is reported to work well on Mono/Linux, but
  38. ; UnsafeQueueUserWorkItem has been benchmarked with better
  39. ; performance on .NET/Windows
  40. ;
  41. ; UnsafeQueueUserWorkItem refers to the fact that the code creating the event could elevate its security
  42. ; privileges. However, as calling code is trusted anyway this is safe (if you set
  43. ; TrustedBinaries = true in the [XEngine] section then you already have to trust that incoming code for other reasons).
  44. async_call_method = SmartThreadPool
  45. ; Max threads to allocate on the FireAndForget thread pool
  46. ; when running with the SmartThreadPool option above
  47. MaxPoolThreads = 15
  48. ; Plugin Registry Location
  49. ; Set path to directory for plugin registry. Information about the
  50. ; registered repositories and installed plugins will be stored here.
  51. ; The OpenSim.exe process must have R/W access to the location.
  52. ; RegistryLocation = "."
  53. ; ##
  54. ; ## CLIENTS
  55. ; ##
  56. ; Set this to the DLL containing the client stack to use.
  57. clientstack_plugin="OpenSim.Region.ClientStack.LindenUDP.dll"
  58. ; ##
  59. ; ## REGIONS
  60. ; ##
  61. ; Determine where OpenSimulator looks for the files which tell it which regions to server
  62. ; Defaults to "filesystem" if this setting isn't present
  63. region_info_source = "filesystem"
  64. ; region_info_source = "web"
  65. ; Determines where the region XML files are stored if you are loading these from the filesystem.
  66. ; Defaults to bin/Regions in your OpenSimulator installation directory
  67. ; regionload_regionsdir="C:\somewhere\xmlfiles\"
  68. ; Determines the page from which regions xml is retrieved if you are loading these from the web
  69. ; The XML here has the same format as it does on the filesystem (including the <Root> tag),
  70. ; except that everything is also enclosed in a <Regions> tag.
  71. ; regionload_webserver_url = "http://example.com/regions.xml";
  72. ;; Allow the simulator to start up if there are no region configuration available
  73. ;; from the selected region_info_source.
  74. allow_regionless = false
  75. ;; Allow child agents to see into the region even if their root counterpart isn't allowed in here
  76. see_into_region = true
  77. ; Maximum number of position, rotation and scale changes for each prim that the simulator will store for later undos
  78. ; Increasing this number will increase memory usage.
  79. MaxPrimUndos = 20
  80. ; Maximum size of non physical prims. Affects resizing of existing prims. This can be overriden in the region config file (as NonPhysicalPrimMax!).
  81. NonPhysicalPrimMax = 256
  82. ; Maximum size of physical prims. Affects resizing of existing prims. This can be overriden in the region config file.
  83. PhysicalPrimMax = 64
  84. ; If a viewer attempts to rez a prim larger than the non-physical or physical prim max, clamp the dimensions to the appropriate maximum
  85. ; This can be overriden in the region config file.
  86. ClampPrimSize = false
  87. ; Maximum number of prims allowable in a linkset. Affects creating new linksets. Ignored if less than or equal to zero.
  88. ; This can be overriden in the region config file.
  89. LinksetPrims = 0
  90. ; Allow scripts to keep running when they cross region boundaries, rather than being restarted. State is reloaded on the destination region.
  91. ; This only applies when crossing to a region running in a different simulator.
  92. ; For crossings where the regions are on the same simulator the script is always kept running.
  93. AllowScriptCrossing = true
  94. ; Allow compiled script binary code to cross region boundaries.
  95. ; If you set this to "true", any region that can teleport to you can
  96. ; inject ARBITRARY BINARY CODE into your system. Use at your own risk.
  97. ; YOU HAVE BEEN WARNED!!!
  98. TrustBinaries = false
  99. ; Combine all contiguous regions into one large megaregion
  100. ; Order your regions from South to North, West to East in your regions.ini and then set this to true
  101. ; Warning! Don't use this with regions that have existing content!, This will likely break them
  102. CombineContiguousRegions = false
  103. ; Extend the region's draw distance; 255m is the default which includes
  104. ; one neighbor on each side of the current region, 767m would go three
  105. ; neighbors on each side for a total of 49 regions in view. Warning, unless
  106. ; all the regions have the same drawdistance, you will end up with strange
  107. ; effects because the agents that get closed may be inconsistent.
  108. DefaultDrawDistance = 255.0
  109. ; If you have only one region in an instance, or to avoid the many bugs
  110. ; that you can trigger in modules by restarting a region, set this to
  111. ; true to make the entire instance exit instead of restarting the region.
  112. ; This is meant to be used on systems where some external system like
  113. ; Monit will restart any instance that exits, thereby making the shutdown
  114. ; into a restart.
  115. InworldRestartShutsDown = false
  116. ; The minimum proportion of a second that any particular frame can take to execute.
  117. ; Only change this if you really know what you're doing, and be prepared to change UpdatePhysicsEveryNFrames
  118. ; (and other Frames params) to match! For instance, halving MinFrameTime to 0.0445 require
  119. ; UpdatePhysicsEveryNFrames = 2 unless you don't mind your avatar walking like Benny Hill.
  120. MinFrameTime = 0.089
  121. ; Send scheduled updates to objects in the scene
  122. ; This must be a whole number
  123. UpdateObjectsEveryNFrames = 1;
  124. ; Send position/velocity, etc. updates to agents in the scene
  125. ; This must be a whole number
  126. UpdateAgentsEveryNFrames = 1;
  127. ; Apply pending forces from physics calculations to an entity.
  128. ; This must be a whole number
  129. UpdateEntityMovementEveryNFrames = 1;
  130. ; Send coarse location updates to viewers. In a classic viewer, this updates the minimap.
  131. ; This must be a whole number
  132. UpdateCoarseLocationsEveryNFrames = 50;
  133. ; Update physics. Within each update physics also updates in a series of contigous mini-steps
  134. ; This must be a whole number
  135. UpdatePhysicsEveryNFrames = 1;
  136. ; Clean up temp on rez objects.
  137. ; This must be a whole number
  138. UpdateTempCleaningEveryNFrames = 1000;
  139. ; Send out the on frame event to modules and other listeners. This should probably never deviate from 1.
  140. ; This must be a whole number
  141. UpdateEventsEveryNFrames = 1;
  142. ; Send terrain updates to viewers
  143. ; This must be a whole number
  144. UpdateTerrainEveryNFrames = 50;
  145. ; Persitently store any objects which meet the PRIM STORAGE criteria
  146. ; This must be a whole number
  147. UpdateStorageEveryNFrames = 200;
  148. ; ##
  149. ; ## PRIM STORAGE
  150. ; ##
  151. ; Persistence of changed objects happens during regular sweeps. The following control that behaviour to
  152. ; prevent frequently changing objects from heavily loading the region data store.
  153. ; If both of these values are set to zero then persistence of all changed objects will happen on every sweep.
  154. ;
  155. ; Objects will be considered for persistance in the next sweep when they have not changed for this number of seconds
  156. MinimumTimeBeforePersistenceConsidered = 60
  157. ; Objects will always be considered for persistance in the next sweep if the first change occurred this number of seconds ago
  158. MaximumTimeBeforePersistenceConsidered = 600
  159. ; ##
  160. ; ## PHYSICS
  161. ; ##
  162. ; If true then prims can be collided with by avatars, other prims, etc.
  163. ; If false then all prims are phantom, no matter whether their phantom flag is checked or unchecked.
  164. ; Also, no prims are subject to physics.
  165. collidable_prim = true
  166. ; If true then prims can be made subject to physics (gravity, pushing, etc.).
  167. ; If false then physics flag can be set but it is not honoured. However, prims are still solid for the purposes of collision direction
  168. physical_prim = true
  169. ; Select a mesher here.
  170. ;
  171. ; Meshmerizer properly handles complex prims by using triangle meshes.
  172. ; Note that only the ODE physics engine currently deals with meshed prims in a satisfactory way
  173. ;
  174. ; ZeroMesher is faster but leaves the physics engine to model the mesh using the basic shapes that it supports
  175. ; Usually this is only a box
  176. meshing = Meshmerizer
  177. ;meshing = ZeroMesher
  178. ; Path to decoded sculpty maps
  179. ; Defaults to "j2kDecodeCache
  180. ;DecodedSculptMapPath = "j2kDecodeCache"
  181. ; if you use Meshmerizer and want sculpt map collisions, setting this to
  182. ; to true will store decoded sculpt maps in a special folder in your bin
  183. ; folder, which can reduce startup times by reducing asset requests. Some
  184. ; versions of mono dont work well when reading the cache files, so set this
  185. ; to false if you have compatibility problems.
  186. ;CacheSculptMaps = true
  187. ; Choose one of the physics engines below.
  188. ; BulletSim is a high performance physics engine. It is the default OpenSimulator physics engine
  189. ; OpenDynamicsEngine is another developed physics engine that was the previous default in OpenSimulator 0.7.6 and before
  190. physics = BulletSim
  191. ;physics = modified_BulletX
  192. ;physics = OpenDynamicsEngine
  193. ;physics = basicphysics
  194. ;physics = POS
  195. ; ##
  196. ; ## SCRIPT ENGINE
  197. ; ##
  198. DefaultScriptEngine = "XEngine"
  199. ; ##
  200. ; ## EMAIL MODULE
  201. ; ##
  202. ;emailmodule = DefaultEmailModule
  203. ; ##
  204. ; ## ANIMATIONS
  205. ; ##
  206. ; If enabled, enableFlySlow will change the primary fly state to
  207. ; FLYSLOW, and the "always run" state will be the regular fly.
  208. enableflyslow = false
  209. ; PreJump is an additional animation state, but it probably
  210. ; won't look right until the physics engine supports it
  211. ; (i.e delays takeoff for a moment)
  212. ; Simulator Stats URI
  213. ; Enable JSON simulator data by setting a URI name (case sensitive)
  214. ; Returns regular sim stats (SimFPS, ...)
  215. ; Stats_URI = "jsonSimStats"
  216. ; Simulator StatsManager URI
  217. ; Enable fetch of StatsManager registered stats. Fetch is query which can optionally
  218. ; specify category, container and stat to fetch. If not selected, returns all of that type.
  219. ; http://simulatorHTTPport/ManagedStats/?cat=Category&cont=Container&stat=Statistic
  220. ; ManagedStatsRemoteFetchURI = "ManagedStats"
  221. ; Make OpenSim start all regions woth logins disabled. They will need
  222. ; to be enabled from the console if this is set
  223. ; StartDisabled = false
  224. ; Image decoding. Use CSJ2K for layer boundary decoding if true,
  225. ; OpenJPEG if false
  226. ; UseCSJ2K = true
  227. ; Use "Trash" folder for items deleted from the scene
  228. ; When set to True (the default) items deleted from the scene will be
  229. ; stored in the user's trash or lost and found folder. When set to
  230. ; False items will be removed from the scene permanently
  231. UseTrashOnDelete = True
  232. [Map]
  233. ;WorldMapModule = "WorldMap"
  234. ;MapImageModule = "MapImageModule"
  235. ; World map blacklist timeout in seconds
  236. ;BlacklistTimeout = 600
  237. ; Set to false to not generate any maptiles
  238. ;GenerateMaptiles = true
  239. ; Refresh (in seconds) the map tile periodically
  240. ;MaptileRefresh = 0
  241. ; If not generating maptiles, use this static texture asset ID
  242. ;MaptileStaticUUID = "00000000-0000-0000-0000-000000000000"
  243. ; Draw objects on maptile. This step might take a long time if you've got a large number of
  244. ; objects, so you can turn it off here if you'd like.
  245. DrawPrimOnMapTile = true
  246. ; Use terrain texture for maptiles if true, use shaded green if false
  247. TextureOnMapTile = true
  248. ; Texture prims
  249. TexturePrims = true
  250. ; Only texture prims that have a diagonal size greater than this number
  251. TexturePrimSize = 48
  252. ; Attempt to render meshes and sculpties on the map
  253. RenderMeshes = false;
  254. [Permissions]
  255. ; ##
  256. ; ## PERMISSIONS
  257. ; ##
  258. ;permissionmodules = "DefaultPermissionsModule"
  259. ; If set to false, then, in theory, the server never carries out permission checks (allowing anybody to copy
  260. ; any item, etc. This may not yet be implemented uniformally.
  261. ; If set to true, then all permissions checks are carried out
  262. ; Default is true
  263. serverside_object_permissions = true
  264. allow_grid_gods = false
  265. ; This allows somne control over permissions
  266. ; please note that this still doesn't duplicate SL, and is not intended to
  267. ;region_owner_is_god = true
  268. ;region_manager_is_god = false
  269. ;parcel_owner_is_god = true
  270. ; Control user types that are allowed to create new scripts
  271. ; Only enforced if serviceside_object_permissions is true
  272. ;
  273. ; Current possible values are
  274. ; all - anyone can create scripts (subject to normal permissions)
  275. ; gods - only administrators can create scripts (as long as allow_grid_gods is true)
  276. ; Default value is all
  277. ; allowed_script_creators = all
  278. ; Control user types that are allowed to edit (save) scripts
  279. ; Only enforced if serviceside_object_permissions is true
  280. ;
  281. ; Current possible values are
  282. ; all - anyone can edit scripts (subject to normal permissions)
  283. ; gods - only administrators can edit scripts (as long as allow_grid_gods is true)
  284. ; Default value is all
  285. ; allowed_script_editors = all
  286. ; Provides a simple control for land owners to give build rights to specific avatars
  287. ; in publicly accessible parcels that disallow object creation in general.
  288. ; Owners specific avatars by adding them to the Access List of the parcel
  289. ; without having to use the Groups feature
  290. ; Disabled by default
  291. ; simple_build_permissions = False
  292. ; Minimum user level required to upload assets
  293. ;LevelUpload = 0
  294. [RegionReady]
  295. ; Enable this module to get notified once all items and scripts in the region have been completely loaded and compiled
  296. enabled = true
  297. ; Channel on which to signal region readiness through a message
  298. ; formatted as follows: "{server_startup|oar_file_load},{0|1},n,[oar error]"
  299. ; - the first field indicating whether this is an initial server startup
  300. ; - the second field is a number indicating whether the OAR file loaded ok (1 == ok, 0 == error)
  301. ; - the third field is a number indicating how many scripts failed to compile
  302. ; - "oar error" if supplied, provides the error message from the OAR load
  303. channel_notify = -800
  304. ; - disallow logins while scripts are loading
  305. ; Instability can occur on regions with 100+ scripts if users enter before they have finished loading
  306. login_disable = true
  307. ; - send an alert as json to a service
  308. ; alert_uri = "http://myappserver.net/my_handler/"
  309. [EstateManagement]
  310. ; If false, then block any region restart requests from the client even if they are otherwise valid.
  311. ; Default is true
  312. AllowRegionRestartFromClient = true
  313. [UserProfiles]
  314. ;# {ProfileURL} {} {Set url to UserProfilesService} {}
  315. ;; Set the value of the url to your UserProfilesService
  316. ;; If un-set / "" the module is disabled
  317. ;; If the ProfileURL is not set, then very BASIC
  318. ;; profile support will be configured. If the ProfileURL is set to a
  319. ;; valid URL, then full profile support will be configured. The URL
  320. ;; points to your grid's Robust user profiles service
  321. ;;
  322. ; ProfileURL = http://127.0.0.1:9000
  323. [SMTP]
  324. enabled = false
  325. ;enabled = true
  326. ;internal_object_host = lsl.opensim.local
  327. ;host_domain_header_from = 127.0.0.1
  328. ;SMTP_SERVER_HOSTNAME = 127.0.0.1
  329. ;SMTP_SERVER_PORT = 25
  330. ;SMTP_SERVER_LOGIN = foo
  331. ;SMTP_SERVER_PASSWORD = bar
  332. [Network]
  333. ConsoleUser = "Test"
  334. ConsolePass = "secret"
  335. http_listener_port = 9000
  336. console_port = 0
  337. ; ssl config: Experimental! The auto https config only really works definately on windows XP now
  338. ; you need a Cert Request/Signed pair installed in the MY store with the CN specified below
  339. ; you can use https on other platforms, but you'll need to configure the httpapi yourself for now
  340. http_listener_ssl = false ; Also create a SSL server
  341. http_listener_cn = "localhost" ; Use the cert with the common name
  342. http_listener_sslport = 9001 ; Use this port for SSL connections
  343. http_listener_ssl_cert = "" ; Currently unused, but will be used for OSHttpServer
  344. ; HTTPS for "Out of band" management applications such as the remote
  345. ; admin module
  346. ;
  347. ; Create https_listener = "True" will create a listener on the port
  348. ; specified. Provide the path to your server certificate along with it's
  349. ; password
  350. ; https_listener = False
  351. ; Set our listener to this port
  352. ; https_port = 0
  353. ; Path to X509 certificate
  354. ; cert_path = "path/to/cert.p12"
  355. ; Password for cert
  356. ; cert_pass = "password"
  357. ; Hostname to use in llRequestURL/llRequestSecureURL
  358. ; if not defined - default machine name is being used
  359. ; (on Windows this mean NETBIOS name - useably only inside local network)
  360. ; ExternalHostNameForLSL=127.0.0.1
  361. ; What is reported as the "X-Secondlife-Shard"
  362. ; Defaults to the user server url if not set
  363. ; The old default is "OpenSim", set here for compatibility
  364. shard = "OpenSim"
  365. ; What is reported as the "User-Agent" when using llHTTPRequest
  366. ; Defaults to not sent if not set here. See the notes section in the wiki at
  367. ; http://wiki.secondlife.com/wiki/LlHTTPRequest for comments on adding
  368. ; " (Mozilla Compatible)" to the text where there are problems with a web server
  369. ;user_agent = "OpenSim LSL (Mozilla Compatible)"
  370. ; OpenSim can send multiple simultaneous requests for services such as asset
  371. ; retrieval. However, some versions of mono appear to hang when there are too
  372. ; many simultaneous requests, default is 30 and is currently applied only to assets
  373. ;MaxRequestConcurrency = 30
  374. [ClientStack.LindenUDP]
  375. ; Set this to true to process incoming packets asynchronously. Networking is
  376. ; already separated from packet handling with a queue, so this will only
  377. ; affect whether networking internals such as packet decoding and
  378. ; acknowledgement accounting are done synchronously or asynchronously
  379. ; Default is true.
  380. ;
  381. ;async_packet_handling = true
  382. ; The client socket receive buffer size determines how many
  383. ; incoming requests we can process; the default on .NET is 8192
  384. ; which is about 2 4k-sized UDP datagrams. On mono this is
  385. ; whatever the underlying operating system has as default; for
  386. ; example, ubuntu 8.04 or SLES11 have about 111k, which is about
  387. ; 27 4k-sized UDP datagrams (on linux platforms you can [as root]
  388. ; do "sysctl net.core.rmem_default" to find out what your system
  389. ; uses a default socket receive buffer size.
  390. ;
  391. ; client_socket_rcvbuf_size allows you to specify the receive
  392. ; buffer size LLUDPServer should use. NOTE: this will be limited
  393. ; by the system's settings for the maximum client receive buffer
  394. ; size (on linux systems you can set that with "sysctl -w
  395. ; net.core.rmem_max=X")
  396. ;
  397. ;client_socket_rcvbuf_size = 8388608
  398. ; Maximum outbound bytes per second for a single scene. This can be used to
  399. ; throttle total outbound UDP traffic for a simulator. The default value is
  400. ; 0, meaning no throttling at the scene level. The example given here is
  401. ; 20 megabits
  402. ;
  403. ;scene_throttle_max_bps = 2621440
  404. ; Maximum bits per second to send to any single client. This will override
  405. ; the user's viewer preference settings. The default value is 0, meaning no
  406. ; aggregate throttling on clients (only per-category throttling). The
  407. ; example given here is 1.5 megabits
  408. ;
  409. ;client_throttle_max_bps = 196608
  410. ; Adaptive throttling attempts to limit network overload when multiple
  411. ; clients login by starting each connection more slowly. Disabled by
  412. ; default
  413. ;
  414. enable_adaptive_throttles = true
  415. ; Per-client bytes per second rates for the various throttle categories.
  416. ; These are default values that will be overriden by clients. These
  417. ; defaults are approximately equivalent to the throttles set by the Imprudence
  418. ; viewer when maximum bandwidth is set to 350kbps
  419. ;resend_default = 6625
  420. ;land_default = 9125
  421. ;wind_default = 1750
  422. ;cloud_default = 1750
  423. ;task_default = 18500
  424. ;texture_default = 18500
  425. ;asset_default = 10500
  426. ; Configures how ObjectUpdates are aggregated. These numbers
  427. ; do not literally mean how many updates will be put in each
  428. ; packet that goes over the wire, as packets are
  429. ; automatically split on a 1400 byte boundary. These control
  430. ; the balance between responsiveness of interest list updates
  431. ; and total throughput. Higher numbers will ensure more full-
  432. ; sized packets and faster sending of data, but more delay in
  433. ; updating interest lists
  434. ;
  435. ;PrimUpdatesPerCallback = 100
  436. ; TextureSendLimit determines how many packets will be put on
  437. ; the outgoing queue each cycle. Like the settings above, this
  438. ; is a balance between responsiveness to priority updates and
  439. ; total throughput. Higher numbers will give a better
  440. ; throughput at the cost of reduced responsiveness to client
  441. ; priority changes or transfer aborts
  442. ;
  443. ;TextureSendLimit = 20
  444. ; CannibalizeTextureRate allows bandwidth to be moved from the
  445. ; UDP texture throttle to the task throttle. Since most viewers
  446. ; use HTTP textures, this provides a means of using what is largely
  447. ; unused bandwidth in the total throttle. The value is the proportion
  448. ; of the texture rate to move to the task queue. It must be between
  449. ; 0.0 (none of the bandwidth is cannibalized) and 0.9 (90% of the
  450. ; bandwidth is grabbed)
  451. ;
  452. ; CannibalizeTextureRate = 0.5
  453. ; Quash and remove any light properties from attachments not on the
  454. ; hands. This allows flashlights and lanterns to function, but kills
  455. ; silly vanity "Facelights" dead. Sorry, head mounted miner's lamps
  456. ; will also be affected.
  457. ;
  458. ;DisableFacelights = false
  459. ; The time to wait before disconecting an unresponsive client.
  460. ; The time is in seconds. The default is one minute
  461. ;
  462. ;AckTimeout = 60
  463. ; The time to wait before disconecting an unresponsive paused client.
  464. ; A client can be paused when the file selection dialog is open during file upload.
  465. ; This gives extra time to find files via the dialog but will still disconnect if
  466. ; the client crashes or loses its network connection
  467. ; The time is in seconds. The default is five minutes.
  468. ;
  469. ;PausedAckTimeout = 300
  470. [ClientStack.LindenCaps]
  471. ;; Long list of capabilities taken from
  472. ;; http://wiki.secondlife.com/wiki/Current_Sim_Capabilities
  473. ;; Not all are supported by OpenSim. The ones supported are
  474. ;; set to localhost. These defaults can be overwritten
  475. ;; in OpenSim.ini
  476. ;;
  477. Cap_AttachmentResources = ""
  478. Cap_ChatSessionRequest = ""
  479. Cap_CopyInventoryFromNotecard = "localhost"
  480. Cap_DispatchRegionInfo = ""
  481. Cap_EstateChangeInfo = ""
  482. Cap_EnvironmentSettings = "localhost"
  483. Cap_EventQueueGet = "localhost"
  484. Cap_FetchInventory = ""
  485. Cap_ObjectMedia = "localhost"
  486. Cap_ObjectMediaNavigate = "localhost"
  487. Cap_FetchLib = ""
  488. Cap_FetchLibDescendents = ""
  489. Cap_GetDisplayNames = ""
  490. Cap_GetTexture = "localhost"
  491. Cap_GetMesh = "localhost"
  492. Cap_GetObjectCost = ""
  493. Cap_GetObjectPhysicsData = ""
  494. Cap_GroupProposalBallot = ""
  495. Cap_HomeLocation = ""
  496. Cap_LandResources = ""
  497. Cap_MapLayer = "localhost"
  498. Cap_MapLayerGod = "localhost"
  499. Cap_NewFileAgentInventory = "localhost"
  500. Cap_NewFileAgentInventoryVariablePrice = "localhost"
  501. Cap_ObjectAdd = "localhost"
  502. Cap_ParcelPropertiesUpdate = "localhost"
  503. Cap_ParcelMediaURLFilterList = ""
  504. Cap_ParcelNavigateMedia = ""
  505. Cap_ParcelVoiceInfoRequest = ""
  506. Cap_ProductInfoRequest = ""
  507. Cap_ProvisionVoiceAccountRequest = ""
  508. Cap_RemoteParcelRequest = "localhost"
  509. Cap_RequestTextureDownload = ""
  510. Cap_SearchStatRequest = ""
  511. Cap_SearchStatTracking = ""
  512. Cap_SendPostcard = ""
  513. Cap_SendUserReport = ""
  514. Cap_SendUserReportWithScreenshot = ""
  515. Cap_ServerReleaseNotes = ""
  516. Cap_SimConsole = ""
  517. Cap_SimulatorFeatures = ""
  518. Cap_SetDisplayName = ""
  519. Cap_StartGroupProposal = ""
  520. Cap_TextureStats = ""
  521. Cap_UntrustedSimulatorMessage = ""
  522. Cap_UpdateAgentInformation = ""
  523. Cap_UpdateAgentLanguage = ""
  524. Cap_UpdateGestureAgentInventory = ""
  525. Cap_UpdateNotecardAgentInventory = "localhost"
  526. Cap_UpdateScriptAgent = "localhost"
  527. Cap_UpdateGestureTaskInventory = ""
  528. Cap_UpdateNotecardTaskInventory = "localhost"
  529. Cap_UpdateScriptTask = "localhost"
  530. Cap_UploadBakedTexture = "localhost"
  531. Cap_UploadObjectAsset = "localhost"
  532. Cap_ViewerStartAuction = ""
  533. Cap_ViewerStats = ""
  534. ; Capabilities for fetching inventory over HTTP rather than UDP
  535. ; FetchInventoryDescendents2 and FetchInventory2 are the ones used in the latest Linden Lab viewers (from some point in the v2 series and above)
  536. ; It appears that Linden Lab viewer 3.3.1 onwards will not work properly if FetchInventoryDescendents2 and FetchInventory2 are not enabled
  537. Cap_WebFetchInventoryDescendents = ""
  538. Cap_FetchInventoryDescendents2 = "localhost"
  539. Cap_FetchInventory2 = "localhost"
  540. ; Capability for searching for people
  541. Cap_AvatarPickerSearch = "localhost"
  542. [Chat]
  543. ; Controls whether the chat module is enabled. Default is true.
  544. enabled = true;
  545. ; Distance in meters that whispers should travel. Default is 10m
  546. whisper_distance = 10
  547. ; Distance in meters that ordinary chat should travel. Default is 20m
  548. say_distance = 20
  549. ; Distance in meters that shouts should travel. Default is 100m
  550. shout_distance = 100
  551. [EntityTransfer]
  552. ; The maximum protocol version that we will use for outgoing transfers
  553. ; Valid values are
  554. ; "SIMULATION/0.2"
  555. ; - this is the default. A source simulator which only implements "SIMULATION/0.1" can still teleport with that protocol
  556. ; - this protocol is more efficient than "SIMULATION/0.1"
  557. ; "SIMULATION/0.1"
  558. ; - this is an older teleport protocol used in OpenSimulator 0.7.5 and before.
  559. MaxOutgoingTransferVersion = "SIMULATION/0.2"
  560. ; The maximum distance in regions that an agent is allowed to teleport
  561. ; along the x or y axis. This is set to 16383 because current viewers
  562. ; can't handle teleports that are greater than this distance
  563. ; Setting to 0 will allow teleports of any distance
  564. ;
  565. max_distance = 16383
  566. ; Minimum user level required for HyperGrid teleports
  567. LevelHGTeleport = 0
  568. ; Determine whether the cancel button is shown at all during teleports.
  569. ; This option exists because cancelling at certain points can result in an unuseable session (frozen avatar, etc.)
  570. ; Disabling cancellation can be okay in small closed grids where all teleports are highly likely to suceed.
  571. DisableInterRegionTeleportCancellation = false
  572. [Messaging]
  573. ; Control which region module is used for instant messaging.
  574. ; Default is InstantMessageModule (this is the name of the core IM module as well as the setting)
  575. InstantMessageModule = InstantMessageModule
  576. ; MessageTransferModule = MessageTransferModule
  577. ; OfflineMessageModule = OfflineMessageModule
  578. ; OfflineMessageURL = http://yourserver/Offline.php
  579. ; MuteListModule = MuteListModule
  580. ; MuteListURL = http://yourserver/Mute.php
  581. ; Control whether group messages are forwarded to offline users. Default is true.
  582. ; ForwardOfflineGroupMessages = true
  583. [Inventory]
  584. ; Control whether multiple objects sent to inventory should be coaleseced into a single item
  585. ; There are still some issues with coalescence, including the fact that rotation is not restored
  586. ; and some assets may be missing from archive files.
  587. CoalesceMultipleObjectsToInventory = true
  588. [Appearance]
  589. ; Persist avatar baked textures
  590. ; Persisting baked textures can speed up login and region border
  591. ; crossings especially with large numbers of users, though it
  592. ; will store potentially large numbers of textures in your asset
  593. ; database
  594. PersistBakedTextures = false
  595. ; Control the delay before appearance is sent to other avatars and
  596. ; saved in the avatar service. Attempts to limit the impact caused
  597. ; by the very chatty dialog that sets appearance when an avatar
  598. ; logs in or teleports into a region; values are in seconds
  599. DelayBeforeAppearanceSave = 5
  600. DelayBeforeAppearanceSend = 2
  601. ; If true, avatar appearance information is resent to other avatars in the simulator every 60 seconds.
  602. ; This may help with some situations where avatars are persistently grey, though it will not help
  603. ; in other situations (e.g. appearance baking failures where the avatar only appears as a cloud to others).
  604. ResendAppearanceUpdates = true
  605. ; Turning this on responds to CachedTexture packets to possibly avoid rebaking the avatar
  606. ; on every login
  607. ReuseTextures = false
  608. [Attachments]
  609. ; Controls whether avatar attachments are enabled.
  610. ; Defaults to true - only set to false for debugging purposes
  611. Enabled = true
  612. ; Controls the number of milliseconds that are slept per 100 prims rezzed in attachments
  613. ; Experimental setting to control CPU spiking when avatars with many attachments login/change outfit
  614. ; or when multiple avatars with medium level attachments login/change outfit simultaneously.
  615. ; If 0 then no throttling is performed.
  616. ThrottlePer100PrimsRezzed = 0;
  617. [Mesh]
  618. ; enable / disable Collada mesh support
  619. ; default is true
  620. AllowMeshUpload = true
  621. ; if you use Meshmerizer and want collisions for meshies, setting this to true
  622. ; will cause OpenSim to attempt to decode meshies assets, extract the physics
  623. ; mesh, and use it for collisions.
  624. UseMeshiesPhysicsMesh = true
  625. ; Minimum user level required to upload meshes
  626. ;LevelUpload = 0
  627. [Textures]
  628. ; If true, textures generated dynamically (i.e. through osSetDynamicTextureData() and similar OSSL functions) are reused where possible
  629. ; Chiefly, reuse occurs if a texture has already been generated with identical data and settings, and that texture contains no dynamic components
  630. ; (e.g. images pulled from an external HTTP address).
  631. ; Reusing previously generated textures results in a much faster update on the viewer but may cause issues if the viewer didn't receive all resolutions of the texture.
  632. ; Currently, it will also increase asset cache use since temporary dynamic textures are no longer deleted.
  633. ; Hence, currently considered experimental.
  634. ; Default is false.
  635. ReuseDynamicTextures = false
  636. ; If true, then textures generated dynamically that have a low data size relative to their pixel size are not reused
  637. ; This is to workaround an apparent LL 3.3.4 and earlier viewer bug where such textures are not redisplayed properly when pulled from the viewer cache.
  638. ; Only set this to true if you are sure that all the viewers using your simulator will not suffer from this problem.
  639. ; This setting only has an affect is ReuseDynamicTextures = true
  640. ; Default is false
  641. ReuseDynamicLowDataTextures = false
  642. [ODEPhysicsSettings]
  643. ; ##
  644. ; ## Physics stats settings
  645. ;
  646. ; If collect_stats is enabled, then extra stat information is collected which is accessible via the MonitorModule
  647. ; (see http://opensimulator.org/wiki/Monitoring_Module for more details).
  648. collect_stats = false
  649. ; ##
  650. ; ## Physics logging settings - logfiles are saved to *.DIF files
  651. ; ##
  652. ; default is false
  653. ;physics_logging = true
  654. ;; every n simulation iterations, the physics snapshot file is updated
  655. ;physics_logging_interval = 50
  656. ;; append to existing physics logfile, or overwrite existing logfiles?
  657. ;physics_logging_append_existing_logfile = true
  658. ;##
  659. ;## World Settings
  660. ;##
  661. ;Gravity. Feel like falling up? change world_gravityz to 9.8 instead of -9.8. m/s
  662. world_gravityx = 0
  663. world_gravityy = 0
  664. world_gravityz = -9.8
  665. ; Terminal velocity of a falling avatar
  666. ; This is the same http://en.wikipedia.org/wiki/Terminal_velocity#Examples
  667. ; Max value is 255, min value is 0
  668. avatar_terminal_velocity = 54
  669. ; World Step size. (warning these are dangerous. Changing these will probably cause your scene to explode dramatically)
  670. ; reference: fps = (0.089/ODE_STEPSIZE) * 1000;
  671. world_stepsize = 0.0178
  672. world_internal_steps_without_collisions = 10
  673. ;World Space settings. Affects memory consumption vs Collider CPU time for avatar and physical prim
  674. world_hashspace_size_low = -4
  675. world_hashSpace_size_high = 128
  676. ;Dynamic space settings Affects memory consumption vs Collider CPU time for static prim
  677. meters_in_small_space = 29.9
  678. small_hashspace_size_low = -4
  679. small_hashspace_size_high = 66
  680. ; ##
  681. ; ## Contact properties. (the stuff that happens when things come in contact with each other)
  682. ; ##
  683. ; surface layer around geometries other geometries can sink into before generating a contact
  684. world_contact_surface_layer = 0.001
  685. ; Filtering collisions helps keep things stable physics wise, but sometimes
  686. ; it can be overzealous. If you notice bouncing, chances are it's that.
  687. filter_collisions = false
  688. ; Non Moving Terrain Contact (avatar isn't moving)
  689. nm_terraincontact_friction = 255.0
  690. nm_terraincontact_bounce = 0.1
  691. nm_terraincontact_erp = 0.1025
  692. ; Moving Terrain Contact (avatar is moving)
  693. m_terraincontact_friction = 75.0
  694. m_terraincontact_bounce = 0.05
  695. m_terrainContact_erp = 0.05025
  696. ; Moving Avatar to object Contact
  697. m_avatarobjectcontact_friction = 75.0
  698. m_avatarobjectcontact_bounce = 0.1
  699. ; Object to Object Contact and Non-Moving Avatar to object
  700. objectcontact_friction = 250.0
  701. objectcontact_bounce = 0.2
  702. ; ##
  703. ; ## Avatar Control
  704. ; ##
  705. ; PID Controller Settings. These affect the math that causes the avatar to reach the
  706. ; desired velocity
  707. ; See http://en.wikipedia.org/wiki/PID_controller
  708. av_pid_derivative_linux = 2200.0
  709. av_pid_proportional_linux = 900.0;
  710. av_pid_derivative_win = 2200.0
  711. av_pid_proportional_win = 900.0;
  712. ;girth of the avatar. Adds radius to the height also
  713. av_capsule_radius = 0.37
  714. ; Max force permissible to use to keep the avatar standing up straight
  715. av_capsule_standup_tensor_win = 550000
  716. av_capsule_standup_tensor_linux = 550000
  717. ; specifies if the capsule should be tilted (=true; old compatibility mode)
  718. ; or straight up-and-down (=false; better and more consistent physics behavior)
  719. av_capsule_tilted = false
  720. ; used to calculate mass of avatar.
  721. ; float AVvolume = (float) (Math.PI*Math.Pow(CAPSULE_RADIUS, 2)*CAPSULE_LENGTH);
  722. ; av_density * AVvolume;
  723. av_density = 80
  724. ; use this value to cut 52% of the height the sim gives us
  725. ; Currently unused
  726. ; av_height_fudge_factor = 0.52
  727. ; Movement. Smaller is faster.
  728. ; speed of movement with Always Run off
  729. av_movement_divisor_walk = 1.3
  730. ; speed of movement with Always Run on
  731. av_movement_divisor_run = 0.8
  732. ; When the avatar flies, it will be moved up by this amount off the ground (in meters)
  733. minimum_ground_flight_offset = 3.0
  734. ; Plant avatar. This reduces the effect of physical contacts with the avatar.
  735. ; If you have a group of unruly and rude visitors that bump each other, turn this on to make that less attractive.
  736. ; The avatar still allows a small movement based on the PID settings above. Stronger PID settings AND this active
  737. ; will lock the avatar in place
  738. av_planted = false
  739. ; No Avatar Avatar Collissions. This causes avatar to be able to walk through each other as if they're ghosts but still interact with the environment
  740. av_av_collisions_off = false
  741. ; ##
  742. ; ## Object options
  743. ; ##
  744. ; used in the mass calculation.
  745. geometry_default_density = 10.000006836
  746. ; amount of ODE steps where object is non moving for ODE to automatically put it to sleep
  747. body_frames_auto_disable = 20
  748. ; used to control llMove2Target
  749. body_pid_derivative = 35
  750. body_pid_gain = 25
  751. ; maximum number of contact points to generate per collision
  752. contacts_per_collision = 80
  753. ; amount of time a geom/body will try to cross a region border before it gets disabled
  754. geom_crossing_failures_before_outofbounds = 5
  755. ; start throttling the object updates if object comes in contact with 3 or more other objects
  756. geom_contactpoints_start_throttling = 3
  757. ; send 1 update for every x updates below when throttled
  758. geom_updates_before_throttled_update = 15
  759. ; Used for llSetStatus. How rigid the object rotation is held on the axis specified
  760. body_motor_joint_maxforce_tensor_linux = 5
  761. body_motor_joint_maxforce_tensor_win = 5
  762. ; Maximum mass an object can be before it is clamped
  763. maximum_mass_object = 10000.01
  764. ; ##
  765. ; ## Sculpted Prim settings
  766. ; ##
  767. ; Do we want to mesh sculpted prim to collide like they look?
  768. mesh_sculpted_prim = true
  769. ; number^2 non-physical level of detail of the sculpt texture. 32x32 - 1024 verticies
  770. mesh_lod = 32
  771. ; number^2 physical level of detail of the sculpt texture. 16x16 - 256 verticies
  772. mesh_physical_lod = 16
  773. ; ##
  774. ; ## Joint support
  775. ; ##
  776. ; If you would like physics joints to be enabled through a special naming
  777. ; convention in the client, set this to true.
  778. ; (See NINJA Physics documentation, http://opensimulator.org/wiki/NINJA_Physics)
  779. ; Default is false
  780. ;use_NINJA_physics_joints = true
  781. ; ##
  782. ; ## additional meshing options
  783. ; ##
  784. ; Physical collision mesh proxies are normally created for complex prim shapes,
  785. ; and collisions for simple boxes and spheres are computed algorithmically.
  786. ; If you would rather have mesh proxies for simple prims, you can set this to
  787. ; true. Note that this will increase memory usage and region startup time.
  788. ; Default is false.
  789. ;force_simple_prim_meshing = true
  790. [BulletSim]
  791. ; All the BulletSim parameters can be displayed with the console command
  792. ; "physics get all" and all are defined in the source file
  793. ; OpenSim/Regions/Physics/BulletSPlugin/BSParam.cs.
  794. ; There are two bullet physics libraries, bulletunmanaged is the default and is a
  795. ; native c++ dll bulletxna is a managed C# dll. They have comparible functionality
  796. ; but the c++ one is much faster.
  797. BulletEngine = "bulletunmanaged"
  798. ; BulletEngine = "bulletxna"
  799. ; BulletSim can run on its own thread independent of the simulator's heartbeat
  800. ; thread. Enabling this will nto let the physics engine slow down avatar movement, etc.
  801. UseSeparatePhysicsThread = false
  802. ; Terrain implementation can use either Bullet's heightField or BulletSim can build
  803. ; a mesh. 0=heightField, 1=mesh
  804. TerrainImplementation = 0
  805. ; For mesh terrain, the detail of the created mesh. '1' gives 256x256 (heightfield
  806. ; resolution). '2' gives 512x512. Etc. Cannot be larger than '4'. Higher
  807. ; magnifications use lots of memory.
  808. TerrainMeshMagnification = 2
  809. ; Avatar physics height adjustments.
  810. ; http://opensimulator.org/wiki/BulletSim#Adjusting_Avatar_Height
  811. AvatarHeightLowFudge = -0.2 ; Adjustment at low end of height range
  812. AvatarHeightMidFudge = 0.1 ; Adjustment at mid point of avatar height range
  813. AvatarHeightHighFudge = 0.1 ; Adjustment at high end of height range
  814. ; Default linkset implmentation
  815. ; 'Constraint' uses physics constraints to hold linkset together. 'Compound'
  816. ; builds a compound shape from the children shapes to create a single physical
  817. ; shape. 'Compound' uses a lot less CPU time.
  818. LinkImplementation = 1 ; 0=constraint, 1=compound
  819. ; If 'true', offset a linkset's origin based on mass of linkset parts.
  820. LinksetOffsetCenterOfMass = false
  821. ; If 'true', turn scuplties into meshes
  822. MeshSculptedPrim = true
  823. ; If 'true', force simple prims (box and sphere) to be meshed
  824. ; If 'false', the Bullet native special case shape is used for square rectangles
  825. ; and even dimensioned spheres.
  826. ForceSimplePrimMeshing = false
  827. ; If 'true', when creating meshes, remove all triangles that have two equal vertexes.
  828. ; Happens often in sculpties. If turned off, there will be some doorways
  829. ; that cannot be walked through.
  830. ShouldRemoveZeroWidthTriangles = true
  831. ; If 'true', use convex hull definition in mesh asset if present.
  832. ShouldUseAssetHulls = true
  833. ; If there are thousands of physical objects, these maximums should be increased.
  834. MaxCollisionsPerFrame = 2048
  835. MaxUpdatesPerFrame = 8192
  836. ; Detailed physics debug logging. Very verbose.
  837. PhysicsLoggingEnabled = False
  838. PhysicsLoggingDir = "."
  839. VehicleLoggingEnabled = False
  840. [RemoteAdmin]
  841. enabled = false
  842. ; Set this to a nonzero value to have remote admin use a different port
  843. port = 0
  844. ; Set this to the ip address that you want the admin server to bind to
  845. bind_ip_address = "0.0.0.0"
  846. ; This password is required to make any XMLRPC call (should be set as the "password" parameter)
  847. access_password = unknown
  848. ; List the IP addresses allowed to call RemoteAdmin
  849. ; If access_ip_addresses isn't set, then all IP addresses can access RemoteAdmin.
  850. ; access_ip_addresses = 0.0.0.0, 0.0.0.0 ...
  851. ; access_ip_addresses =
  852. ; set this variable to true if you want the create_region XmlRpc
  853. ; call to unconditionally enable voice on all parcels for a newly
  854. ; created region [default: false]
  855. create_region_enable_voice = false
  856. ; set this variable to false if you want the create_region XmlRpc
  857. ; call to create all regions as private per default (can be
  858. ; overridden in the XmlRpc call) [default: true]
  859. create_region_public = false
  860. ; the create_region XmlRpc call uses region_file_template to generate
  861. ; the file name of newly create regions (if they are created
  862. ; persistent). the parameter available are:
  863. ; {0} - X location
  864. ; {1} - Y location
  865. ; {2} - region UUID
  866. ; {3} - region port
  867. ; {4} - region name with " ", ":", "/" mapped to "_"
  868. region_file_template = "{0}x{1}-{2}.ini"
  869. ; we can limit the number of regions that XmlRpcCreateRegion will
  870. ; allow by setting this to a positive, non-0 number: as long as the
  871. ; number of regions is below region_limits, XmlRpcCreateRegion will
  872. ; succeed. setting region_limit to 0 disables the check.
  873. ; default is 0
  874. ;region_limit = 0
  875. ; enable only those methods you deem to be appropriate using a | delimited whitelist
  876. ; for example, enabled_methods = admin_broadcast|admin_region_query|admin_save_oar|admin_save_xml
  877. ; if this parameter is not specified but enabled = true, all methods will be available
  878. enabled_methods = all
  879. ; specify the default appearance for an avatar created through the remote admin interface
  880. ; This will only take effect is the file specified by the default_appearance setting below exists
  881. ;default_male = Default Male
  882. ;default_female = Default Female
  883. ; update appearance copies inventory items and wearables of default avatars. if this value is false
  884. ; (default), just worn assets are copied to the Clothes folder; if true, all Clothes and Bodyparts
  885. ; subfolders are copied. the receiver will wear the same items the default avatar did wear.
  886. ;copy_folders = false
  887. ; path to default appearance XML file that specifies the look of the default avatars
  888. ;default_appearance = default_appearance.xml
  889. ; RestPlugins are not currently operational.
  890. ;[RestPlugins]
  891. ; ; Change this to true to enable REST Plugins. This must be true if you wish to use
  892. ; ; REST Region or REST Asset and Inventory Plugins
  893. ; enabled = false
  894. ; god_key = SECRET
  895. ; prefix = /admin
  896. ;[RestRegionPlugin]
  897. ; ; Change this to true to enable the REST Region Plugin
  898. ; enabled = false
  899. ;[RestHandler]
  900. ; ; Change this to true to enable the REST Asset and Inventory Plugin
  901. ; enabled = false
  902. ; authenticate = true
  903. ; secured = true
  904. ; extended-escape = true
  905. ; realm = OpenSim REST
  906. ; dump-asset = false
  907. ; path-fill = true
  908. ; dump-line-size = 32
  909. ; flush-on-error = true
  910. ; IRC bridge is experimental, so if it breaks... keep both parts... yada yada
  911. ; also, not good error detection when it fails
  912. [IRC]
  913. enabled = false; you need to set this to true otherwise it won't connect
  914. ;server = name.of.irc.server.on.the.net
  915. ;; user password - only use this if the server requires one
  916. ;password = mypass
  917. ;nick = OpenSimBotNameProbablyMakeThisShorter
  918. ;channel = #the_irc_channel_you_want_to_connect_to
  919. ;user = "USER OpenSimBot 8 * :I'm an OpenSim to IRC bot"
  920. ;port = 6667
  921. ;; channel to listen for configuration commands
  922. ;commands_enabled = false
  923. ;command_channel = 2777
  924. ;report_clients = true
  925. ;; relay private chat connections
  926. ;; relay_private_channels = true: will relay IRC chat from/to private in-world channels
  927. ;; relay_private_channel_out -- channel to send messages out to the IRC bridge
  928. ;; relay_private_channel_in -- channel to receive message from the IRC bridge
  929. ;; relay_chat = false: IRC bridge will not relay normal chat
  930. ;; access_password -- simple security device
  931. ;;
  932. ;; so, to just relay chat from an IRC channel to in-world region and vice versa:
  933. ;;
  934. ;; relay_private_channels = false
  935. ;; relay_chat = true
  936. ;;
  937. ;; to relay chat only to/from private in-world channels:
  938. ;;
  939. ;; relay_chat = false
  940. ;; relay_private_channels = true
  941. ;; relay_private_channel_in = 2226
  942. ;; relay_private_channel_out = 2225
  943. ;;
  944. ;; in this example, all chat coming in from IRC will be send out via
  945. ;; in-world channel 2226, and all chat from in-world channel 2225 will
  946. ;; be relayed to the IRC channel.
  947. ;;
  948. ;relay_private_channels = false
  949. ;relay_private_channel_in = 2226
  950. ;relay_private_channel_out = 2225
  951. ;relay_chat = true
  952. ;access_password = foobar
  953. ;;fallback_region = name of "default" region
  954. ;;MSGformat fields : 0=botnick, 1=user, 2=region, 3=message
  955. ;; must start with "PRIVMSG {0} : " or irc server will get upset
  956. ;;for <bot>:<user in region> :<message>
  957. ;;msgformat = "PRIVMSG {0} :<{1} in {2}>: {3}"
  958. ;;for <bot>:<message> - <user of region> :
  959. ;msgformat = "PRIVMSG {0} : {3} - {1} of {2}"
  960. ;;for <bot>:<message> - from <user> :
  961. ;;msgformat = "PRIVMSG {0} : {3} - from {1}"
  962. ;; exclude_list allows you to stop the IRC connector from announcing the
  963. ;;arrival and departure of certain users. For example: admins, bots.
  964. ;exclude_list=User 1,User 2,User 3
  965. ;;Shows modal alertbox for entering agent on IRC enabled regions
  966. ;;
  967. ;; Enable Alert, default = false
  968. ;alert_show = false
  969. ;;
  970. ;; Show IRC serverinfo, default = true
  971. ;alert_show_serverinfo = true
  972. ;;
  973. ;alert_msg_pre = "This region is linked to Irc."
  974. ;alert_msg_post = "Everything you say in public chat can be listened."
  975. ; The following settings control the progression of daytime
  976. ; in the Sim. The defaults are the same as the commented out settings
  977. [Sun]
  978. ; number of wall clock hours for an opensim day. 24.0 would mean realtime
  979. ;day_length = 4
  980. ; Year length in days
  981. ;year_length = 60
  982. ; Day to Night Ratio
  983. ;day_night_offset = 0.45
  984. ; send a Sun update every update_interval # of frames. A lower number will
  985. ; make for smoother sun transition at the cost of network
  986. ;update_interval = 100
  987. [Wind]
  988. ; Enables the wind module. Default is true
  989. enabled = true
  990. ; How often should wind be updated, as a function of world frames. Approximately 50 frames a second
  991. wind_update_rate = 150
  992. ; The Default Wind Plugin to load
  993. wind_plugin = SimpleRandomWind
  994. ; These settings are specific to the ConfigurableWind plugin
  995. ; To use ConfigurableWind as the default, simply change wind_plugin to ConfigurableWind and uncomment the following.
  996. ; avg_strength = 5.0
  997. ; avg_direction = 0.0
  998. ; var_strength = 0.0
  999. ; var_direction = 0.0
  1000. ; rate_change = 1.0
  1001. ; This setting is specific to the SimpleRandomWind plugin
  1002. ; Adjusts wind strength. 0.0 = no wind, 1.0 = normal wind. Default is 1.0
  1003. strength = 1.0
  1004. [Cloud]
  1005. ; Enable this to generate classic particle clouds above the sim.
  1006. ; default is disabled - turn it on here
  1007. enabled = false
  1008. ; Density of cloud cover 0.0 to 1.0 Defult 0.5
  1009. density = 0.5
  1010. ; update interval for the cloud cover data returned by llCloud().
  1011. ; default is 1000
  1012. cloud_update_rate = 1000
  1013. [LightShare]
  1014. ; This enables the transmission of Windlight scenes to supporting clients, such as the Meta7 viewer.
  1015. ; It has no ill effect on viewers which do not support server-side windlight settings.
  1016. enable_windlight = false
  1017. [Trees]
  1018. ; Enable this to allow the tree module to manage your sim trees, including growing, reproducing and dying
  1019. ; default is false
  1020. active_trees = false
  1021. ; Density of tree population
  1022. tree_density = 1000.0
  1023. [VectorRender]
  1024. ; the font to use for rendering text (default: Arial)
  1025. ; font_name = "Arial"
  1026. [LL-Functions]
  1027. ; Set the following to true to allow administrator owned scripts to execute console commands
  1028. ; currently unused
  1029. ; AllowosConsoleCommand=false
  1030. ; Are god functions such as llSetObjectPermMask() allowed? If true then gods and only gods have access to these functions.
  1031. ; If false then gods cannot execute these functions either.
  1032. AllowGodFunctions = false
  1033. ; Maximum number of llListen events we allow over the entire region.
  1034. ; Set this to 0 to have no limit imposed
  1035. max_listens_per_region = 1000
  1036. ; Maximum number of llListen events we allow per script
  1037. ; Set this to 0 to have no limit imposed.
  1038. max_listens_per_script = 64
  1039. ; Maximum number of external urls that scripts can set up in this simulator (e.g. via llRequestURL())
  1040. max_external_urls_per_simulator = 100
  1041. [DataSnapshot]
  1042. ; The following set of configs pertains to search.
  1043. ; Set index_sims to true to enable search engines to index your searchable data
  1044. ; If false, no data will be exposed, DataSnapshot module will be off, and you can ignore the rest of these search-related configs
  1045. ; default is false
  1046. index_sims = false
  1047. ; The variable data_exposure controls what the regions expose:
  1048. ; minimum: exposes only things explicitly marked for search
  1049. ; all: exposes everything
  1050. data_exposure = minimum
  1051. ; If search is on, change this to your grid name; will be ignored for standalones
  1052. gridname = "OSGrid"
  1053. ; Period between data snapshots, in seconds. 20 minutes, for starters, so that you see the initial changes fast.
  1054. ; Later, you may want to increase this to 3600 (1 hour) or more
  1055. default_snapshot_period = 1200
  1056. ; This will be created in bin, if it doesn't exist already. It will hold the data snapshots.
  1057. snapshot_cache_directory = "DataSnapshot"
  1058. ; This semicolon-separated string serves to notify specific data services about the existence
  1059. ; of this sim. Uncomment if you want to index your data with this and/or other search providers.
  1060. ;data_services="http://metaverseink.com/cgi-bin/register.py"
  1061. [Economy]
  1062. ; These economy values get used in the BetaGridLikeMoneyModule. - This module is for demonstration only -
  1063. ; The default economy module only implements just enough to allow free actions (transfer of objects, etc).
  1064. ; There is no intention to implement anything further in core OpenSimulator.
  1065. ; This functionality has to be provided by third party modules.
  1066. ;; Enables selling things for $0. Default is true.
  1067. SellEnabled = true
  1068. ;; Money Unit fee to upload textures, animations etc. Default is 0.
  1069. PriceUpload = 0
  1070. ;; Money Unit fee to create groups. Default is 0.
  1071. PriceGroupCreate = 0
  1072. ; We don't really know what the rest of these values do. These get sent to the client
  1073. ; These taken from Agni at a Public Telehub. Change at your own risk.
  1074. ObjectCount = 0
  1075. PriceEnergyUnit = 100
  1076. PriceObjectClaim = 10
  1077. PricePublicObjectDecay = 4
  1078. PricePublicObjectDelete = 4
  1079. PriceParcelClaim = 1
  1080. PriceParcelClaimFactor = 1
  1081. PriceRentLight = 5
  1082. TeleportMinPrice = 2
  1083. TeleportPriceExponent = 2
  1084. EnergyEfficiency = 1
  1085. PriceObjectRent = 1
  1086. PriceObjectScaleFactor = 10
  1087. PriceParcelRent = 1
  1088. [XEngine]
  1089. ; Enable this engine in this OpenSim instance
  1090. Enabled = true
  1091. ; How many threads to keep alive even if nothing is happening
  1092. MinThreads = 2
  1093. ; How many threads to start at maximum load
  1094. MaxThreads = 100
  1095. ; Time a thread must be idle (in seconds) before it dies
  1096. IdleTimeout = 60
  1097. ; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal", "Highest")
  1098. Priority = "BelowNormal"
  1099. ; Maximum number of events to queue for a script (excluding timers)
  1100. MaxScriptEventQueue = 300
  1101. ; Stack size per thread created
  1102. ThreadStackSize = 262144
  1103. ; Set this to true (the default) to load each script into a separate
  1104. ; AppDomain. Setting this to false will load all script assemblies into the
  1105. ; current AppDomain, which will reduce the per-script overhead at the
  1106. ; expense of reduced security and the inability to garbage collect the
  1107. ; script assemblies
  1108. AppDomainLoading = true
  1109. ; Controls whether previously compiled scripts DLLs are deleted on sim restart. If you set this to false
  1110. ; then startup will be considerably faster since scripts won't need to be recompiled. However, then it becomes your responsibility to delete the
  1111. ; compiled scripts if you're recompiling OpenSim from source code and internal interfaces used
  1112. ; by scripts have changed.
  1113. ; DeleteScriptsOnStartup = false
  1114. ; Controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op)
  1115. ; co-op will be more stable but this option is currently experimental.
  1116. ; If moving from co-op to abort, existing script DLLs will need to be recompiled.
  1117. ; This currently can only be done manually, either by setting DeleteScriptsOnStartup = true for one run
  1118. ; or by deleting the script DLL* files in bin/ScriptEngines/<region-id>/
  1119. ; One can move from co-op back to abort without recompilation, but reverting back to co-op again will need script recompile
  1120. ScriptStopStrategy = abort
  1121. ; Rate to poll for asynchronous command replies (ms)
  1122. ; currently unused
  1123. ;AsyncLLCommandLoopms = 50
  1124. ; Save the source of all compiled scripts
  1125. WriteScriptSourceToDebugFile = false
  1126. ; Default language for scripts
  1127. DefaultCompileLanguage = lsl
  1128. ; List of allowed languages (lsl,vb,cs)
  1129. ; AllowedCompilers=lsl,cs,vb
  1130. ; *warning*, non lsl languages have access to static methods such as System.IO.File. Enable at your own risk.
  1131. AllowedCompilers=lsl
  1132. ; Compile debug info (line numbers) into the script assemblies
  1133. CompileWithDebugInformation = true
  1134. ; Allow the user of mod* functions. This allows a script to pass messages
  1135. ; to a region module via the modSendCommand() function
  1136. ; Default is false
  1137. AllowMODFunctions = false
  1138. ; Allow the use of os* functions (some are dangerous)
  1139. AllowOSFunctions = false
  1140. ; Allow the user of LightShare functions
  1141. AllowLightShareFunctions = false
  1142. ; Threat level to allow, one of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
  1143. OSFunctionThreatLevel = VeryLow
  1144. ; OS Functions enable/disable
  1145. ; For each function, you can add one line, as shown
  1146. ; The default for all functions allows them if below threat level
  1147. ; true allows the use of the function unconditionally
  1148. ; Allow_osSetRegionWaterHeight = true
  1149. ; false disables the function completely
  1150. ; Allow_osSetRegionWaterHeight = false
  1151. ; Comma separated list of UUIDS allows the function for that list of UUIDS
  1152. ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb
  1153. ; Comma separated list of owner classes that allow the function for a particular class of owners. Choices are
  1154. ; - PARCEL_GROUP_MEMBER: allow if objectgroup is the same group as the parcel
  1155. ; - PARCEL_OWNER: allow if the objectowner is parcelowner
  1156. ; - ESTATE_MANAGER: allow if the object owner is a estate manager
  1157. ; - ESTATE_OWNER: allow if objectowner is estateowner
  1158. ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb, PARCEL_OWNER, ESTATE_OWNER>, ...
  1159. ; You can also use script creators as the uuid
  1160. ; Creators_osSetRegionWaterHeight = <uuid>, ...
  1161. ; If both Allow_ and Creators_ are given, effective permissions
  1162. ; are the union of the two.
  1163. ; Interval (s) between background save of script states
  1164. SaveInterval = 120
  1165. ; Interval (s) between maintenance runs (0 = disable)
  1166. MaintenanceInterval = 10
  1167. ; Time a script can spend in an event handler before it is interrupted
  1168. EventLimit = 30
  1169. ; If a script overruns it's event limit, kill the script?
  1170. KillTimedOutScripts = false
  1171. ; Amount of time in milliseconds we will wait for an event to completely normally when a script stop is requested
  1172. ; before aborting the thread (such as when an object containing scripts is taken into inventory).
  1173. WaitForEventCompletionOnScriptStop = 1000;
  1174. ; Sets the multiplier for the scripting delays
  1175. ScriptDelayFactor = 1.0
  1176. ; The factor the 10 m distances llimits are multiplied by
  1177. ScriptDistanceLimitFactor = 1.0
  1178. ; Maximum length of notecard line read
  1179. ; Increasing this to large values potentially opens
  1180. ; up the system to malicious scripters
  1181. ; NotecardLineReadCharsMax = 255
  1182. ; Minimum settable timer interval. Any timer setting less than this is
  1183. ; rounded up to this minimum interval.
  1184. ; MinTimerInterval = 0.5
  1185. ; Sensor settings
  1186. SensorMaxRange = 96.0
  1187. SensorMaxResults = 16
  1188. ; Allow for llCreateLink and llBreakLink to work without asking for permission
  1189. ; only enable this in a trusted environment otherwise you may be subject to hijacking
  1190. ; AutomaticLinkPermission = false
  1191. ; Disable underground movement of prims (default true); set to
  1192. ; false to allow script controlled underground positioning of
  1193. ; prims
  1194. ; DisableUndergroundMovement = true
  1195. ;; Path to script assemblies
  1196. ; ScriptEnginesPath = "ScriptEngines"
  1197. [Concierge]
  1198. ; Enable concierge module
  1199. ; Default is false
  1200. enabled = false
  1201. ; name of the concierge
  1202. whoami = "jeeves"
  1203. ; password for updating the welcome message templates via XmlRpc
  1204. password = SECRET
  1205. ; regex specifying for which regions concierge service is desired; if
  1206. ; empty, then for all
  1207. regions = "^MeetingSpace-"
  1208. ; for each region that matches the regions regexp you can provide
  1209. ; (optionally) a welcome template using format substitution:
  1210. ; {0} is replaced with the name of the avatar entering the region
  1211. ; {1} is replaced with the name of the region
  1212. ; {2} is replaced with the name of the concierge (whoami variable above)
  1213. welcomes = /path/to/welcome/template/directory
  1214. ; Concierge can send attendee lists to an event broker whenever an
  1215. ; avatar enters or leaves a concierged region. the URL is subject
  1216. ; to format substitution:
  1217. ; {0} is replaced with the region's name
  1218. ; {1} is replaced with the region's UUID
  1219. broker = "http://broker.place.com/{1}"
  1220. [MRM]
  1221. ; Enables the Mini Region Modules Script Engine.
  1222. ; default is false
  1223. Enabled = false
  1224. ; Runs MRM in a Security Sandbox
  1225. ; WARNING: DISABLING IS A SECURITY RISK.
  1226. Sandboxed = true
  1227. ; The level sandbox to use, adjust at your OWN RISK.
  1228. ; Valid values are:
  1229. ; * FullTrust
  1230. ; * SkipVerification
  1231. ; * Execution
  1232. ; * Nothing
  1233. ; * LocalIntranet
  1234. ; * Internet
  1235. ; * Everything
  1236. SandboxLevel = "Internet"
  1237. ; Only allow Region Owners to run MRMs
  1238. ; May represent a security risk if you disable this.
  1239. OwnerOnly = true
  1240. [Hypergrid]
  1241. ; Keep it false for now. Making it true requires the use of a special client in order to access inventory
  1242. safemode = false
  1243. [VivoxVoice]
  1244. ; The VivoxVoice module will allow you to provide voice on your
  1245. ; region(s). It uses the same voice technology as the LL grid and
  1246. ; works with recent LL clients (we have tested 1.22.9.110075, so
  1247. ; anything later ought to be fine as well).
  1248. ;
  1249. ; For this to work you need to obtain an admin account from Vivox
  1250. ; that allows you to create voice accounts and region channels.
  1251. enabled = false
  1252. ; vivox voice server
  1253. vivox_server = www.foobar.vivox.com
  1254. ; vivox SIP URI
  1255. vivox_sip_uri = foobar.vivox.com
  1256. ; vivox admin user name
  1257. vivox_admin_user = DeepThroat
  1258. ; vivox admin password
  1259. vivox_admin_password = VoiceG4te
  1260. ; channel type: "channel" or "positional"
  1261. ; - positional: spatial sound (default)
  1262. ; - channel: normal "conference call", no spatial sound
  1263. ;vivox_channel_type = positional
  1264. ; channel characteristics (unless you know what you are doing, i'd
  1265. ; leave them as they are --- now you WILL muck around with them,
  1266. ; huh? sigh)
  1267. ; channel distance model:
  1268. ; 0 - no attenuation
  1269. ; 1 - inverse distance attenuation
  1270. ; 2 - linear attenuation (default)
  1271. ; 3 - exponential attenuation
  1272. ;vivox_channel_distance_model = 2
  1273. ; channel mode:
  1274. ; - "open" (default)
  1275. ; - "lecture"
  1276. ; - "presentation"
  1277. ; - "auditorium"
  1278. ;vivox_channel_mode = "open"
  1279. ; channel roll off: rate of attenuation
  1280. ; - a value between 1.0 and 4.0, default is 2.0
  1281. ;vivox_channel_roll_off = 2.0
  1282. ; channel max range: distance at which channel is silent
  1283. ; - a value between 0 and 160, default is 80
  1284. ;vivox_channel_max_range = 80
  1285. ; channel clamping distance: distance before attenuation applies
  1286. ; - a value between 0 and 160, default is 10
  1287. ;vivox_channel_clamping_distance = 10
  1288. [Groups]
  1289. Enabled = false
  1290. ; This is the current groups stub in Region.CoreModules.Avatar.Groups. All the other settings below only really
  1291. ; apply to the Flotsam/SimianGrid GroupsModule
  1292. Module = Default
  1293. ; This module can use a PHP XmlRpc server from the Flotsam project at http://code.google.com/p/flotsam/
  1294. ; or from the SimianGrid project at http://code.google.com/p/openmetaverse
  1295. ;Module = GroupsModule
  1296. ; Enable Group Notices
  1297. ;NoticesEnabled = true
  1298. ; This makes the Groups modules very chatty on the console.
  1299. DebugEnabled = false
  1300. ; Groups data is cached for this number of seconds before another request is made to the groups service
  1301. ; Set to 0 to disable the cache.
  1302. ; Default is 30 seconds
  1303. GroupsCacheTimeout = 30
  1304. ; Specify which messaging module to use for groups messaging and if it's enabled
  1305. MessagingModule = GroupsMessagingModule
  1306. ;MessagingEnabled = true
  1307. ; Experimental option to only message cached online users rather than all users
  1308. ; Should make large group with few online members messaging faster, as the expense of more calls to ROBUST presence service
  1309. ; (Flotsam groups only; in V2 this is always on)
  1310. MessageOnlineUsersOnly = false
  1311. ; Service connectors to the Groups Service. Select one depending on whether you're using a Flotsam XmlRpc backend or a SimianGrid backend
  1312. ; SimianGrid Service for Groups
  1313. ;ServicesConnectorModule = SimianGroupsServicesConnector
  1314. ;GroupsServerURI = http://mygridserver.com:82/Grid/
  1315. ; Flotsam XmlRpc Service for Groups
  1316. ;ServicesConnectorModule = XmlRpcGroupsServicesConnector
  1317. ;GroupsServerURI = http://yourxmlrpcserver.com/xmlrpc.php
  1318. ; XmlRpc Security settings. These must match those set on your backend groups service if the service is using these keys
  1319. ;XmlRpcServiceReadKey = 1234
  1320. ;XmlRpcServiceWriteKey = 1234
  1321. ; Disables HTTP Keep-Alive for XmlRpcGroupsServicesConnector HTTP Requests,
  1322. ; this is a work around fora problem discovered on some Windows based region servers.
  1323. ; Only disable keep alive if you see a large number (dozens) of the following Exceptions:
  1324. ; System.Net.WebException: The request was aborted: The request was canceled.
  1325. ; XmlRpcDisableKeepAlive = false
  1326. ; Minimum user level required to create groups
  1327. ;LevelGroupCreate = 0
  1328. [PacketPool]
  1329. ;RecyclePackets = true;
  1330. ;RecycleDataBlocks = true;
  1331. ; If true, then the basic packet objects used to receive data are also recycled, not just the LLUDP packets.
  1332. ; This reduces data churn
  1333. RecycleBaseUDPPackets = true
  1334. [InterestManagement]
  1335. ; This section controls how state updates are prioritized for each client
  1336. ; Valid values are BestAvatarResponsiveness, Time, Distance,
  1337. ; SimpleAngularDistance, and FrontBack
  1338. UpdatePrioritizationScheme = BestAvatarResponsiveness
  1339. ReprioritizationEnabled = true
  1340. ReprioritizationInterval = 2000.0
  1341. RootReprioritizationDistance = 10.0
  1342. ChildReprioritizationDistance = 20.0
  1343. [Monitoring]
  1344. ; Enable region monitoring
  1345. ; If true, this will print out an error if more than a minute has passed since the last simulator frame
  1346. ; Also is another source of region statistics provided via the regionstats URL
  1347. Enabled = true
  1348. [WebStats]
  1349. ; View region statistics via a web page
  1350. ; See http://opensimulator.org/wiki/FAQ#Region_Statistics_on_a_Web_Page
  1351. ; Use a web browser and type in the "Login URI" + "/SStats/"
  1352. ; For example- http://127.0.0.1:9000/SStats/
  1353. ; enabled=false
  1354. [MediaOnAPrim]
  1355. ; Enable media on a prim facilities
  1356. Enabled = true;
  1357. [NPC]
  1358. ;; Enable Non Player Character (NPC) facilities
  1359. Enabled = false
  1360. [Terrain]
  1361. InitialTerrain = "pinhead-island"
  1362. ;;
  1363. ;; If you are using a simian grid frontend you can enable
  1364. ;; this module to upload tile images for the mapping fn
  1365. ;;
  1366. [SimianGridMaptiles]
  1367. Enabled = False
  1368. MaptileURL = "http://www.mygrid.com/Grid/"
  1369. RefreshTime = 3600
  1370. ;;
  1371. ;; JsonStore module provides structured store for scripts
  1372. ;;
  1373. [JsonStore]
  1374. Enabled = False
  1375. ;; Enable direct access to the SOP dynamic attributes
  1376. EnableObjectStore = False
  1377. MaxStringSpace = 0
  1378. ;;
  1379. ;; These are defaults that are overwritten below in [Architecture].
  1380. ;; These defaults allow OpenSim to work out of the box with
  1381. ;; zero configuration
  1382. ;;
  1383. [AssetService]
  1384. DefaultAssetLoader = "OpenSim.Framework.AssetLoader.Filesystem.dll"
  1385. AssetLoaderArgs = "assets/AssetSets.xml"
  1386. ; Disable this to prevent the default asset set from being inserted into the
  1387. ; asset store each time the region starts
  1388. AssetLoaderEnabled = true
  1389. [GridService]
  1390. ;; default standalone, overridable in StandaloneCommon.ini
  1391. StorageProvider = "OpenSim.Data.Null.dll:NullRegionData"
  1392. [AutoBackupModule]
  1393. ;; default is module is disabled at the top level
  1394. AutoBackupModuleEnabled = false
  1395. [Sounds]
  1396. ;; {Module} {} {Implementation of ISoundModule to use.} {OpenSim.Region.CoreModules.dll:SoundModule}
  1397. Module = OpenSim.Region.CoreModules.dll:SoundModule
  1398. ;; {MaxDistance} {} {Cut-off distance at which sounds will not be sent to users} {100.0}
  1399. MaxDistance = 100.0
  1400. [ServiceThrottle]
  1401. ;; Default time interval (in ms) for the throttle service thread to wake up
  1402. Interval = 5000
  1403. [Dwell]
  1404. ;; This enables the built in basic dwell module
  1405. DwellModule = DefaultDwellModule
  1406. [Modules]
  1407. Include-modules = "addon-modules/*/config/*.ini"