/*
* Copyright (c) Contributors, http://opensimulator.org/
* See CONTRIBUTORS.TXT for a full list of copyright holders.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of the OpenSimulator Project nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
using OpenMetaverse;
using OpenMetaverse.Packets;
using OpenSim.Framework;
using OpenSim.Region.Framework.Interfaces;
using OpenSim.Region.Framework.Scenes.Serialization;
using OpenSim.Region.PhysicsModules.SharedBase;
using System;
using System.Collections.Generic;
using System.Drawing;
using System.Linq;
using System.Threading;
using System.Xml;
using PermissionMask = OpenSim.Framework.PermissionMask;
namespace OpenSim.Region.Framework.Scenes
{
// this is not the right place for this
// for now it must match similar enums duplicated on scritp engines
public enum ScriptEventCode : int
{
None = -1,
attach = 0,
state_exit = 1,
timer = 2,
touch = 3,
collision = 4,
collision_end = 5,
collision_start = 6,
control = 7,
dataserver = 8,
email = 9,
http_response = 10,
land_collision = 11,
land_collision_end = 12,
land_collision_start = 13,
at_target = 14,
listen = 15,
money = 16,
moving_end = 17,
moving_start = 18,
not_at_rot_target = 19,
not_at_target = 20,
touch_start = 21,
object_rez = 22,
remote_data = 23,
at_rot_target = 24,
transaction_result = 25,
//
//
run_time_permissions = 28,
touch_end = 29,
state_entry = 30,
//
//
changed = 33,
link_message = 34,
no_sensor = 35,
on_rez = 36,
sensor = 37,
http_request = 38,
path_update = 40,
linkset_data = 41,
// marks highest numbered event
Size = 42
}
// this is not the right place for this
// for now it must match similar enums duplicated on scritp engines
// ignore this flags, do not use .net flags handle, it is bad
[Flags]
public enum scriptEvents : ulong
{
None = 0,
attach = 1,
state_exit = 1UL << 1,
timer = 1UL << 2,
touch = 1UL << 3,
collision = 1UL << 4,
collision_end = 1UL << 5,
collision_start = 1UL << 6,
control = 1UL << 7,
dataserver = 1UL << 8,
email = 1UL << 9,
http_response = 1UL << 10,
land_collision = 1UL << 11,
land_collision_end = 1UL << 12,
land_collision_start = 1UL << 13,
at_target = 1UL << 14,
listen = 1UL << 15,
money = 1UL << 16,
moving_end = 1UL << 17,
moving_start = 1UL << 18,
not_at_rot_target = 1UL << 19,
not_at_target = 1UL << 20,
touch_start = 1UL << 21,
object_rez = 1UL << 22,
remote_data = 1UL << 23,
at_rot_target = 1UL << 24,
transaction_result = 1UL << 25,
//
//
run_time_permissions = 1UL << 28,
touch_end = 1UL << 29,
state_entry = 1UL << 30,
//
//
changed = 1UL << 33,
link_message = 1UL << 34,
no_sensor = 1UL << 35,
on_rez = 1UL << 36,
sensor = 1UL << 37,
http_request = 1UL << 38,
path_update = 1UL << 40,
linkset_data = 1UL << 41,
anytouch = touch | touch_end | touch_start,
anyTarget = at_target | not_at_target | at_rot_target | not_at_rot_target,
anyobjcollision = collision | collision_end | collision_start,
anylandcollision = land_collision | land_collision_end | land_collision_start
}
public struct scriptPosTarget
{
public Vector3 targetPos;
public float tolerance;
public int handle;
public UUID scriptID;
}
public struct scriptRotTarget
{
public Quaternion targetRot;
public float tolerance;
public int handle;
public UUID scriptID;
}
public delegate void PrimCountTaintedDelegate();
///
/// A scene object group is conceptually an object in the scene. The object is constituted of SceneObjectParts
/// (often known as prims), one of which is considered the root part.
///
public partial class SceneObjectGroup : EntityBase, ISceneObject, IDisposable
{
// Axis selection bitmask used by SetAxisRotation()
// Just happen to be the same bits used by llSetStatus() and defined in ScriptBaseClass.
public enum axisSelect : int
{
STATUS_ROTATE_X = 0x002,
STATUS_ROTATE_Y = 0x004,
STATUS_ROTATE_Z = 0x008,
NOT_STATUS_ROTATE_X = 0xFD,
NOT_STATUS_ROTATE_Y = 0xFB,
NOT_STATUS_ROTATE_Z = 0xF7
}
// private PrimCountTaintedDelegate handlerPrimCountTainted = null;
public bool IsViewerCachable
{
get
{
// needs more exclusion ?
return(Backup && !IsTemporary && !inTransit && !UsesPhysics && !IsSelected && !IsAttachmentCheckFull() &&
!RootPart.Shape.MeshFlagEntry && // animations are not sent correctly for now
RootPart.KeyframeMotion is null &&
(DateTime.UtcNow.Ticks - timeLastChanged > 3000000000) //&& //3000000000 is 5min
//(DateTime.UtcNow.Ticks - timeLastChanged > 36000000000) //&& //36000000000 is one hour
);
}
}
///
/// Signal whether the non-inventory attributes of any prims in the group have changed
/// since the group's last persistent backup
///
private bool m_hasGroupChanged = false;
private long timeFirstChanged = 0;
private long timeLastChanged = 0;
private long m_maxPersistTime = 0;
private long m_minPersistTime = 0;
///
/// This indicates whether the object has changed such that it needs to be repersisted to permenant storage
/// (the database).
///
///
/// Ultimately, this should be managed such that region modules can change it at the end of a set of operations
/// so that either all changes are preserved or none at all. However, currently, a large amount of internal
/// code will set this anyway when some object properties are changed.
///
public bool HasGroupChanged
{
set
{
if (value)
{
if (Backup)
m_scene.SceneGraph.FireChangeBackup(this);
timeLastChanged = DateTime.UtcNow.Ticks;
if (!m_hasGroupChanged)
timeFirstChanged = timeLastChanged;
if (m_rootPart is not null && m_scene is not null)
{
if (m_scene.GetRootAgentCount() == 0)
{
//If the region is empty, this change has been made by an automated process
//and thus we delay the persist time by a random amount between 1.5 and 2.5.
float factor = 2.0f;
m_maxPersistTime = (long)(m_scene.m_persistAfter * factor);
m_minPersistTime = (long)(m_scene.m_dontPersistBefore * factor);
}
else
{
m_maxPersistTime = m_scene.m_persistAfter;
m_minPersistTime = m_scene.m_dontPersistBefore;
}
}
}
m_hasGroupChanged = value;
//m_log.DebugFormat(
// "[SCENE OBJECT GROUP]: HasGroupChanged set to {0} for {1} {2}", m_hasGroupChanged, Name, LocalId);
}
get { return m_hasGroupChanged; }
}
public bool TemporaryInstance = false;
private bool m_groupContainsForeignPrims = false;
///
/// Whether the group contains prims that came from a different group. This happens when
/// linking or delinking groups. The implication is that until the group is persisted,
/// the prims in the database still use the old SceneGroupID. That's a problem if the group
/// is deleted, because we delete groups by searching for prims by their SceneGroupID.
///
public bool GroupContainsForeignPrims
{
private set
{
m_groupContainsForeignPrims = value;
if (m_groupContainsForeignPrims)
HasGroupChanged = true;
}
get { return m_groupContainsForeignPrims; }
}
public bool HasGroupChangedDueToDelink { get; set; }
private bool isTimeToPersist()
{
if (IsSelected || IsDeleted || IsAttachment)
return false;
if (!m_hasGroupChanged)
return false;
if (m_scene.ShuttingDown)
return true;
if (m_minPersistTime == 0 || m_maxPersistTime == 0)
{
m_maxPersistTime = m_scene.m_persistAfter;
m_minPersistTime = m_scene.m_dontPersistBefore;
}
long currentTime = DateTime.UtcNow.Ticks;
if (timeLastChanged == 0) timeLastChanged = currentTime;
if (timeFirstChanged == 0) timeFirstChanged = currentTime;
return currentTime - timeLastChanged > m_minPersistTime || currentTime - timeFirstChanged > m_maxPersistTime;
}
///
/// Is this scene object acting as an attachment?
///
public bool IsAttachment { get; set; }
///
/// The avatar to which this scene object is attached.
///
///
/// If we're not attached to an avatar then this is UUID.Zero
///
public UUID AttachedAvatar { get; set; }
///
/// Attachment point of this scene object to an avatar.
///
///
/// 0 if we're not attached to anything
///
public uint AttachmentPoint
{
get
{
return m_rootPart.Shape.State;
}
set
{
IsAttachment = value != 0;
m_rootPart.Shape.State = (byte)value;
}
}
///
/// If this scene object has an attachment point then indicate whether there is a point where
/// attachments are perceivable by avatars other than the avatar to which this object is attached.
///
///
/// HUDs are not perceivable by other avatars.
///
public bool HasPrivateAttachmentPoint
{
get
{
return AttachmentPoint >= (uint)OpenMetaverse.AttachmentPoint.HUDCenter2
&& AttachmentPoint <= (uint)OpenMetaverse.AttachmentPoint.HUDBottomRight;
}
}
public void ClearPartAttachmentData()
{
AttachmentPoint = 0;
// Don't zap trees
if (RootPart.Shape.PCode == (byte)PCode.Tree ||
RootPart.Shape.PCode == (byte)PCode.NewTree)
return;
// Even though we don't use child part state parameters for attachments any more, we still need to set
// these to zero since having them non-zero in rezzed scene objects will crash some clients. Even if
// we store them correctly, scene objects that we receive from elsewhere might not.
foreach (SceneObjectPart part in Parts)
part.Shape.State = 0;
}
///
/// Is this scene object phantom?
///
///
/// Updating must currently take place through UpdatePrimFlags()
///
public bool IsPhantom
{
get { return (RootPart.Flags & PrimFlags.Phantom) != 0; }
}
///
/// Does this scene object use physics?
///
///
/// Updating must currently take place through UpdatePrimFlags()
///
public bool UsesPhysics
{
get { return (RootPart.Flags & PrimFlags.Physics) != 0; }
}
///
/// Is this scene object temporary?
///
///
/// Updating must currently take place through UpdatePrimFlags()
///
public bool IsTemporary
{
get { return (RootPart.Flags & PrimFlags.TemporaryOnRez) != 0; }
}
public bool IsVolumeDetect
{
get { return RootPart.VolumeDetectActive; }
}
///
/// Is this entity set to be saved in persistent storage?
///
public bool Backup { get; private set; }
protected MapAndArray m_parts = new();
protected ulong m_regionHandle;
protected SceneObjectPart m_rootPart;
// private Dictionary m_scriptEvents = new Dictionary();
private Dictionary m_targets = new();
private Dictionary m_rotTargets = new();
private Dictionary> m_targetsByScript = new();
public Dictionary AtTargets
{
get { return m_targets; }
}
public Dictionary RotTargets
{
get { return m_rotTargets; }
}
private bool m_scriptListens_atTarget;
private bool m_scriptListens_notAtTarget;
private bool m_scriptListens_atRotTarget;
private bool m_scriptListens_notAtRotTarget;
public bool m_dupeInProgress = false;
internal Dictionary m_savedScriptState;
public UUID MonitoringObject { get; set; }
#region Properties
///
/// The name of an object grouping is always the same as its root part
///
public override string Name
{
get { return RootPart.Name; }
set { RootPart.Name = value; }
}
public string Description
{
get { return RootPart.Description; }
set { RootPart.Description = value; }
}
///
/// Added because the Parcel code seems to use it
/// but not sure a object should have this
/// as what does it tell us? that some avatar has selected it (but not what Avatar/user)
/// think really there should be a list (or whatever) in each scenepresence
/// saying what prim(s) that user has selected.
///
protected bool m_isSelected = false;
///
/// Number of prims in this group
///
public int PrimCount
{
get { return m_parts.Count; }
}
//protected Quaternion m_rotation = Quaternion.Identity;
//public virtual Quaternion Rotation
//{
// get { return m_rotation; }
// set { m_rotation = value; }
//}
public Quaternion GroupRotation
{
get { return m_rootPart.RotationOffset; }
}
public Vector3 GroupScale
{
get
{
SceneObjectPart[] parts = m_parts.GetArray();
SceneObjectPart part;
Vector3 partscale;
float ftmp;
float minScaleX = float.MaxValue;
float minScaleY = float.MaxValue;
float minScaleZ = float.MaxValue;
float maxScaleX = 0f;
float maxScaleY = 0f;
float maxScaleZ = 0f;
for (int i = 0; i < parts.Length; i++)
{
part = parts[i];
partscale = part.Scale + part.OffsetPosition;
ftmp = partscale.X;
if (ftmp < minScaleX)
minScaleX = ftmp;
if (ftmp > maxScaleX)
maxScaleX = ftmp;
ftmp = partscale.Y;
if (ftmp < minScaleY)
minScaleY = ftmp;
if (ftmp > maxScaleY)
maxScaleY = ftmp;
ftmp = partscale.Z;
if (ftmp < minScaleZ)
minScaleZ = ftmp;
if (ftmp > maxScaleZ)
maxScaleZ = ftmp;
}
partscale.X = (minScaleX > maxScaleX) ? minScaleX : maxScaleX;
partscale.Y = (minScaleY > maxScaleY) ? minScaleY : maxScaleY;
partscale.Z = (minScaleZ > maxScaleZ) ? minScaleZ : maxScaleZ;
return partscale;
}
}
public UUID GroupID
{
get { return m_rootPart.GroupID; }
set { m_rootPart.GroupID = value; }
}
public SceneObjectPart[] Parts
{
get { return m_parts.GetArray(); }
}
public bool ContainsPart(UUID partID)
{
return m_parts.ContainsKey(partID);
}
///
/// Does this group contain the given part?
///
///
public bool ContainsPart(uint localID)
{
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
if (parts[i].LocalId == localID)
return true;
}
return false;
}
///
/// The root part of this scene object
///
public SceneObjectPart RootPart
{
get { return m_rootPart; }
}
public ulong RegionHandle
{
get { return m_regionHandle; }
set
{
m_regionHandle = value;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
parts[i].RegionHandle = value;
}
}
///
/// Check both the attachment property and the relevant properties of the underlying root part.
///
///
/// This is necessary in some cases, particularly when a scene object has just crossed into a region and doesn't
/// have the IsAttachment property yet checked.
///
/// FIXME: However, this should be fixed so that this property
/// propertly reflects the underlying status.
///
///
public bool IsAttachmentCheckFull()
{
return (IsAttachment ||
(m_rootPart.Shape.PCode == (byte)PCodeEnum.Primitive && m_rootPart.Shape.State != 0));
}
private struct avtocrossInfo
{
public ScenePresence av;
public uint ParentID;
}
public LinksetData LinksetData;
public bool inTransit = false;
private delegate SceneObjectGroup SOGCrossDelegate(SceneObjectGroup sog,Vector3 pos, TeleportObjectData tpData);
///
/// The absolute position of this scene object in the scene
///
public override Vector3 AbsolutePosition
{
get { return m_rootPart.GroupPosition; }
set
{
Vector3 val = value;
if (Scene is not null
&& !Scene.PositionIsInCurrentRegion(val)
&& !IsAttachmentCheckFull()
&& !Scene.LoadingPrims
&& !Scene.DisableObjectTransfer
)
{
if (!inTransit)
{
inTransit = true;
SceneObjectGroup sog = this;
Util.FireAndForget(delegate
{
sog = CrossAsync(sog, val, null);
CrossAsyncCompleted(sog);
}, null, "ObjCross-"+sog.UUID.ToString(), false);
}
return;
}
if (RootPart.GetStatusSandbox())
{
if (Vector3.DistanceSquared(RootPart.StatusSandboxPos, value) > 100)
{
RootPart.ScriptSetPhysicsStatus(false);
Scene?.SimChat(Utils.StringToBytes("Hit Sandbox Limit"),
ChatTypeEnum.DebugChannel, 0x7FFFFFFF, RootPart.AbsolutePosition, Name, UUID, false);
return;
}
}
bool triggerScriptEvent;
if (m_dupeInProgress || IsDeleted)
triggerScriptEvent = false;
else
triggerScriptEvent = !m_rootPart.GroupPosition.ApproxEquals(val, 1e-3f);
m_rootPart.GroupPosition = val;
// Restuff the new GroupPosition into each child SOP of the linkset.
// this is needed because physics may not have linksets but just loose SOPs in world
SceneObjectPart[] parts = m_parts.GetArray();
foreach (SceneObjectPart part in parts)
{
if (part != m_rootPart)
part.GroupPosition = val;
}
foreach (ScenePresence av in m_sittingAvatars)
{
av.sitSOGmoved();
}
// now that position is changed tell it to scripts
if (triggerScriptEvent && (ScriptEvents & scriptEvents.changed) != 0)
{
foreach (SceneObjectPart part in parts)
{
part.TriggerScriptChangedEvent(Changed.POSITION);
}
}
Scene?.EventManager.TriggerParcelPrimCountTainted();
}
}
private SceneObjectGroup CrossAsync(SceneObjectGroup sog, Vector3 val, TeleportObjectData tpdata)
{
Scene sogScene = sog.m_scene;
SceneObjectPart root = sog.RootPart;
bool isTeleport = tpdata is not null;
if(!isTeleport)
{
if (root.DIE_AT_EDGE)
{
try
{
sogScene.DeleteSceneObject(sog, false);
}
catch (Exception)
{
m_log.Warn("[SCENE]: exception when trying to remove the prim that crossed the border.");
}
return sog;
}
if (root.RETURN_AT_EDGE)
{
// We remove the object here
try
{
List localIDs = new(){root.LocalId};
sogScene.AddReturn(sog.OwnerID, sog.Name, sog.AbsolutePosition,
"Returned at region cross");
sogScene.DeRezObjects(null, localIDs, UUID.Zero, DeRezAction.Return, UUID.Zero, false);
}
catch (Exception)
{
m_log.Warn("[SCENE]: exception when trying to return the prim that crossed the border.");
}
return sog;
}
}
//if(!m_scene.IsRunning)
// return sog;
root.KeyframeMotion?.StartCrossingCheck();
root.PhysActor?.CrossingStart();
IEntityTransferModule entityTransfer = sogScene.RequestModuleInterface();
if (entityTransfer is null)
return sog;
Vector3 newpos = Vector3.Zero;
OpenSim.Services.Interfaces.GridRegion destination = null;
destination = entityTransfer.GetObjectDestination(sog, val, out newpos);
if (destination is null)
return sog;
if (sog.m_sittingAvatars.Count == 0)
{
if(entityTransfer.CrossPrimGroupIntoNewRegion(destination, newpos, sog, !isTeleport, true))
return null;
return sog;
}
string reason = string.Empty;
EntityTransferContext ctx = new();
Vector3 curPos = root.GroupPosition;
foreach (ScenePresence av in sog.m_sittingAvatars)
{
// We need to cross these agents. First, let's find
// out if any of them can't cross for some reason.
// We have to deny the crossing entirely if any
// of them are banned. Alternatively, we could
// unsit banned agents....
// We set the avatar position as being the object
// position to get the region to send to
if(av.IsNPC)
continue;
if(av.IsInTransit)
return sog;
if(!entityTransfer.checkAgentAccessToRegion(av, destination, newpos, ctx, out reason))
return sog;
m_log.Debug($"[SCENE OBJECT]: Avatar {av.Name} needs to be crossed to {destination.RegionName}");
}
// We unparent the SP quietly so that it won't
// be made to stand up
List avsToCross = new();
List avsToCrossFar = new();
ulong destHandle = destination.RegionHandle;
List sittingAvatars = GetSittingAvatars();
foreach (ScenePresence av in sittingAvatars)
{
byte cflags = 1;
avtocrossInfo avinfo = new();
SceneObjectPart parentPart = sogScene.GetSceneObjectPart(av.ParentID);
if (parentPart is not null)
{
av.ParentUUID = parentPart.UUID;
if(parentPart.SitTargetAvatar.Equals(av.UUID))
cflags = 7; // low 3 bits set
else
cflags = 3;
}
if(!av.knowsNeighbourRegion(destHandle))
cflags |= 8;
// 1 is crossing
// 2 is sitting
// 4 is sitting at sittarget
// 8 far crossing
avinfo.av = av;
avinfo.ParentID = av.ParentID;
avsToCross.Add(avinfo);
if(!av.knowsNeighbourRegion(destHandle))
{
cflags |= 8;
avsToCrossFar.Add(av);
}
if(av.IsNPC)
av.m_crossingFlags = 0;
else
av.m_crossingFlags = cflags;
av.PrevSitOffset = av.OffsetPosition;
av.ParentID = 0;
}
Vector3 vel = root.Velocity;
Vector3 avel = root.AngularVelocity;
Vector3 acc = root.Acceleration;
Quaternion ori = root.RotationOffset;
if(isTeleport)
{
root.Stop();
sogScene.ForEachScenePresence(delegate(ScenePresence av)
{
av.ControllingClient.SendEntityUpdate(root,PrimUpdateFlags.SendInTransit);
av.ControllingClient.SendEntityTerseUpdateImmediate(root);
});
root.Velocity = tpdata.vel;
root.AngularVelocity = tpdata.avel;
root.Acceleration = tpdata.acc;
root.RotationOffset = tpdata.ori;
}
if (entityTransfer.CrossPrimGroupIntoNewRegion(destination, newpos, sog, true, false))
{
if(isTeleport)
{
sogScene.ForEachScenePresence(delegate(ScenePresence oav)
{
if(sittingAvatars.Contains(oav))
return;
if(oav.knowsNeighbourRegion(destHandle))
return;
oav.ControllingClient.SendEntityUpdate(root, PrimUpdateFlags.Kill);
foreach (ScenePresence sav in sittingAvatars)
{
sav.SendKillTo(oav);
}
});
}
bool crossedfar = false;
foreach (ScenePresence av in avsToCrossFar)
{
if(entityTransfer.CrossAgentCreateFarChild(av,destination, newpos, ctx))
crossedfar = true;
else
av.m_crossingFlags = 0;
}
if(crossedfar)
Thread.Sleep(1000);
foreach (avtocrossInfo avinfo in avsToCross)
{
ScenePresence av = avinfo.av;
av.IsInLocalTransit = true;
av.IsInTransit = true;
m_log.Debug($"[SCENE OBJECT]: Crossing avatar {av.Name} to {val}");
if(av.m_crossingFlags > 0)
entityTransfer.CrossAgentToNewRegionAsync(av, newpos, destination, false, ctx);
if (av.IsChildAgent)
{
// avatar crossed do some extra cleanup
if (av.ParentUUID.IsNotZero())
{
av.ClearControls();
av.ParentPart = null;
}
av.ParentUUID = UUID.Zero;
av.ParentPart = null;
// In any case
av.IsInTransit = false;
av.m_crossingFlags = 0;
m_log.Debug($"[SCENE OBJECT]: Crossing agent {av.Firstname} {av.Lastname} completed.");
}
else
{
// avatar cross failed we need do dedicated standUp
// part of it was done at CrossAgentToNewRegionAsync
// so for now just remove the sog controls
// this may need extra care
av.UnRegisterSeatControls(sog.UUID);
av.ParentUUID = UUID.Zero;
av.ParentPart = null;
Vector3 oldp = curPos;
oldp.X = Utils.Clamp(oldp.X, 0.5f, sog.m_scene.RegionInfo.RegionSizeX - 0.5f);
oldp.Y = Utils.Clamp(oldp.Y, 0.5f, sog.m_scene.RegionInfo.RegionSizeY - 0.5f);
av.AbsolutePosition = oldp;
av.m_crossingFlags = 0;
av.sitAnimation = "SIT";
av.IsInTransit = false;
av.Animator?.SetMovementAnimations("STAND");
av.AddToPhysicalScene(false);
sogScene.ForEachScenePresence(delegate(ScenePresence oav)
{
if(sittingAvatars.Contains(oav))
return;
if(oav.knowsNeighbourRegion(destHandle))
av.SendAvatarDataToAgent(oav);
else
{
av.SendAvatarDataToAgent(oav);
av.SendAppearanceToAgent(oav);
av.Animator?.SendAnimPackToClient(oav.ControllingClient);
av.SendAttachmentsToAgentNF(oav); // not ok
}
});
m_log.Debug($"[SCENE OBJECT]: Crossing agent {av.Firstname} {av.Lastname} failed.");
}
}
if(crossedfar)
{
Thread.Sleep(10000);
foreach (ScenePresence av in avsToCrossFar)
{
if(av.IsChildAgent)
{
av.Scene.CloseAgent(av.UUID, false);
}
else
av.RemoveNeighbourRegion(destHandle);
}
}
avsToCrossFar.Clear();
avsToCross.Clear();
sog.RemoveScriptInstances(true);
sog.Dispose();
return null;
}
else
{
if(isTeleport)
{
if((tpdata.flags & OSTPOBJ_STOPONFAIL) == 0)
{
root.Velocity = vel;
root.AngularVelocity = avel;
root.Acceleration = acc;
}
root.RotationOffset = ori;
}
foreach (avtocrossInfo avinfo in avsToCross)
{
ScenePresence av = avinfo.av;
av.ParentUUID = UUID.Zero;
av.ParentID = avinfo.ParentID;
av.m_crossingFlags = 0;
}
}
avsToCross.Clear();
return sog;
}
public void CrossAsyncCompleted(SceneObjectGroup sog)
{
if (sog is null || sog.IsDeleted)
return;
SceneObjectPart rootp = sog.m_rootPart;
Vector3 oldp = rootp.GroupPosition;
oldp.X = Utils.Clamp(oldp.X, 0.5f, sog.m_scene.RegionInfo.RegionSizeX - 0.5f);
oldp.Y = Utils.Clamp(oldp.Y, 0.5f, sog.m_scene.RegionInfo.RegionSizeY - 0.5f);
rootp.GroupPosition = oldp;
rootp.Stop();
SceneObjectPart[] parts = sog.m_parts.GetArray();
foreach (SceneObjectPart part in parts)
{
if (part != rootp)
part.GroupPosition = oldp;
}
foreach (ScenePresence av in sog.m_sittingAvatars)
{
av.sitSOGmoved();
}
sog.m_rootPart.KeyframeMotion?.CrossingFailure();
sog.RootPart.PhysActor?.CrossingFailure();
sog.inTransit = false;
AttachToBackup();
sog.ScheduleGroupForUpdate(PrimUpdateFlags.FullUpdatewithAnimMatOvr);
}
private class TeleportObjectData
{
public int flags;
public Vector3 vel;
public Vector3 avel;
public Vector3 acc;
public Quaternion ori;
public UUID sourceID;
}
// copy from LSL_constants.cs
const int OSTPOBJ_STOPATTARGET = 0x1; // stops at destination
const int OSTPOBJ_STOPONFAIL = 0x2; // stops at start if tp fails
const int OSTPOBJ_SETROT = 0x4; // the rotation is the final rotation, otherwise is a added rotation
public int TeleportObject(UUID sourceID, Vector3 targetPosition, Quaternion rotation, int flags)
{
if(inTransit || IsDeleted || IsAttachmentCheckFull() || IsSelected || Scene is null)
return -1;
inTransit = true;
PhysicsActor pa = RootPart.PhysActor;
if(/*pa is null ||*/ RootPart.KeyframeMotion is not null /*|| m_sittingAvatars.Count == 0*/)
{
inTransit = false;
return -1;
}
bool stop = (flags & OSTPOBJ_STOPATTARGET) != 0;
bool setrot = (flags & OSTPOBJ_SETROT) != 0;
rotation.Normalize();
Quaternion currentRot = RootPart.RotationOffset;
if(setrot)
rotation = Quaternion.Conjugate(currentRot) * rotation;
bool dorot = setrot || (Math.Abs(rotation.W) < 0.99999);
Vector3 vel = Vector3.Zero;
Vector3 avel = Vector3.Zero;
Vector3 acc = Vector3.Zero;
if(!stop)
{
vel = RootPart.Velocity;
avel = RootPart.AngularVelocity;
acc = RootPart.Acceleration;
}
Quaternion ori = RootPart.RotationOffset;
if(dorot)
{
if(!stop)
{
vel *= rotation;
avel *= rotation;
acc *= rotation;
}
ori *= rotation;
}
if(Scene.PositionIsInCurrentRegion(targetPosition))
{
if(Scene.InTeleportTargetsCoolDown(UUID, sourceID, 1000))
{
inTransit = false;
return -2;
}
Vector3 curPos = AbsolutePosition;
ILandObject curLand = Scene.LandChannel.GetLandObject(curPos.X, curPos.Y);
float posX = targetPosition.X;
float posY = targetPosition.Y;
ILandObject land = Scene.LandChannel.GetLandObject(posX, posY);
if(land is not null && land != curLand)
{
if(!Scene.Permissions.CanObjectEnterWithScripts(this, land))
{
inTransit = false;
return -3;
}
UUID agentID;
foreach (ScenePresence av in m_sittingAvatars)
{
agentID = av.UUID;
if(land.IsRestrictedFromLand(agentID) || land.IsBannedFromLand(agentID))
{
inTransit = false;
return -4;
}
}
}
RootPart.Velocity = vel;
RootPart.AngularVelocity = avel;
RootPart.Acceleration = acc;
RootPart.RotationOffset = ori;
Vector3 s = RootPart.Scale * RootPart.RotationOffset;
float h = Scene.GetGroundHeight(posX, posY) + 0.5f * (float)Math.Abs(s.Z) + 0.01f;
if(targetPosition.Z < h)
targetPosition.Z = h;
inTransit = false;
AbsolutePosition = targetPosition;
RootPart.ScheduleTerseUpdate();
return 1;
}
if(Scene.InTeleportTargetsCoolDown(UUID, sourceID, 20000))
{
inTransit = false;
return -1;
}
TeleportObjectData tdata = new()
{
flags = flags,
vel = vel,
avel = avel,
acc = acc,
ori = ori,
sourceID = sourceID
};
SceneObjectGroup sog = this;
Util.FireAndForget(delegate
{
sog = CrossAsync(sog, targetPosition, tdata);
CrossAsyncCompleted(sog);
}, null, "ObjTeleport-" + sog.UUID.ToString(), false);
return 0;
}
public override Vector3 Velocity
{
get { return RootPart.Velocity; }
set { RootPart.Velocity = value; }
}
public override uint LocalId
{
get { return m_rootPart.LocalId; }
set { m_rootPart.LocalId = value; }
}
public override UUID UUID
{
get { return m_rootPart.UUID; }
set
{
lock (m_parts.SyncRoot)
{
m_parts.Remove(m_rootPart.UUID);
m_rootPart.UUID = value;
m_parts.Add(value, m_rootPart);
}
}
}
public UUID LastOwnerID
{
get { return m_rootPart.LastOwnerID; }
set { m_rootPart.LastOwnerID = value; }
}
public UUID RezzerID
{
get { return m_rootPart.RezzerID; }
set { m_rootPart.RezzerID = value; }
}
public UUID OwnerID
{
get { return m_rootPart.OwnerID; }
set { m_rootPart.OwnerID = value; }
}
public float Damage
{
get { return m_rootPart.Damage; }
set { m_rootPart.Damage = value; }
}
public Color Color
{
get { return m_rootPart.Color; }
set { m_rootPart.Color = value; }
}
public string Text
{
get
{
return m_rootPart.Text.Length > 255 ? m_rootPart.Text[..255] : m_rootPart.Text;
}
set { m_rootPart.Text = value; }
}
///
/// If set to true then the scene object can be backed up in principle, though this will only actually occur
/// if Backup is set. If false then the scene object will never be backed up, Backup will always be false.
///
protected virtual bool CanBeBackedUp
{
get { return true; }
}
public bool IsSelected
{
get { return m_isSelected; }
set
{
m_isSelected = value;
// Tell physics engine that group is selected
// this is not right
// but ode engines should only really need to know about root part
// so they can put entire object simulation on hold and not colliding
// keep as was for now
PhysicsActor pa = m_rootPart.PhysActor;
if (pa is not null)
{
pa.Selected = value;
// Pass it on to the children.
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart child = parts[i];
PhysicsActor childPa = child.PhysActor;
if (childPa is not null)
childPa.Selected = value;
}
}
if (RootPart.KeyframeMotion is not null)
RootPart.KeyframeMotion.Selected = value;
}
}
public void PartSelectChanged(bool partSelect)
{
// any part selected makes group selected
if (m_isSelected == partSelect)
return;
if (partSelect)
{
IsSelected = partSelect;
//if (!IsAttachment)
// ScheduleGroupForFullUpdate();
}
else
{
// bad bad bad 2 heavy for large linksets
// since viewer does send lot of (un)selects
// this needs to be replaced by a specific list or count ?
// but that will require extra code in several places
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part.IsSelected)
return;
}
IsSelected = partSelect;
//if (!IsAttachment)
//{
// ScheduleGroupForFullUpdate();
//}
}
}
private double m_lastCollisionSoundMS;
///
/// The UUID for the region this object is in.
///
public UUID RegionUUID
{
get
{
return m_scene is not null ? m_scene.RegionInfo.RegionID : UUID.Zero;
}
}
///
/// The item ID that this object was rezzed from, if applicable.
///
///
/// If not applicable will be UUID.Zero
///
public UUID FromItemID { get; set; }
///
/// Refers to the SceneObjectPart.UUID property of the object that this object was rezzed from, if applicable.
///
///
/// If not applicable will be UUID.Zero
///
/// obsolete use RezzerID
public UUID FromPartID
{
get { return RezzerID; }
set {RezzerID = value; }
}
///
/// The folder ID that this object was rezzed from, if applicable.
///
///
/// If not applicable will be UUID.Zero
///
public UUID FromFolderID { get; set; }
///
/// If true then grabs are blocked no matter what the individual part BlockGrab setting.
///
/// true if block grab override; otherwise, false.
public bool BlockGrabOverride { get; set; }
///
/// IDs of all avatars sat on this scene object.
///
///
/// We need this so that we can maintain a linkset wide ordering of avatars sat on different parts.
/// This must be locked before it is read or written.
/// SceneObjectPart sitting avatar add/remove code also locks on this object to avoid race conditions.
/// No avatar should appear more than once in this list.
/// Do not manipulate this list directly - use the Add/Remove sitting avatar methods on SceneObjectPart.
///
protected internal List m_sittingAvatars = new();
#endregion
#region Constructors
///
/// Constructor
///
public SceneObjectGroup()
{
m_lastCollisionSoundMS = Util.GetTimeStampMS() + 1000.0;
}
///
/// This constructor creates a SceneObjectGroup using a pre-existing SceneObjectPart.
/// The original SceneObjectPart will be used rather than a copy, preserving
/// its existing localID and UUID.
///
/// Root part for this scene object.
public SceneObjectGroup(SceneObjectPart part) : this()
{
SetRootPart(part);
}
///
/// Constructor. This object is added to the scene later via AttachToScene()
///
public SceneObjectGroup(UUID ownerID, Vector3 pos, Quaternion rot, PrimitiveBaseShape shape)
{
SetRootPart(new SceneObjectPart(ownerID, shape, pos, rot, Vector3.Zero));
}
///
/// Constructor.
///
public SceneObjectGroup(UUID ownerID, Vector3 pos, PrimitiveBaseShape shape)
: this(ownerID, pos, Quaternion.Identity, shape)
{
}
~SceneObjectGroup()
{
Dispose(false);
}
private bool disposed = false;
public void Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
}
protected void Dispose(bool disposing)
{
// Check to see if Dispose has already been called.
if (!disposed)
{
IsDeleted = true;
disposed = true;
SceneObjectPart[] parts = m_parts.GetArray();
for(int i= 0; i < parts.Length; ++i)
parts[i].Dispose();
}
}
public void LoadScriptState(XmlDocument doc)
{
XmlNodeList nodes = doc.GetElementsByTagName("SavedScriptState");
if (nodes.Count > 0)
{
m_savedScriptState ??= new Dictionary();
foreach (XmlNode node in nodes)
{
if (node.Attributes["UUID"] is not null)
{
UUID itemid = new(node.Attributes["UUID"].Value);
if (itemid.IsNotZero())
m_savedScriptState[itemid] = node.InnerXml;
}
}
}
}
public void LoadScriptState(XmlReader reader)
{
//m_log.DebugFormat("[SCENE OBJECT GROUP]: Looking for script state for {0}", Name);
while (true)
{
if (reader.Name.Equals("SavedScriptState") && reader.NodeType == XmlNodeType.Element)
{
//m_log.DebugFormat("[SCENE OBJECT GROUP]: Loading script state for {0}", Name);
m_savedScriptState ??= new Dictionary();
string uuid = reader.GetAttribute("UUID");
// Even if there is no UUID attribute for some strange reason, we must always read the inner XML
// so we don't continually keep checking the same SavedScriptedState element.
string innerXml = reader.ReadInnerXml();
if (!string.IsNullOrEmpty(uuid))
{
//m_log.DebugFormat("[SCENE OBJECT GROUP]: Found state for item ID {0} in object {1}", uuid, Name);
if (UUID.TryParse(uuid, out UUID itemid) && itemid.IsNotZero())
m_savedScriptState[itemid] = innerXml;
}
else
{
m_log.Warn($"[SCENE OBJECT GROUP]: SavedScriptState element had no UUID in object {Name} id: {UUID}");
}
}
else
{
if (!reader.Read())
break;
}
}
}
///
/// Hooks this object up to the backup event so that it is persisted to the database when the update thread executes.
///
public virtual void AttachToBackup()
{
if (IsAttachment)
return;
if (!Backup)
{
m_scene.SceneGraph.FireAttachToBackup(this);
m_scene.EventManager.OnBackup += ProcessBackup;
}
Backup = true;
}
///
/// Attach this object to a scene. It will also now appear to agents.
///
///
public void AttachToScene(Scene scene)
{
m_scene = scene;
RegionHandle = m_scene.RegionInfo.RegionHandle;
if (m_rootPart.Shape.PCode != 9 || m_rootPart.Shape.State == 0)
m_rootPart.ParentID = 0;
if (m_rootPart.LocalId == 0)
m_rootPart.LocalId = m_scene.AllocateLocalId();
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
part.KeyframeMotion?.UpdateSceneObject(this);
if (Object.ReferenceEquals(part, m_rootPart))
continue;
if (part.LocalId == 0)
part.LocalId = m_scene.AllocateLocalId();
part.ParentID = m_rootPart.LocalId;
//m_log.DebugFormat("[SCENE]: Given local id {0} to part {1}, linknum {2}, parent {3} {4}", part.LocalId, part.UUID, part.LinkNum, part.ParentID, part.ParentUUID);
}
ApplyPhysics();
// Don't trigger the update here - otherwise some client issues occur when multiple updates are scheduled
// for the same object with very different properties. The caller must schedule the update.
//ScheduleGroupForFullUpdate();
}
public EntityIntersection TestIntersection(Ray hRay, bool frontFacesOnly, bool faceCenters)
{
// We got a request from the inner_scene to raytrace along the Ray hRay
// We're going to check all of the prim in this group for intersection with the ray
// If we get a result, we're going to find the closest result to the origin of the ray
// and send back the intersection information back to the innerscene.
EntityIntersection result = new();
SceneObjectPart[] parts = m_parts.GetArray();
// Find closest hit here
float idist = float.MaxValue;
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
// Temporary commented to stop compiler warning
//Vector3 partPosition =
// new Vector3(part.AbsolutePosition.X, part.AbsolutePosition.Y, part.AbsolutePosition.Z);
Quaternion parentrotation = GroupRotation;
// Telling the prim to raytrace.
//EntityIntersection inter = part.TestIntersection(hRay, parentrotation);
EntityIntersection inter = part.TestIntersectionOBB(hRay, parentrotation, frontFacesOnly, faceCenters);
if (inter.HitTF)
{
// We need to find the closest prim to return to the testcaller along the ray
if (inter.distance < idist)
{
result.HitTF = true;
result.ipoint = inter.ipoint;
result.obj = part;
result.normal = inter.normal;
result.distance = inter.distance;
idist = inter.distance;
}
}
}
return result;
}
public void GetBoundingBox(out float minX, out float maxX, out float minY, out float maxY, out float minZ, out float maxZ)
{
uint rootid = RootPart.LocalId;
Vector3 scale = RootPart.Scale * 0.5f;
minX = -scale.X;
maxX = scale.X;
minY = -scale.Y;
maxY = scale.Y;
minZ = -scale.Z;
maxZ = scale.Z;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; ++i)
{
SceneObjectPart part = parts[i];
if(part.LocalId == rootid)
continue;
Vector3 offset = part.OffsetPosition;
scale = part.Scale * 0.5f;
Matrix4 m = Matrix4.CreateFromQuaternion(part.RotationOffset);
Vector3 a = m.AtAxis;
a.X = Math.Abs(a.X);
a.Y = Math.Abs(a.Y);
a.Z = Math.Abs(a.Z);
float tmpS = Vector3.Dot(a, scale);
float tmp = offset.X - tmpS;
if (tmp < minX)
minX = tmp;
tmp = offset.X + tmpS;
if (tmp > maxX)
maxX = tmp;
a = m.LeftAxis;
a.X = Math.Abs(a.X);
a.Y = Math.Abs(a.Y);
a.Z = Math.Abs(a.Z);
tmpS = Vector3.Dot(a, scale);
tmp = offset.Y - tmpS;
if (tmp < minY)
minY = tmp;
tmp = offset.Y + tmpS;
if (tmp > maxY)
maxY = tmp;
a = m.UpAxis;
a.X = Math.Abs(a.X);
a.Y = Math.Abs(a.Y);
a.Z = Math.Abs(a.Z);
tmpS = Vector3.Dot(a, scale);
tmp = offset.Z - tmpS;
if (tmp < minZ)
minZ = tmp;
tmp = offset.Z + tmpS;
if (tmp > maxZ)
maxZ = tmp;
}
}
///
/// Gets a vector representing the size of the bounding box containing all the prims in the group
/// Treats all prims as rectangular, so no shape (cut etc) is taken into account
///
///
public void GetAxisAlignedBoundingBoxRaw(out float minX, out float maxX, out float minY, out float maxY, out float minZ, out float maxZ)
{
maxX = float.MinValue;
maxY = float.MinValue;
maxZ = float.MinValue;
minX = float.MaxValue;
minY = float.MaxValue;
minZ = float.MaxValue;
Vector3 absPos = AbsolutePosition;
SceneObjectPart[] parts = m_parts.GetArray();
for(int i = 0; i< parts.Length; ++i)
{
SceneObjectPart part = parts[i];
Vector3 offset = part.GetWorldPosition() - absPos;
Vector3 scale = part.Scale * 0.5f;
Matrix4 m = Matrix4.CreateFromQuaternion(part.GetWorldRotation());
Vector3 a = m.AtAxis;
a.X = MathF.Abs(a.X);
a.Y = MathF.Abs(a.Y);
a.Z = MathF.Abs(a.Z);
float tmpS = Vector3.Dot(a, scale);
float tmp = offset.X - tmpS;
if (tmp < minX)
minX = tmp;
tmp = offset.X + tmpS;
if (tmp > maxX)
maxX = tmp;
a = m.LeftAxis;
a.X = MathF.Abs(a.X);
a.Y = MathF.Abs(a.Y);
a.Z = MathF.Abs(a.Z);
tmpS = Vector3.Dot(a, scale);
tmp = offset.Y - tmpS;
if (tmp < minY)
minY = tmp;
tmp = offset.Y + tmpS;
if (tmp > maxY)
maxY = tmp;
a = m.UpAxis;
a.X = MathF.Abs(a.X);
a.Y = MathF.Abs(a.Y);
a.Z = MathF.Abs(a.Z);
tmpS = Vector3.Dot(a, scale);
tmp = offset.Z - tmpS;
if (tmp < minZ)
minZ = tmp;
tmp = offset.Z + tmpS;
if (tmp > maxZ)
maxZ = tmp;
}
}
///
/// Gets a vector representing the size of the bounding box containing all the prims in the group
/// Treats all prims as rectangular, so no shape (cut etc) is taken into account
/// offsetHeight is the offset in the Z axis from the centre of the bounding box to the centre of the root prim
///
///
public Vector3 GetAxisAlignedBoundingBox(out float offsetHeight)
{
GetAxisAlignedBoundingBoxRaw(out float minX, out float maxX, out float minY, out float maxY, out float minZ, out float maxZ);
Vector3 boundingBox = new(maxX - minX, maxY - minY, maxZ - minZ);
offsetHeight = 0;
float lower = -minZ;
if (lower > maxZ)
offsetHeight = lower - 0.5f * boundingBox.Z;
else if (maxZ > lower)
offsetHeight = 0.5f * boundingBox.Z - maxZ;
// m_log.InfoFormat("BoundingBox is {0} , {1} , {2} ", boundingBox.X, boundingBox.Y, boundingBox.Z);
return boundingBox;
}
#endregion
private float? m_boundsRadius = null;
public void InvalidBoundsRadius()
{
m_boundsRadius = null;
}
private Vector3 m_boundsCenter;
private Vector3 m_LastCenterOffset;
private Vector3 last_boundsRot = new(-10, -10, -10);
public Vector3 getCenterOffset()
{
// math is done in GetBoundsRadius();
if(m_boundsRadius is null)
GetBoundsRadius();
Quaternion rot = m_rootPart.RotationOffset;
if (last_boundsRot.X != rot.X ||
last_boundsRot.Y != rot.Y ||
last_boundsRot.Z != rot.Z)
{
m_LastCenterOffset = m_boundsCenter * rot;
last_boundsRot.X = rot.X;
last_boundsRot.Y = rot.Y;
last_boundsRot.Z = rot.Z;
}
return m_rootPart.GroupPosition + m_LastCenterOffset;
}
private float m_areaFactor;
public float getAreaFactor()
{
// math is done in GetBoundsRadius();
if(m_boundsRadius is null)
GetBoundsRadius();
return m_areaFactor;
}
public float GetBoundsRadius()
{
// this may need more threading work
if(m_boundsRadius is null)
{
float res = 0;
float areaF = 0;
float partR;
Vector3 offset = Vector3.Zero;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart p = parts[i];
partR = 0.5f * p.Scale.Length();
if(p != RootPart)
{
partR += p.OffsetPosition.Length();
offset += p.OffsetPosition;
}
if(partR > res)
res = partR;
if(p.maxSimpleArea() > areaF)
areaF = p.maxSimpleArea();
}
if(parts.Length > 1)
{
offset /= parts.Length; // basicly geometric center
}
areaF = 0.5f / areaF; // scale it
areaF = Utils.Clamp(areaF, 0.05f, 100f); // clamp it
m_areaFactor = MathF.Sqrt(areaF);
m_boundsCenter = offset;
m_boundsRadius = res;
return res;
}
return m_boundsRadius.Value;
}
public void GetResourcesCosts(SceneObjectPart apart,
out float linksetResCost, out float linksetPhysCost, out float partCost, out float partPhysCost)
{
// this information may need to be cached
float cost;
float tmpcost;
bool ComplexCost = false;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
if (parts[i].UsesComplexCost)
{
ComplexCost = true;
break;
}
}
if (ComplexCost)
{
linksetResCost = 0;
linksetPhysCost = 0;
partCost = 0;
partPhysCost = 0;
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart p = parts[i];
cost = p.StreamingCost;
tmpcost = p.SimulationCost;
if (tmpcost > cost)
cost = tmpcost;
tmpcost = p.PhysicsCost;
if (tmpcost > cost)
cost = tmpcost;
linksetPhysCost += tmpcost;
linksetResCost += cost;
if (p == apart)
{
partCost = cost;
partPhysCost = tmpcost;
}
}
}
else
{
partPhysCost = 1.0f;
partCost = 1.0f;
linksetResCost = parts.Length;
linksetPhysCost = linksetResCost;
}
}
public void GetSelectedCosts(out float PhysCost, out float StreamCost, out float SimulCost)
{
SceneObjectPart p;
SceneObjectPart[] parts = m_parts.GetArray();
PhysCost = 0;
StreamCost = 0;
SimulCost = 0;
for (int i = 0; i < parts.Length; i++)
{
p = parts[i];
StreamCost += p.StreamingCost;
SimulCost += p.SimulationCost;
PhysCost += p.PhysicsCost;
}
}
public void SaveScriptedState(XmlTextWriter writer)
{
SaveScriptedState(writer, false);
}
public void SaveScriptedState(XmlTextWriter writer, bool oldIDs)
{
XmlDocument doc = new();
Dictionary states = new();
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
Dictionary pstates = parts[i].Inventory.GetScriptStates(oldIDs);
foreach (KeyValuePair kvp in pstates)
states[kvp.Key] = kvp.Value;
}
if (states.Count > 0)
{
// Now generate the necessary XML wrappings
writer.WriteStartElement(String.Empty, "GroupScriptStates", String.Empty);
foreach (UUID itemid in states.Keys)
{
doc.LoadXml(states[itemid]);
writer.WriteStartElement(String.Empty, "SavedScriptState", String.Empty);
writer.WriteAttributeString(String.Empty, "UUID", String.Empty, itemid.ToString());
writer.WriteRaw(doc.DocumentElement.OuterXml); // Writes ScriptState element
writer.WriteEndElement(); // End of SavedScriptState
}
writer.WriteEndElement(); // End of GroupScriptStates
}
}
public byte GetAttachmentPoint()
{
return m_rootPart.Shape.State;
}
public void DetachToGround()
{
ScenePresence avatar = m_scene.GetScenePresence(AttachedAvatar);
if (avatar is null)
return;
m_rootPart.Shape.LastAttachPoint = m_rootPart.Shape.State;
m_rootPart.AttachedPos = m_rootPart.OffsetPosition;
avatar.RemoveAttachment(this);
if (avatar is null)
return;
Vector3 detachedpos = avatar.AbsolutePosition;
FromItemID = UUID.Zero;
AbsolutePosition = detachedpos;
AttachedAvatar = UUID.Zero;
//SceneObjectPart[] parts = m_parts.GetArray();
//for (int i = 0; i < parts.Length; i++)
// parts[i].AttachedAvatar = UUID.Zero;
m_rootPart.SetParentLocalId(0);
AttachmentPoint = 0;
// must check if buildind should be true or false here
//m_rootPart.ApplyPhysics(m_rootPart.GetEffectiveObjectFlags(), m_rootPart.VolumeDetectActive,false);
ApplyPhysics();
HasGroupChanged = true;
RootPart.Rezzed = DateTime.Now;
RootPart.RemFlag(PrimFlags.TemporaryOnRez);
AttachToBackup();
m_scene.EventManager.TriggerParcelPrimCountTainted();
m_rootPart.ScheduleFullUpdate();
m_rootPart.ClearUndoState();
}
public void DetachToInventoryPrep()
{
ScenePresence avatar = m_scene.GetScenePresence(AttachedAvatar);
//Vector3 detachedpos = new Vector3(127f, 127f, 127f);
//detachedpos = avatar.AbsolutePosition;
avatar?.RemoveAttachment(this);
AttachedAvatar = UUID.Zero;
/*SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
parts[i].AttachedAvatar = UUID.Zero;*/
m_rootPart.SetParentLocalId(0);
//m_rootPart.SetAttachmentPoint((byte)0);
IsAttachment = false;
AbsolutePosition = m_rootPart.AttachedPos;
//m_rootPart.ApplyPhysics(m_rootPart.GetEffectiveObjectFlags(), m_scene.m_physicalPrim);
//AttachToBackup();
//m_rootPart.ScheduleFullUpdate();
}
///
///
///
///
private void SetPartAsNonRoot(SceneObjectPart part)
{
part.ParentID = m_rootPart.LocalId;
part.ClearUndoState();
}
///
/// Set a part to act as the root part for this scene object
///
///
public void SetRootPart(SceneObjectPart part)
{
if (part is null)
throw new ArgumentNullException("Cannot give SceneObjectGroup a null root SceneObjectPart");
part.SetParent(this);
m_rootPart = part;
if (!IsAttachment)
part.ParentID = 0;
part.LinkNum = 0;
m_parts.Add(m_rootPart.UUID, m_rootPart);
}
///
/// Add a new part to this scene object. The part must already be correctly configured.
///
///
public void AddPart(SceneObjectPart part)
{
part.SetParent(this);
m_parts.Add(part.UUID, part);
part.LinkNum = m_parts.Count;
if (part.LinkNum == 2)
RootPart.LinkNum = 1;
InvalidatePartsLinkMaps();
}
///
/// Make sure that every non root part has the proper parent root part local id
///
private void UpdateParentIDs()
{
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part.UUID.NotEqual(m_rootPart.UUID))
part.ParentID = m_rootPart.LocalId;
}
}
public void RegenerateFullIDs()
{
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
parts[i].UUID = UUID.Random();
}
// helper provided for parts.
public int GetSceneMaxUndo()
{
if (m_scene is not null)
return m_scene.MaxUndoCount;
return 5;
}
public void ResetChildPrimPhysicsPositions()
{
// Setting this SOG's absolute position also loops through and sets the positions
// of the SOP's in this SOG's linkset. This has the side affect of making sure
// the physics world matches the simulated world.
Vector3 groupPosition = m_rootPart.GroupPosition;
SceneObjectPart[] parts = m_parts.GetArray();
foreach (SceneObjectPart part in parts)
{
if (part != m_rootPart)
part.GroupPosition = groupPosition;
}
}
public UUID GetPartsFullID(uint localID)
{
SceneObjectPart part = GetPart(localID);
return part is not null ? part.UUID : UUID.Zero;
}
public void ObjectGrabHandler(uint localId, Vector3 offsetPos, IClientAPI remoteClient)
{
if (m_rootPart.LocalId == localId)
{
if((RootPart.ScriptEvents & scriptEvents.anytouch) != 0)
lastTouchTime = Util.GetTimeStampMS();
OnGrabGroup(offsetPos, remoteClient);
}
else
{
SceneObjectPart part = GetPart(localId);
if (((part.ScriptEvents & scriptEvents.anytouch) != 0) || (RootPart.ScriptEvents & scriptEvents.anytouch) != 0)
lastTouchTime = Util.GetTimeStampMS();
OnGrabPart(part, offsetPos, remoteClient);
}
}
public virtual void OnGrabPart(SceneObjectPart part, Vector3 offsetPos, IClientAPI remoteClient)
{
//m_log.DebugFormat(
// "[SCENE OBJECT GROUP]: Processing OnGrabPart for {0} on {1} {2}, offsetPos {3}",
// remoteClient.Name, part.Name, part.LocalId, offsetPos);
//part.StoreUndoState();
part.OnGrab(offsetPos, remoteClient);
}
public virtual void OnGrabGroup(Vector3 offsetPos, IClientAPI remoteClient)
{
m_scene.EventManager.TriggerGroupGrab(UUID, offsetPos, remoteClient.AgentId);
}
///
/// Delete this group from its scene.
///
///
/// This only handles the in-world consequences of deletion (e.g. any avatars sitting on it are forcibly stood
/// up and all avatars receive notification of its removal. Removal of the scene object from database backup
/// must be handled by the caller.
///
/// If true then deletion is not broadcast to clients
public void DeleteGroupFromScene(bool silent)
{
// We need to keep track of this state in case this group is still queued for backup.
IsDeleted = true;
DetachFromBackup();
if(Scene is null) // should not happen unless restart/shutdown ?
return;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
Scene.ForEachScenePresence(delegate(ScenePresence avatar)
{
if (!avatar.IsChildAgent && avatar.ParentID == part.LocalId && avatar.ParentUUID.IsZero())
avatar.StandUp();
if (!silent)
{
part.ClearUpdateSchedule();
if (part == m_rootPart)
{
if (!IsAttachment
|| AttachedAvatar == avatar.ControllingClient.AgentId
|| !HasPrivateAttachmentPoint)
{
// Send a kill object immediately
avatar.ControllingClient.SendKillObject(new List { part.LocalId });
//direct enqueue another delayed kill
avatar.ControllingClient.SendEntityUpdate(part,PrimUpdateFlags.Kill);
}
}
}
});
}
}
public void AddScriptLPS(int count)
{
//legacy
//m_scene.SceneGraph.AddToScriptLPS(count);
}
public void AddActiveScriptCount(int count)
{
SceneGraph d = m_scene.SceneGraph;
d.AddActiveScripts(count);
}
private const scriptEvents PhysicsNeeedSubsEvents = (
scriptEvents.collision | scriptEvents.collision_start | scriptEvents.collision_end |
scriptEvents.land_collision | scriptEvents.land_collision_start | scriptEvents.land_collision_end);
private scriptEvents lastRootPartPhysEvents = 0;
public scriptEvents ScriptEvents;
public void aggregateScriptEvents()
{
PrimFlags objectflagupdate = (PrimFlags)RootPart.GetEffectiveObjectFlags();
scriptEvents aggregatedScriptEvents = 0;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part != RootPart)
part.Flags = objectflagupdate;
aggregatedScriptEvents |= part.AggregatedScriptEvents;
}
m_scriptListens_atTarget = ((aggregatedScriptEvents & scriptEvents.at_target) != 0);
m_scriptListens_notAtTarget = ((aggregatedScriptEvents & scriptEvents.not_at_target) != 0);
if (!m_scriptListens_atTarget && !m_scriptListens_notAtTarget)
{
lock (m_targets)
{
if (m_targets.Count > 0)
{
m_targets.Clear();
m_scene.RemoveGroupTarget(this);
}
}
}
m_scriptListens_atRotTarget = ((aggregatedScriptEvents & scriptEvents.at_rot_target) != 0);
m_scriptListens_notAtRotTarget = ((aggregatedScriptEvents & scriptEvents.not_at_rot_target) != 0);
if (!m_scriptListens_atRotTarget && !m_scriptListens_notAtRotTarget)
{
lock (m_rotTargets)
{
if (m_rotTargets.Count > 0)
{
m_rotTargets.Clear();
m_scene.RemoveGroupTarget(this);
}
}
}
scriptEvents rootPartPhysEvents = RootPart.AggregatedScriptEvents;
rootPartPhysEvents &= PhysicsNeeedSubsEvents;
if (rootPartPhysEvents != lastRootPartPhysEvents)
{
lastRootPartPhysEvents = rootPartPhysEvents;
for (int i = 0; i < parts.Length; i++)
parts[i].UpdatePhysicsSubscribedEvents();
}
ScriptEvents = aggregatedScriptEvents;
ScheduleGroupForFullUpdate();
}
public void SetText(string text, Vector3 color, double alpha)
{
Color = Color.FromArgb(0xff - (int) (alpha * 0xff),
(int) (color.X * 0xff),
(int) (color.Y * 0xff),
(int) (color.Z * 0xff));
Text = text;
HasGroupChanged = true;
m_rootPart.ScheduleFullUpdate();
}
///
/// Apply physics to this group
///
public void ApplyPhysics()
{
SceneObjectPart[] parts = m_parts.GetArray();
if (parts.Length > 1)
{
ResetChildPrimPhysicsPositions();
// Apply physics to the root prim
m_rootPart.ApplyPhysics(m_rootPart.GetEffectiveObjectFlags(), m_rootPart.VolumeDetectActive, true);
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part.LocalId != m_rootPart.LocalId)
part.ApplyPhysics(m_rootPart.GetEffectiveObjectFlags(), part.VolumeDetectActive, true);
}
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = false;
}
else
{
// Apply physics to the root prim
m_rootPart.ApplyPhysics(m_rootPart.GetEffectiveObjectFlags(), m_rootPart.VolumeDetectActive, false);
}
}
public void SetOwnerId(UUID userId)
{
ForEachPart(delegate(SceneObjectPart part)
{
if (part.OwnerID.NotEqual(userId))
{
if(part.GroupID.NotEqual(part.OwnerID))
part.LastOwnerID = part.OwnerID;
part.OwnerID = userId;
}
});
}
public void ForEachPart(Action whatToDo)
{
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
whatToDo(parts[i]);
}
#region Events
///
/// Processes backup.
///
///
public virtual void ProcessBackup(ISimulationDataService datastore, bool forcedBackup)
{
if (!Backup)
{
//m_log.DebugFormat(
// "[WATER WARS]: Ignoring backup of {0} {1} since object is not marked to be backed up", Name, UUID);
return;
}
if (IsDeleted || inTransit || UUID.IsZero())
{
//m_log.DebugFormat(
// "[WATER WARS]: Ignoring backup of {0} {1} since object is marked as already deleted", Name, UUID);
return;
}
if ((RootPart.Flags & PrimFlags.TemporaryOnRez) != 0)
return;
// Since this is the top of the section of call stack for backing up a particular scene object, don't let
// any exception propogate upwards.
try
{
// if shutting down then there will be nothing to handle the return so leave till next restart
if (!m_scene.ShuttingDown &&
m_scene.LoginsEnabled && // We're starting up or doing maintenance, don't mess with things
!m_scene.LoadingPrims) // Land may not be valid yet
{
ILandObject parcel = m_scene.LandChannel.GetLandObject(
m_rootPart.GroupPosition.X, m_rootPart.GroupPosition.Y);
if (parcel is not null && parcel.LandData is not null &&
parcel.LandData.OtherCleanTime != 0)
{
if (parcel.LandData.OwnerID.NotEqual(OwnerID) &&
(parcel.LandData.GroupID.NotEqual(GroupID) ||
parcel.LandData.GroupID.IsZero()))
{
if ((DateTime.UtcNow - RootPart.Rezzed).TotalMinutes >
parcel.LandData.OtherCleanTime)
{
// don't autoreturn if we have a sitting avatar
// mantis 7828 (but none the provided patchs)
if(GetSittingAvatarsCount() > 0)
{
// do not respect npcs
List sitters = GetSittingAvatars();
foreach(ScenePresence sp in sitters)
{
if(!sp.IsDeleted && !sp.IsNPC && sp.IsSatOnObject)
return;
}
}
DetachFromBackup();
m_log.Debug(
$"[SCENE OBJECT GROUP]: Returning object {RootPart.UUID} due to parcel autoreturn");
m_scene.AddReturn(OwnerID.Equals(GroupID) ? LastOwnerID : OwnerID, Name, AbsolutePosition, "parcel autoreturn");
m_scene.DeRezObjects(null, new List() { RootPart.LocalId }, UUID.Zero,
DeRezAction.Return, UUID.Zero, false);
return;
}
}
}
}
if (HasGroupChanged && m_scene.UseBackup)
{
// don't backup while it's selected or you're asking for changes mid stream.
if (isTimeToPersist() || forcedBackup)
{
if (RootPart.Shape.PCode == 9 && RootPart.Shape.State != 0)
{
RootPart.Shape.LastAttachPoint = RootPart.Shape.State;
RootPart.Shape.State = 0;
ScheduleGroupForFullUpdate();
}
SceneObjectGroup backup_group = Copy(false);
backup_group.RootPart.Velocity = RootPart.Velocity;
backup_group.RootPart.Acceleration = RootPart.Acceleration;
backup_group.RootPart.AngularVelocity = RootPart.AngularVelocity;
HasGroupChanged = false;
GroupContainsForeignPrims = false;
m_scene.EventManager.TriggerOnSceneObjectPreSave(backup_group, this);
datastore.StoreObject(backup_group, m_scene.RegionInfo.RegionID);
backup_group.ForEachPart(delegate(SceneObjectPart part)
{
part.Inventory.ProcessInventoryBackup(datastore);
if(part.KeyframeMotion is not null)
{
part.KeyframeMotion.Delete();
part.KeyframeMotion = null;
}
});
backup_group.Dispose();
backup_group = null;
}
}
}
catch (Exception e)
{
m_log.Error($"[SCENE]: Storing of {Name}, {UUID} in {m_scene.RegionInfo.RegionName} failed: {e.Message}");
}
}
#endregion
///
/// Send the parts of this SOG to a single client
///
///
/// Used when the client initially connects and when client sends RequestPrim packet
///
///
public void SendFullAnimUpdateToClient(IClientAPI remoteClient)
{
PrimUpdateFlags update = RootPart.Shape.MeshFlagEntry ?
PrimUpdateFlags.FullUpdatewithAnim :
PrimUpdateFlags.FullUpdate;
if (RootPart.Shape.RenderMaterials is not null &&
RootPart.Shape.ReflectionProbe is null &&
RootPart.Shape.RenderMaterials.overrides is not null &&
RootPart.Shape.RenderMaterials.overrides.Length > 0)
RootPart.SendUpdate(remoteClient, update | PrimUpdateFlags.MaterialOvr);
else
RootPart.SendUpdate(remoteClient, update);
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part.LocalId != RootPart.LocalId)
{
if (part.Shape.RenderMaterials is not null &&
part.Shape.ReflectionProbe is null &&
part.Shape.RenderMaterials.overrides is not null &&
part.Shape.RenderMaterials.overrides.Length > 0)
part.SendUpdate(remoteClient, update | PrimUpdateFlags.MaterialOvr);
else
part.SendUpdate(remoteClient, update);
}
}
}
public void SendUpdateProbes(IClientAPI remoteClient)
{
PrimUpdateFlags update = PrimUpdateFlags.UpdateProbe;
RootPart.SendUpdate(remoteClient, update);
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part.LocalId != RootPart.LocalId)
part.SendUpdate(remoteClient, update);
}
}
#region Copying
///
/// Duplicates this object, including operations such as physics set up and attaching to the backup event.
///
/// True if the duplicate will immediately be in the scene, false otherwise
///
public SceneObjectGroup Copy(bool userExposed)
{
m_dupeInProgress = true;
SceneObjectGroup dupe = (SceneObjectGroup)MemberwiseClone();
dupe.m_parts = new MapAndArray();
dupe.m_targets = new Dictionary();
dupe.m_rotTargets = new Dictionary();
dupe.m_targetsByScript = new Dictionary>();
// a copy isnt backedup
dupe.Backup = false;
dupe.InvalidBoundsRadius();
// a copy is not in transit hopefully
dupe.inTransit = false;
// new group as no sitting avatars
dupe.m_sittingAvatars = new List();
if(LinksetData is not null)
dupe.LinksetData = LinksetData.Copy();
dupe.CopyRootPart(m_rootPart, OwnerID, GroupID, userExposed);
dupe.m_rootPart.LinkNum = m_rootPart.LinkNum;
if (userExposed)
dupe.m_rootPart.TrimPermissions();
List partList = new(m_parts.GetArray());
partList.Sort(delegate(SceneObjectPart p1, SceneObjectPart p2)
{
return p1.LinkNum.CompareTo(p2.LinkNum);
}
);
foreach (SceneObjectPart part in partList)
{
SceneObjectPart newPart;
if (part.UUID.NotEqual(m_rootPart.UUID))
{
newPart = dupe.CopyPart(part, OwnerID, GroupID, userExposed);
newPart.LinkNum = part.LinkNum;
//if (userExposed)
newPart.ParentID = dupe.m_rootPart.LocalId;
}
else
{
newPart = dupe.m_rootPart;
}
if (userExposed)
newPart.ApplyPhysics((uint)newPart.Flags,newPart.VolumeDetectActive,true);
// copy keyframemotion
if (part.KeyframeMotion is not null)
newPart.KeyframeMotion = part.KeyframeMotion.Copy(dupe);
}
if (userExposed)
{
if (dupe.m_rootPart.PhysActor is not null)
dupe.m_rootPart.PhysActor.Building = false; // tell physics to finish building
dupe.InvalidateDeepEffectivePerms();
dupe.HasGroupChanged = true;
dupe.AttachToBackup();
dupe.ScheduleGroupForUpdate(PrimUpdateFlags.FullUpdatewithAnimMatOvr);
}
dupe.InvalidatePartsLinkMaps();
m_dupeInProgress = false;
return dupe;
}
///
/// Copy the given part as the root part of this scene object.
///
///
///
///
public void CopyRootPart(SceneObjectPart part, UUID cAgentID, UUID cGroupID, bool userExposed)
{
SceneObjectPart newpart = part.Copy(m_scene.AllocateLocalId(), OwnerID, GroupID, 0, userExposed);
//SceneObjectPart newpart = part.Copy(part.LocalId, OwnerID, GroupID, 0, userExposed);
//newpart.LocalId = m_scene.AllocateLocalId();
SetRootPart(newpart);
if (userExposed)
RootPart.Velocity = Vector3.Zero; // In case source is moving
}
public void ScriptSetPhysicsStatus(bool usePhysics)
{
if (usePhysics)
{
RootPart.KeyframeMotion?.Stop();
RootPart.KeyframeMotion = null;
}
UpdateFlags(usePhysics, IsTemporary, IsPhantom, IsVolumeDetect);
}
public void ScriptSetTemporaryStatus(bool makeTemporary)
{
UpdateFlags(UsesPhysics, makeTemporary, IsPhantom, IsVolumeDetect);
}
public void ScriptSetPhantomStatus(bool makePhantom)
{
UpdateFlags(UsesPhysics, IsTemporary, makePhantom, IsVolumeDetect);
}
public void ScriptSetVolumeDetect(bool makeVolumeDetect)
{
UpdateFlags(UsesPhysics, IsTemporary, IsPhantom, makeVolumeDetect);
}
public void applyImpulse(Vector3 impulse)
{
if (IsAttachment)
{
ScenePresence avatar = m_scene.GetScenePresence(AttachedAvatar);
avatar?.PushForce(impulse);
}
else
{
PhysicsActor pa = RootPart.PhysActor;
if (pa is not null)
{
// false to be applied as a impulse
pa.AddForce(impulse, false);
}
}
}
public void ApplyAngularImpulse(Vector3 impulse)
{
PhysicsActor pa = RootPart.PhysActor;
if (pa is not null)
{
if (!IsAttachment)
{
// false to be applied as a impulse
pa.AddAngularForce(impulse, false);
}
}
}
public Vector3 GetTorque()
{
return RootPart.Torque;
}
// This is used by both Double-Click Auto-Pilot and llMoveToTarget() in an attached object
public void MoveToTarget(Vector3 target, float tau)
{
if(tau > 0)
{
if (IsAttachment)
{
ScenePresence avatar = m_scene.GetScenePresence(AttachedAvatar);
if (avatar is not null && !avatar.IsSatOnObject)
avatar.MoveToTarget(target, false, true, false, tau);
}
else
{
PhysicsActor pa = RootPart.PhysActor;
if (pa is not null)
{
pa.PIDTarget = target;
pa.PIDTau = tau;
pa.PIDActive = true;
}
}
}
else
StopMoveToTarget();
}
public void StopMoveToTarget()
{
if (IsAttachment)
{
ScenePresence avatar = m_scene.GetScenePresence(AttachedAvatar);
avatar?.ResetMoveToTarget();
}
else
{
PhysicsActor pa = RootPart.PhysActor;
if (pa is not null)
pa.PIDActive = false;
RootPart.ScheduleTerseUpdate(); // send a stop information
}
}
public void RotLookAt(Quaternion target, float strength, float damping)
{
if(IsDeleted)
return;
// non physical is handle in LSL api
if(!UsesPhysics || IsAttachment)
return;
SceneObjectPart rootpart = m_rootPart;
if (rootpart is not null)
{
/* physics still doesnt suport this
if (rootpart.PhysActor is not null)
{
rootpart.PhysActor.APIDTarget = new Quaternion(target.X, target.Y, target.Z, target.W);
rootpart.PhysActor.APIDStrength = strength;
rootpart.PhysActor.APIDDamping = damping;
rootpart.PhysActor.APIDActive = true;
}
*/
// so do it in rootpart
rootpart.RotLookAt(target, strength, damping);
}
}
public void StartLookAt(Quaternion target, float strength, float damping)
{
if(IsDeleted)
return;
// non physical is done by LSL APi
if(!UsesPhysics || IsAttachment)
return;
m_rootPart?.RotLookAt(target, strength, damping);
}
public void StopLookAt()
{
SceneObjectPart rootpart = m_rootPart;
if (rootpart is not null)
{
if (rootpart.PhysActor is not null)
{
rootpart.PhysActor.APIDActive = false;
}
rootpart.StopLookAt();
}
}
///
/// Uses a PID to attempt to clamp the object on the Z axis at the given height over tau seconds.
///
/// Height to hover. Height of zero disables hover.
/// Determines what the height is relative to
/// Number of seconds over which to reach target
public void SetHoverHeight(float height, PIDHoverType hoverType, float tau)
{
PhysicsActor pa = null;
if(IsAttachment)
{
ScenePresence avatar = m_scene.GetScenePresence(AttachedAvatar);
if (avatar is not null)
pa = avatar.PhysicsActor;
}
else
pa = RootPart.PhysActor;
if (pa is not null)
{
if (height != 0f)
{
pa.PIDHoverHeight = height;
pa.PIDHoverType = hoverType;
pa.PIDHoverTau = tau;
pa.PIDHoverActive = true;
}
else
{
pa.PIDHoverActive = false;
}
}
}
///
/// Set the owner of all linkset.
///
///
///
public void SetOwner(UUID cAgentID, UUID cGroupID)
{
SceneObjectPart rpart = RootPart;
UUID oldowner = rpart.OwnerID;
ForEachPart(delegate(SceneObjectPart part)
{
if(part.GroupID.NotEqual(part.OwnerID))
part.LastOwnerID = part.OwnerID;
part.OwnerID = cAgentID;
part.GroupID = cGroupID;
});
if (oldowner.NotEqual(cAgentID))
{
// Apply Next Owner Permissions if we're not bypassing permissions
if (!m_scene.Permissions.BypassPermissions())
{
ApplyNextOwnerPermissions();
InvalidateEffectivePerms();
}
}
rpart.ScheduleFullUpdate();
}
///
/// Make a copy of the given part.
///
///
///
///
public SceneObjectPart CopyPart(SceneObjectPart part, UUID cAgentID, UUID cGroupID, bool userExposed)
{
SceneObjectPart newPart = part.Copy(m_scene.AllocateLocalId(), OwnerID, GroupID, m_parts.Count, userExposed);
//SceneObjectPart newPart = part.Copy(part.LocalId, OwnerID, GroupID, m_parts.Count, userExposed);
//newPart.LocalId = m_scene.AllocateLocalId();
AddPart(newPart);
SetPartAsNonRoot(newPart);
return newPart;
}
///
/// Reset the UUIDs for all the prims that make up this group.
///
///
/// This is called by methods which want to add a new group to an existing scene, in order
/// to ensure that there are no clashes with groups already present.
///
public void ResetIDs()
{
lock (m_parts.SyncRoot)
{
SceneObjectPart[] partsList = m_parts.GetArray();
m_parts.Clear();
foreach (SceneObjectPart part in partsList)
{
part.ResetIDs(part.LinkNum); // Don't change link nums
m_parts.Add(part.UUID, part);
}
}
}
///
///
///
///
public void ServiceObjectPropertiesFamilyRequest(IClientAPI remoteClient, UUID AgentID, uint RequestFlags)
{
remoteClient.SendObjectPropertiesFamilyData(RootPart, RequestFlags);
//remoteClient.SendObjectPropertiesFamilyData(RequestFlags, RootPart.UUID, RootPart.OwnerID, RootPart.GroupID, RootPart.BaseMask,
// RootPart.OwnerMask, RootPart.GroupMask, RootPart.EveryoneMask, RootPart.NextOwnerMask,
// RootPart.OwnershipCost, RootPart.ObjectSaleType, RootPart.SalePrice, RootPart.Category,
// RootPart.CreatorID, RootPart.Name, RootPart.Description);
}
public void SetPartOwner(SceneObjectPart part, UUID cAgentID, UUID cGroupID)
{
part.OwnerID = cAgentID;
part.GroupID = cGroupID;
}
#endregion
public override void Update()
{
// Check that the group was not deleted before the scheduled update
// FIXME: This is merely a temporary measure to reduce the incidence of failure when
// an object has been deleted from a scene before update was processed.
// A more fundamental overhaul of the update mechanism is required to eliminate all
// the race conditions.
if (IsDeleted || inTransit)
return;
if (IsAttachment)
{
ScenePresence sp = m_scene.GetScenePresence(AttachedAvatar);
sp?.SendAttachmentScheduleUpdate(this);
return;
}
// while physics doesn't suports LookAt, we do it in RootPart
if (!IsSelected)
RootPart.UpdateLookAt();
double now = Util.GetTimeStampMS();
RootPart.SendScheduledUpdates(now);
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if(part != RootPart)
part.SendScheduledUpdates(now);
}
}
///
/// Schedule a full update for this scene object to all interested viewers.
///
///
/// Ultimately, this should be managed such that region modules can invoke it at the end of a set of operations
/// so that either all changes are sent at once. However, currently, a large amount of internal
/// code will set this anyway when some object properties are changed.
///
public void ScheduleGroupForFullUpdate()
{
//if (IsAttachment)
// m_log.DebugFormat("[SOG]: Scheduling full update for {0} {1}", Name, LocalId);
if (Scene.GetNumberOfClients() == 0)
return;
RootPart.ScheduleFullUpdate();
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part != RootPart)
part.ScheduleFullUpdate();
}
}
public void ScheduleGroupForFullAnimUpdate()
{
//if (IsAttachment)
// m_log.DebugFormat("[SOG]: Scheduling full update for {0} {1}", Name, LocalId);
if (Scene.GetNumberOfClients() == 0)
return;
SceneObjectPart[] parts = m_parts.GetArray();
if (!RootPart.Shape.MeshFlagEntry)
{
RootPart.ScheduleFullUpdate();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part != RootPart)
part.ScheduleFullUpdate();
}
return;
}
RootPart.ScheduleFullAnimUpdate();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part != RootPart)
part.ScheduleFullAnimUpdate();
}
}
public void ScheduleGroupForUpdate(PrimUpdateFlags update)
{
//if (IsAttachment)
// m_log.DebugFormat("[SOG]: Scheduling full update for {0} {1}", Name, LocalId);
if (Scene.GetNumberOfClients() == 0)
return;
SceneObjectPart[] parts = m_parts.GetArray();
if (!RootPart.Shape.MeshFlagEntry)
update &= ~PrimUpdateFlags.Animations;
RootPart.ScheduleUpdate(update);
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part != RootPart)
part.ScheduleUpdate(update);
}
}
///
/// Schedule a terse update for this scene object to all interested viewers.
///
///
/// Ultimately, this should be managed such that region modules can invoke it at the end of a set of operations
/// so that either all changes are sent at once. However, currently, a large amount of internal
/// code will set this anyway when some object properties are changed.
///
public void ScheduleGroupForTerseUpdate()
{
//m_log.DebugFormat("[SOG]: Scheduling terse update for {0} {1}", Name, UUID);
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
parts[i].ScheduleTerseUpdate();
}
///
/// Immediately send an update for this scene object's root prim only.
/// This is for updates regarding the object as a whole, and none of its parts in particular.
/// Note: this may not be used by opensim (it probably should) but it's used by
/// external modules.
///
public void SendGroupRootTerseUpdate()
{
if (IsDeleted || inTransit)
return;
RootPart.SendTerseUpdateToAllClients();
}
public void QueueForUpdateCheck()
{
if (m_scene is null) // Need to check here as it's null during object creation
return;
m_scene.SceneGraph.AddToUpdateList(this);
}
///
/// Immediately send a terse update for this scene object.
///
public void SendGroupTerseUpdate()
{
if (IsDeleted || inTransit)
return;
if (IsAttachment)
{
ScenePresence sp = m_scene.GetScenePresence(AttachedAvatar);
if (sp is not null)
{
sp.SendAttachmentUpdate(this, PrimUpdateFlags.TerseUpdate);
return;
}
}
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
parts[i].SendTerseUpdateToAllClientsInternal();
}
///
/// Send metadata about the root prim (name, description, sale price, permissions, etc.) to a client.
///
///
public void SendPropertiesToClient(IClientAPI client)
{
m_rootPart.SendPropertiesToClient(client);
}
#region SceneGroupPart Methods
///
/// Get the child part by LinkNum
///
///
/// null if no child part with that linknum or child part
public SceneObjectPart GetLinkNumPart(int linknum)
{
if (linknum < 2)
{
return linknum switch
{
<0 => null,
// old code and sl do ignore linknum = 0 on linksets with more than one prim
0 => m_parts.Count > 1 ? null : RootPart,
_ => RootPart
};
}
Span parts = m_parts.GetArray().AsSpan();
if (linknum <= parts.Length)
{
SceneObjectPart sop = parts[linknum - 1];
if (sop.LinkNum == linknum)
return sop;
}
for (int i = 0; i < parts.Length; i++)
{
if (parts[i].LinkNum == linknum)
return parts[i];
}
return null;
}
///
/// Get a part with a given UUID
///
///
/// null if a part with the primID was not found
public SceneObjectPart GetPart(UUID primID)
{
if(m_parts.TryGetValue(primID, out SceneObjectPart childPart))
return childPart;
return null;
}
///
/// Get a part with a given local ID
///
///
/// null if a part with the local ID was not found
public SceneObjectPart GetPart(uint localID)
{
SceneObjectPart sop = m_scene.GetSceneObjectPart(localID);
if(sop.ParentGroup.LocalId == LocalId)
return sop;
return null;
}
#endregion
#region Packet Handlers
///
/// Link the prims in a given group to this group
///
///
/// Do not call this method directly - use Scene.LinkObjects() instead to avoid races between threads.
/// FIXME: There are places where scripts call these methods directly without locking. This is a potential race condition.
///
/// The group of prims which should be linked to this group
public void LinkToGroup(SceneObjectGroup objectGroup)
{
LinkToGroup(objectGroup, false);
}
// Link an existing group to this group.
// The group being linked need not be a linkset -- it can have just one prim.
public void LinkToGroup(SceneObjectGroup objectGroup, bool insert)
{
//m_log.DebugFormat(
// "[SCENE OBJECT GROUP]: Linking group with root part {0}, {1} to group with root part {2}, {3}",
// objectGroup.RootPart.Name, objectGroup.RootPart.UUID, RootPart.Name, RootPart.UUID);
// Linking to ourselves is not a valid operation.
if (objectGroup == this)
return;
// If the configured linkset capacity is greater than zero,
// and the new linkset would have a prim count higher than this
// value, do not link it.
if (m_scene.m_linksetCapacity > 0 &&
(PrimCount + objectGroup.PrimCount) >
m_scene.m_linksetCapacity)
{
m_log.DebugFormat(
"[SCENE OBJECT GROUP]: Cannot link group with root" +
" part {0}, {1} ({2} prims) to group with root part" +
" {3}, {4} ({5} prims) because the new linkset" +
" would exceed the configured maximum of {6}",
objectGroup.RootPart.Name, objectGroup.RootPart.UUID,
objectGroup.PrimCount, RootPart.Name, RootPart.UUID,
PrimCount, m_scene.m_linksetCapacity);
return;
}
// physical prims count limit
// not very eficient :(
if (UsesPhysics && m_scene.m_linksetPhysCapacity > 0 && (PrimCount + objectGroup.PrimCount) >
m_scene.m_linksetPhysCapacity)
{
int cntr = 0;
foreach (SceneObjectPart part in Parts)
{
if (part.PhysicsShapeType != (byte)PhysicsShapeType.None)
cntr++;
}
foreach (SceneObjectPart part in objectGroup.Parts)
{
if (part.PhysicsShapeType != (byte)PhysicsShapeType.None)
cntr++;
}
if (cntr > m_scene.m_linksetPhysCapacity)
{
// cancel physics
RootPart.Flags &= ~PrimFlags.Physics;
ApplyPhysics();
}
}
if(objectGroup.LinksetData is not null)
{
LinksetData ??= new LinksetData(m_scene.m_LinkSetDataLimit);
LinksetData.MergeOther(objectGroup.LinksetData);
objectGroup.LinksetData = null;
}
// 'linkPart' == the root of the group being linked into this group
SceneObjectPart linkPart = objectGroup.m_rootPart;
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = true;
if (linkPart.PhysActor is not null)
linkPart.PhysActor.Building = true;
// physics flags from group to be applied to linked parts
bool grpusephys = UsesPhysics;
bool grptemporary = IsTemporary;
// Remember where the group being linked thought it was
Vector3 oldGroupPosition = linkPart.GroupPosition;
Quaternion oldRootRotation = linkPart.RotationOffset;
// A linked SOP remembers its location and rotation relative to the root of a group.
// Convert the root of the group being linked to be relative to the
// root of the group being linked to.
// Note: Some of the assignments have complex side effects.
// First move the new group's root SOP's position to be relative to ours
// (radams1: Not sure if the multiple setting of OffsetPosition is required. If not,
// this code can be reordered to have a more logical flow.)
linkPart.setOffsetPosition(linkPart.GroupPosition - AbsolutePosition);
// Assign the new parent to the root of the old group
linkPart.ParentID = m_rootPart.LocalId;
// Now that it's a child, it's group position is our root position
linkPart.setGroupPosition(AbsolutePosition);
// Rotate the linking root SOP's position to be relative to the new root prim
Quaternion parentRot = m_rootPart.RotationOffset;
// Make the linking root SOP's rotation relative to the new root prim
Quaternion oldRot = linkPart.RotationOffset;
Quaternion newRot = Quaternion.Conjugate(parentRot) * oldRot;
linkPart.setRotationOffset(newRot);
Vector3 axPos = linkPart.OffsetPosition;
axPos *= Quaternion.Conjugate(parentRot);
linkPart.OffsetPosition = axPos;
// If there is only one SOP in a SOG, the LinkNum is zero. I.e., not a linkset.
// Now that we know this SOG has at least two SOPs in it, the new root
// SOP becomes the first in the linkset.
if (m_rootPart.LinkNum == 0)
m_rootPart.LinkNum = 1;
lock (m_parts.SyncRoot)
{
// Calculate the new link number for the old root SOP
int linkNum;
if (insert)
{
linkNum = 2;
int insertSize = objectGroup.PrimCount;
foreach (SceneObjectPart part in Parts)
{
if (part.LinkNum > 1)
part.LinkNum += insertSize;
}
}
else
{
linkNum = PrimCount + 1;
}
// Add the old root SOP as a part in our group's list
m_parts.Add(linkPart.UUID, linkPart);
linkPart.SetParent(this);
//linkPart.CreateSelected = true;
linkPart.UpdatePrimFlags(grpusephys, grptemporary, (IsPhantom || (linkPart.Flags & PrimFlags.Phantom) != 0), linkPart.VolumeDetectActive || RootPart.VolumeDetectActive, true);
// If the added SOP is physical, also tell the physics engine about the link relationship.
if (linkPart.PhysActor is not null && m_rootPart.PhysActor is not null && m_rootPart.PhysActor.IsPhysical)
{
linkPart.PhysActor.link(m_rootPart.PhysActor);
}
linkPart.LinkNum = linkNum++;
linkPart.UpdatePrimFlags(UsesPhysics, IsTemporary, IsPhantom, IsVolumeDetect, false);
// Get a list of the SOP's in the source group in order of their linknum's.
SceneObjectPart[] ogParts = objectGroup.Parts;
Array.Sort(ogParts, delegate(SceneObjectPart a, SceneObjectPart b)
{
return a.LinkNum - b.LinkNum;
});
// Add each of the SOP's from the source linkset to our linkset
for (int i = 0; i < ogParts.Length; i++)
{
SceneObjectPart part = ogParts[i];
if (part.UUID != objectGroup.m_rootPart.UUID)
{
LinkNonRootPart(part, oldGroupPosition, oldRootRotation, linkNum++);
// Update the physics flags for the newly added SOP
// (Is this necessary? LinkNonRootPart() has already called UpdatePrimFlags but with different flags!??)
part.UpdatePrimFlags(grpusephys, grptemporary, (IsPhantom || (part.Flags & PrimFlags.Phantom) != 0), part.VolumeDetectActive, true);
// If the added SOP is physical, also tell the physics engine about the link relationship.
if (part.PhysActor is not null && m_rootPart.PhysActor is not null && m_rootPart.PhysActor.IsPhysical)
{
part.PhysActor.link(m_rootPart.PhysActor);
}
}
part.ClearUndoState();
}
}
// Now that we've aquired all of the old SOG's parts, remove the old SOG from the scene.
m_scene.UnlinkSceneObject(objectGroup, true);
objectGroup.m_parts.Clear(); // do not dispose the parts moved to new group
objectGroup.Dispose();
// Can't do this yet since backup still makes use of the root part without any synchronization
// objectGroup.m_rootPart = null;
// If linking prims with different permissions, fix them
AdjustChildPrimPermissions(false);
GroupContainsForeignPrims = true;
AttachToBackup();
// Here's the deal, this is ABSOLUTELY CRITICAL so the physics scene gets the update about the
// position of linkset prims. IF YOU CHANGE THIS, YOU MUST TEST colliding with just linked and
// unmoved prims!
ResetChildPrimPhysicsPositions();
InvalidBoundsRadius();
InvalidatePartsLinkMaps();
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = false;
//HasGroupChanged = true;
//ScheduleGroupForFullUpdate();
}
///
/// Delink the given prim from this group. The delinked prim is established as
/// an independent SceneObjectGroup.
///
///
/// FIXME: This method should not be called directly since it bypasses update locking, allowing a potential race
/// condition. But currently there is no
/// alternative method that does take a lonk to delink a single prim.
///
///
/// The object group of the newly delinked prim. Null if part could not be found
public SceneObjectGroup DelinkFromGroup(uint partID)
{
return DelinkFromGroup(partID, true);
}
///
/// Delink the given prim from this group. The delinked prim is established as
/// an independent SceneObjectGroup.
///
///
/// FIXME: This method should not be called directly since it bypasses update locking, allowing a potential race
/// condition. But currently there is no
/// alternative method that does take a lonk to delink a single prim.
///
///
///
/// The object group of the newly delinked prim. Null if part could not be found
public SceneObjectGroup DelinkFromGroup(uint partID, bool sendEvents)
{
SceneObjectPart linkPart = GetPart(partID);
if (linkPart is not null)
{
return DelinkFromGroup(linkPart, sendEvents);
}
else
{
m_log.Warn($"[SCENE OBJECT GROUP]: DelinkFromGroup(): prim {partID} not found in object {UUID}");
return null;
}
}
///
/// Delink the given prim from this group. The delinked prim is established as
/// an independent SceneObjectGroup.
///
///
/// FIXME: This method should not be called directly since it bypasses update locking, allowing a potential race
/// condition. But currently there is no
/// alternative method that does take a lock to delink a single prim.
///
///
///
/// The object group of the newly delinked prim.
public SceneObjectGroup DelinkFromGroup(SceneObjectPart linkPart, bool sendEvents)
{
//m_log.DebugFormat(
// "[SCENE OBJECT GROUP]: Delinking part {0}, {1} from group with root part {2}, {3}",
// linkPart.Name, linkPart.UUID, RootPart.Name, RootPart.UUID);
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = true;
linkPart.ClearUndoState();
Vector3 worldPos = linkPart.GetWorldPosition();
Quaternion worldRot = linkPart.GetWorldRotation();
// Remove the part from this object
lock (m_parts.SyncRoot)
{
m_parts.Remove(linkPart.UUID);
SceneObjectPart[] parts = m_parts.GetArray();
// Rejigger the linknum's of the remaining SOP's to fill any gap
if (parts.Length == 1 && RootPart is not null)
{
// Single prim left
RootPart.LinkNum = 0;
}
else
{
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if (part.LinkNum > linkPart.LinkNum)
part.LinkNum--;
}
}
}
linkPart.ParentID = 0;
linkPart.LinkNum = 0;
PhysicsActor linkPartPa = linkPart.PhysActor;
// Remove the SOP from the physical scene.
// If the new SOG is physical, it is re-created later.
// (There is a problem here in that we have not yet told the physics
// engine about the delink. Someday, linksets should be made first
// class objects in the physics engine interface).
if (linkPartPa is not null)
{
m_scene.PhysicsScene.RemovePrim(linkPartPa);
m_scene.RemovePhysicalPrim(1);
linkPart.PhysActor = null;
}
// We need to reset the child part's position
// ready for life as a separate object after being a part of another object
/* This commented out code seems to recompute what GetWorldPosition already does.
* Replace with a call to GetWorldPosition (before unlinking)
Quaternion parentRot = m_rootPart.RotationOffset;
Vector3 axPos = linkPart.OffsetPosition;
axPos *= parentRot;
linkPart.OffsetPosition = new Vector3(axPos.X, axPos.Y, axPos.Z);
linkPart.GroupPosition = AbsolutePosition + linkPart.OffsetPosition;
linkPart.OffsetPosition = new Vector3(0, 0, 0);
*/
linkPart.setGroupPosition(worldPos);
linkPart.setOffsetPosition(Vector3.Zero);
linkPart.setRotationOffset(worldRot);
// Create a new SOG to go around this unlinked and unattached SOP
SceneObjectGroup objectGroup = new(linkPart);
m_scene.AddNewSceneObject(objectGroup, true);
linkPart.Rezzed = RootPart.Rezzed;
InvalidBoundsRadius();
InvalidatePartsLinkMaps();
InvalidateEffectivePerms();
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = false;
objectGroup.HasGroupChangedDueToDelink = true;
if (sendEvents)
linkPart.TriggerScriptChangedEvent(Changed.LINK);
return objectGroup;
}
/* working on it
public void DelinkFromGroup(List linkParts, bool sendEvents)
{
//m_log.DebugFormat(
// "[SCENE OBJECT GROUP]: Delinking part {0}, {1} from group with root part {2}, {3}",
// linkPart.Name, linkPart.UUID, RootPart.Name, RootPart.UUID);
if(PrimCount == 1)
return;
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = true;
bool unlinkroot = false;
foreach(SceneObjectPart linkPart in linkParts)
{
// first we only remove child parts
if(linkPart.LocalId == m_rootPart.LocalId)
{
unlinkroot = true;
continue;
}
lock (m_parts.SyncRoot)
if(!m_parts.Remove(linkPart.UUID))
continue;
linkPart.ClearUndoState();
Vector3 worldPos = linkPart.GetWorldPosition();
Quaternion worldRot = linkPart.GetWorldRotation();
linkPart.ParentID = 0;
linkPart.LinkNum = 0;
PhysicsActor linkPartPa = linkPart.PhysActor;
// Remove the SOP from the physical scene.
// If the new SOG is physical, it is re-created later.
// (There is a problem here in that we have not yet told the physics
// engine about the delink. Someday, linksets should be made first
// class objects in the physics engine interface).
if (linkPartPa is not null)
{
m_scene.PhysicsScene.RemovePrim(linkPartPa);
linkPart.PhysActor = null;
}
linkPart.setGroupPosition(worldPos);
linkPart.setOffsetPosition(Vector3.Zero);
linkPart.setRotationOffset(worldRot);
// Create a new SOG to go around this unlinked and unattached SOP
SceneObjectGroup objectGroup = new SceneObjectGroup(linkPart);
m_scene.AddNewSceneObject(objectGroup, true);
linkPart.Rezzed = RootPart.Rezzed;
// this is as it seems to be in sl now
if(linkPart.PhysicsShapeType == (byte)PhysShapeType.none)
linkPart.PhysicsShapeType = linkPart.DefaultPhysicsShapeType(); // root prims can't have type none for now
objectGroup.HasGroupChangedDueToDelink = true;
if (sendEvents)
linkPart.TriggerScriptChangedEvent(Changed.LINK);
}
if(unlinkroot)
{
//TODO
}
lock (m_parts.SyncRoot)
{
SceneObjectPart[] parts = m_parts.GetArray();
if (parts.Length == 1)
{
// Single prim left
m_rootPart.LinkNum = 0;
}
else
{
m_rootPart.LinkNum = 1;
int linknum = 2;
for (int i = 1; i < parts.Length; i++)
parts[i].LinkNum = linknum++;
}
}
InvalidBoundsRadius();
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = false;
// When we delete a group, we currently have to force persist to the database if the object id has changed
// (since delete works by deleting all rows which have a given object id)
Scene.SimulationDataService.RemoveObject(UUID, Scene.RegionInfo.RegionID);
HasGroupChangedDueToDelink = true;
TriggerScriptChangedEvent(Changed.LINK);
return;
}
*/
///
/// Stop this object from being persisted over server restarts.
///
///
public virtual void DetachFromBackup()
{
if (m_scene is not null)
{
m_scene.SceneGraph.FireDetachFromBackup(this);
if (Backup)
m_scene.EventManager.OnBackup -= ProcessBackup;
}
Backup = false;
}
// This links an SOP from a previous linkset into my linkset.
// The trick is that the SOP's position and rotation are relative to the old root SOP's
// so we are passed in the position and rotation of the old linkset so this can
// unjigger this SOP's position and rotation from the previous linkset and
// then make them relative to my linkset root.
private void LinkNonRootPart(SceneObjectPart part, Vector3 oldGroupPosition, Quaternion oldGroupRotation, int linkNum)
{
Quaternion parentRot = oldGroupRotation;
Quaternion oldRot = part.RotationOffset;
// Move our position in world
Vector3 axPos = part.OffsetPosition;
axPos *= parentRot;
Vector3 newPos = oldGroupPosition + axPos;
part.setGroupPosition(newPos);
part.setOffsetPosition(Vector3.Zero);
// Compution our rotation in world
Quaternion worldRot = parentRot * oldRot;
part.RotationOffset = worldRot;
// Add this SOP to our linkset
part.SetParent(this);
part.ParentID = m_rootPart.LocalId;
m_parts.Add(part.UUID, part);
part.LinkNum = linkNum;
// Compute the new position of this SOP relative to the group position
part.setOffsetPosition(newPos - AbsolutePosition);
// (radams1 20120711: I don't know why part.OffsetPosition is set multiple times.
// It would have the affect of setting the physics engine position multiple
// times. In theory, that is not necessary but I don't have a good linkset
// test to know that cleaning up this code wouldn't break things.)
// Compute the SOP's rotation relative to the rotation of the group.
parentRot = m_rootPart.RotationOffset;
Quaternion newRot = Quaternion.Conjugate(parentRot) * worldRot;
part.setRotationOffset(newRot);
Vector3 pos = part.OffsetPosition;
pos *= Quaternion.Conjugate(parentRot);
part.OffsetPosition = pos; // update position and orientation on physics also
// Since this SOP's state has changed, push those changes into the physics engine
// and the simulator.
// done on caller
//part.UpdatePrimFlags(UsesPhysics, IsTemporary, IsPhantom, IsVolumeDetect, false);
}
double lastTouchTime = 0;
///
/// If object is physical, apply force to move it around
/// If object is not physical, just put it at the resulting location
///
/// Part ID to check for grab
/// Always seems to be 0,0,0, so ignoring
/// New position. We do the math here to turn it into a force
///
public void GrabMovement(UUID partID, Vector3 offset, Vector3 pos, IClientAPI remoteClienth)
{
if (m_scene.EventManager.TriggerGroupMove(UUID, pos))
{
if (BlockGrabOverride)
return;
SceneObjectPart part = GetPart(partID);
if (part is null)
return;
if (part.BlockGrab)
return;
PhysicsActor pa = m_rootPart.PhysActor;
if (pa is not null && pa.IsPhysical)
{
// empirically convert distance diference to a impulse
Vector3 grabforce = pos - AbsolutePosition;
grabforce *= pa.Mass * 0.1f;
pa.AddForce(grabforce, false);
}
else
{
if(IsAttachment)
return;
// block movement if there was a touch at start
double now = Util.GetTimeStampMS();
if (now - lastTouchTime < 250)
{
lastTouchTime = now;
return;
}
// a touch or pass may had become active ??
if (((part.ScriptEvents & scriptEvents.anytouch) != 0) || (RootPart.ScriptEvents & scriptEvents.anytouch) != 0)
{
lastTouchTime = now;
return;
}
lastTouchTime = 0;
UpdateGroupPosition(pos);
}
}
}
///
/// If object is physical, prepare for spinning torques (set flag to save old orientation)
///
/// Rotation. We do the math here to turn it into a torque
///
public void SpinStart(IClientAPI remoteClient)
{
if (BlockGrabOverride || m_rootPart.BlockGrab)
return;
if (m_scene.EventManager.TriggerGroupSpinStart(UUID))
{
PhysicsActor pa = m_rootPart.PhysActor;
if (pa is not null)
{
if (pa.IsPhysical)
{
m_rootPart.IsWaitingForFirstSpinUpdatePacket = true;
}
}
}
}
///
/// If object is physical, apply torque to spin it around
///
/// Rotation. We do the math here to turn it into a torque
///
public void SpinMovement(Quaternion newOrientation, IClientAPI remoteClient)
{
// The incoming newOrientation, sent by the client, "seems" to be the
// desired target orientation. This needs further verification; in particular,
// one would expect that the initial incoming newOrientation should be
// fairly close to the original prim's physical orientation,
// m_rootPart.PhysActor.Orientation. This however does not seem to be the
// case (might just be an issue with different quaternions representing the
// same rotation, or it might be a coordinate system issue).
//
// Since it's not clear what the relationship is between the PhysActor.Orientation
// and the incoming orientations sent by the client, we take an alternative approach
// of calculating the delta rotation between the orientations being sent by the
// client. (Since a spin is invoked by ctrl+shift+drag in the client, we expect
// a steady stream of several new orientations coming in from the client.)
// This ensures that the delta rotations are being calculated from self-consistent
// pairs of old/new rotations. Given the delta rotation, we apply a torque around
// the delta rotation axis, scaled by the object mass times an arbitrary scaling
// factor (to ensure the resulting torque is not "too strong" or "too weak").
//
// Ideally we need to calculate (probably iteratively) the exact torque or series
// of torques needed to arrive exactly at the destination orientation. However, since
// it is not yet clear how to map the destination orientation (provided by the viewer)
// into PhysActor orientations (needed by the physics engine), we omit this step.
// This means that the resulting torque will at least be in the correct direction,
// but it will result in over-shoot or under-shoot of the target orientation.
// For the end user, this means that ctrl+shift+drag can be used for relative,
// but not absolute, adjustments of orientation for physical prims.
if (BlockGrabOverride || m_rootPart.BlockGrab)
return;
if (m_scene.EventManager.TriggerGroupSpin(UUID, newOrientation))
{
PhysicsActor pa = m_rootPart.PhysActor;
if (pa is not null && pa.IsPhysical)
{
if (m_rootPart.IsWaitingForFirstSpinUpdatePacket)
{
// first time initialization of "old" orientation for calculation of delta rotations
m_rootPart.SpinOldOrientation = newOrientation;
m_rootPart.IsWaitingForFirstSpinUpdatePacket = false;
}
else
{
// save and update old orientation
Quaternion old = m_rootPart.SpinOldOrientation;
m_rootPart.SpinOldOrientation = newOrientation;
//m_log.Error("[SCENE OBJECT GROUP]: Old orientation is " + old);
//m_log.Error("[SCENE OBJECT GROUP]: Incoming new orientation is " + newOrientation);
// compute difference between previous old rotation and new incoming rotation
Quaternion minimalRotationFromQ1ToQ2 = newOrientation * Quaternion.Inverse(old);
minimalRotationFromQ1ToQ2.GetAxisAngle(out Vector3 spinforce, out float rotationAngle);
if(Math.Abs(rotationAngle)< 0.001)
return;
spinforce.Normalize();
//m_log.Error("SCENE OBJECT GROUP]: rotation axis is " + rotationAxis);
if(rotationAngle > 0)
spinforce = spinforce * pa.Mass * 0.1f; // 0.1 is an arbitrary torque scaling factor
else
spinforce = spinforce * pa.Mass * -0.1f; // 0.1 is an arbitrary torque scaling
pa.AddAngularForce(spinforce,true);
}
}
else
{
NonPhysicalSpinMovement(newOrientation);
}
}
}
///
/// Apply rotation for spinning non-physical linksets (Ctrl+Shift+Drag)
/// As with dragging, scripted objects must be blocked from spinning
///
/// New Rotation
private void NonPhysicalSpinMovement(Quaternion newOrientation)
{
if(!IsAttachment && ScriptCount() == 0)
UpdateGroupRotationR(newOrientation);
}
///
/// Set the name of a prim
///
///
///
public void SetPartName(string name, uint localID)
{
SceneObjectPart part = GetPart(localID);
if (part is not null)
{
part.Name = name;
}
}
public void SetPartDescription(string des, uint localID)
{
SceneObjectPart part = GetPart(localID);
if (part is not null)
{
part.Description = des;
}
}
public void SetPartText(string text, uint localID)
{
SceneObjectPart part = GetPart(localID);
part?.SetText(text);
}
public void SetPartText(string text, UUID partID)
{
SceneObjectPart part = GetPart(partID);
part?.SetText(text);
}
public string GetPartName(uint localID)
{
SceneObjectPart part = GetPart(localID);
return part is not null ? part.Name : string.Empty;
}
public string GetPartDescription(uint localID)
{
SceneObjectPart part = GetPart(localID);
return part is not null ? part.Description : string.Empty;
}
///
/// Update prim flags for this group.
///
///
///
///
///
///
public void UpdateFlags(bool UsePhysics, bool SetTemporary, bool SetPhantom, bool SetVolumeDetect)
{
if (m_scene is null || IsDeleted)
return;
HasGroupChanged = true;
if (SetTemporary)
{
DetachFromBackup();
// Remove from database and parcel prim count
//
m_scene.DeleteFromStorage(UUID);
}
else if (!Backup)
{
// Previously been temporary now switching back so make it
// available for persisting again
AttachToBackup();
}
SceneObjectPart[] parts = m_parts.GetArray();
if (UsePhysics)
{
int maxprims = m_scene.m_linksetPhysCapacity;
bool checkShape = maxprims > 0 && parts.Length > maxprims;
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
if(part.PhysicsShapeType == (byte)PhysicsShapeType.None)
continue; // assuming root type was checked elsewhere
if (checkShape)
{
if (--maxprims < 0)
{
UsePhysics = false;
break;
}
}
if (part.Scale.X > m_scene.m_maxPhys ||
part.Scale.Y > m_scene.m_maxPhys ||
part.Scale.Z > m_scene.m_maxPhys )
{
UsePhysics = false; // Reset physics
break;
}
}
}
if (parts.Length > 1)
{
m_rootPart.UpdatePrimFlags(UsePhysics, SetTemporary, SetPhantom, SetVolumeDetect, true);
for (int i = 0; i < parts.Length; i++)
{
if (parts[i].UUID != m_rootPart.UUID)
parts[i].UpdatePrimFlags(UsePhysics, SetTemporary, SetPhantom, SetVolumeDetect, true);
}
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = false;
}
else
m_rootPart.UpdatePrimFlags(UsePhysics, SetTemporary, SetPhantom, SetVolumeDetect, false);
m_scene.EventManager.TriggerParcelPrimCountTainted();
}
public void UpdateExtraParam(uint localID, ushort type, bool inUse, byte[] data)
{
SceneObjectPart part = GetPart(localID);
part?.UpdateExtraParam(type, inUse, data);
}
///
/// Gets the number of parts
///
///
public int GetPartCount()
{
return Parts.Length;
}
public void AdjustChildPrimPermissions(bool forceTaskInventoryPermissive)
{
uint newOwnerMask = (uint)(PermissionMask.All | PermissionMask.Export) & 0xfffffff0; // Mask folded bits
uint foldedPerms = RootPart.OwnerMask & (uint)PermissionMask.FoldedMask;
ForEachPart(part =>
{
newOwnerMask &= part.BaseMask;
if (part != RootPart)
part.ClonePermissions(RootPart);
if (forceTaskInventoryPermissive)
part.Inventory.ApplyGodPermissions(part.BaseMask);
});
uint lockMask = ~(uint)(PermissionMask.Move);
uint lockBit = RootPart.OwnerMask & (uint)(PermissionMask.Move);
RootPart.OwnerMask = (RootPart.OwnerMask & lockBit) | ((newOwnerMask | foldedPerms) & lockMask);
//m_log.DebugFormat(
// "[SCENE OBJECT GROUP]: RootPart.OwnerMask now {0} for {1} in {2}",
// (OpenMetaverse.PermissionMask)RootPart.OwnerMask, Name, Scene.Name);
InvalidateEffectivePerms();
RootPart.ScheduleFullUpdate();
}
public void UpdatePermissions(UUID AgentID, byte field, uint localID,
uint mask, byte addRemTF)
{
RootPart.UpdatePermissions(AgentID, field, localID, mask, addRemTF);
bool god = Scene.Permissions.IsGod(AgentID);
if (field == 1 && god)
{
ForEachPart(part =>
{
part.BaseMask = RootPart.BaseMask;
});
}
AdjustChildPrimPermissions(false);
if (field == 1 && god) // Base mask was set. Update all child part inventories
{
foreach (SceneObjectPart part in Parts)
part.Inventory.ApplyGodPermissions(RootPart.BaseMask);
InvalidateEffectivePerms();
}
HasGroupChanged = true;
// Send the group's properties to all clients once all parts are updated
if (Scene.TryGetClient(AgentID, out IClientAPI client))
SendPropertiesToClient(client);
}
#endregion
#region Shape
///
///
///
///
public void UpdateShape(ObjectShapePacket.ObjectDataBlock shapeBlock, uint localID)
{
SceneObjectPart part = GetPart(localID);
part?.UpdateShape(shapeBlock);
InvalidBoundsRadius();
}
#endregion
#region Resize
///
/// Resize the entire group of prims.
///
///
public void GroupResize(Vector3 scale)
{
//m_log.DebugFormat(
// "[SCENE OBJECT GROUP]: Group resizing {0} {1} from {2} to {3}", Name, LocalId, RootPart.Scale, scale);
if (Scene is null)
return;
PhysicsActor pa = m_rootPart.PhysActor;
float minsize = Scene.m_minNonphys;
float maxsize = Scene.m_maxNonphys;
if (pa is not null && pa.IsPhysical)
{
minsize = Scene.m_minPhys;
maxsize = Scene.m_maxPhys;
}
scale.X = Utils.Clamp(scale.X, minsize, maxsize);
scale.Y = Utils.Clamp(scale.Y, minsize, maxsize);
scale.Z = Utils.Clamp(scale.Z, minsize, maxsize);
// requested scaling factors
float x = scale.X / RootPart.Scale.X;
float y = scale.Y / RootPart.Scale.Y;
float z = scale.Z / RootPart.Scale.Z;
SceneObjectPart[] parts = m_parts.GetArray();
// fix scaling factors so parts don't violate dimensions
for(int i = 0; i < parts.Length; i++)
{
SceneObjectPart obPart = parts[i];
if(obPart.UUID != m_rootPart.UUID)
{
Vector3 oldSize = obPart.Scale;
float f;
if(oldSize.X * x > maxsize)
{
f = maxsize / oldSize.X;
f /= x;
x *= f;
y *= f;
z *= f;
}
else if(oldSize.X * x < minsize)
{
f = minsize / oldSize.X;
f /= x;
x *= f;
y *= f;
z *= f;
}
if(oldSize.Y * y > maxsize)
{
f = maxsize / oldSize.Y;
f /= y;
x *= f;
y *= f;
z *= f;
}
else if(oldSize.Y * y < minsize)
{
f = minsize / oldSize.Y;
f /= y;
x *= f;
y *= f;
z *= f;
}
if(oldSize.Z * z > maxsize)
{
f = maxsize / oldSize.Z;
f /= z;
x *= f;
y *= f;
z *= f;
}
else if(oldSize.Z * z < minsize)
{
f = minsize / oldSize.Z;
f /= z;
x *= f;
y *= f;
z *= f;
}
}
}
Vector3 rootScale = RootPart.Scale;
rootScale.X *= x;
rootScale.Y *= y;
rootScale.Z *= z;
RootPart.Scale = rootScale;
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart obPart = parts[i];
if (obPart != m_rootPart)
{
Vector3 currentpos = obPart.OffsetPosition;
currentpos.X *= x;
currentpos.Y *= y;
currentpos.Z *= z;
Vector3 newSize = obPart.Scale;
newSize.X *= x;
newSize.Y *= y;
newSize.Z *= z;
obPart.Scale = newSize;
obPart.UpdateOffSet(currentpos);
}
}
InvalidBoundsRadius();
HasGroupChanged = true;
m_rootPart.TriggerScriptChangedEvent(Changed.SCALE);
ScheduleGroupForFullUpdate();
}
public bool GroupResize(double fscale)
{
//m_log.DebugFormat(
// "[SCENE OBJECT GROUP]: Group resizing {0} {1} from {2} to {3}", Name, LocalId, RootPart.Scale, fscale);
if (Scene is null || IsDeleted || inTransit || fscale < 0)
return false;
// ignore lsl restrictions. let them be done a LSL
PhysicsActor pa = m_rootPart.PhysActor;
RootPart.KeyframeMotion?.Suspend();
float minsize = Scene.m_minNonphys;
float maxsize = Scene.m_maxNonphys;
// assuming physics is more restrictive
if (pa is not null && pa.IsPhysical)
{
minsize = Scene.m_minPhys;
maxsize = Scene.m_maxPhys;
}
SceneObjectPart[] parts = m_parts.GetArray();
float tmp;
// check scaling factor so parts don't violate dimensions
for(int i = 0; i < parts.Length; i++)
{
SceneObjectPart obPart = parts[i];
Vector3 oldSize = obPart.Scale;
tmp = (float)(oldSize.X * fscale);
if(tmp > maxsize)
return false;
if(tmp < minsize)
return false;
tmp = (float)(oldSize.Y * fscale);
if(tmp > maxsize)
return false;
if(tmp < minsize)
return false;
tmp = (float)(oldSize.Z * fscale);
if(tmp > maxsize)
return false;
if(tmp < minsize)
return false;
}
Vector3 newSize = RootPart.Scale * (float)fscale;
if(pa is not null)
pa.Building = true;
RootPart.Scale = newSize;
Vector3 currentpos;
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart obPart = parts[i];
if (obPart != m_rootPart)
{
obPart.Scale *= (float)fscale;
currentpos = obPart.OffsetPosition * (float)fscale;
obPart.UpdateOffSet(currentpos);
}
}
if(pa is not null)
pa.Building = false;
InvalidBoundsRadius();
HasGroupChanged = true;
m_rootPart.TriggerScriptChangedEvent(Changed.SCALE);
ScheduleGroupForFullUpdate();
RootPart.KeyframeMotion?.Resume();
return true;
}
public float GetMaxGroupResizeScale()
{
if (Scene is null || IsDeleted || inTransit)
return 1.0f;
float maxsize = Scene.m_maxNonphys;
PhysicsActor pa = m_rootPart.PhysActor;
// assuming physics is more restrictive
if (pa is not null && pa.IsPhysical)
maxsize = Scene.m_maxPhys;
SceneObjectPart[] parts = m_parts.GetArray();
float larger = float.MinValue;
for(int i = 0; i < parts.Length; i++)
{
SceneObjectPart obPart = parts[i];
Vector3 oldSize = obPart.Scale;
if(larger < oldSize.X)
larger = oldSize.X;
if(larger < oldSize.Y)
larger = oldSize.Y;
if(larger < oldSize.Z)
larger = oldSize.Z;
}
if(larger >= maxsize)
return 1.0f;
larger += 1e-3f;
float fscale = maxsize / larger;
return fscale;
}
public float GetMinGroupResizeScale()
{
if (Scene is null || IsDeleted || inTransit)
return 1.0f;
float minsize = Scene.m_minNonphys;
PhysicsActor pa = m_rootPart.PhysActor;
// assuming physics is more restrictive
if (pa is not null && pa.IsPhysical)
minsize = Scene.m_minPhys;
SceneObjectPart[] parts = m_parts.GetArray();
float smaller = float.MaxValue;
for(int i = 0; i < parts.Length; i++)
{
SceneObjectPart obPart = parts[i];
Vector3 oldSize = obPart.Scale;
if(smaller > oldSize.X)
smaller = oldSize.X;
if(smaller > oldSize.Y)
smaller = oldSize.Y;
if(smaller > oldSize.Z)
smaller = oldSize.Z;
}
if(smaller <= minsize)
return 1.0f;
if(smaller > 2e-3f)
smaller -= 1e-3f;
float fscale = minsize / smaller;
if(fscale < 1e-8f)
fscale = 1e-8f;
return fscale;
}
#endregion
#region Position
///
/// Move this scene object
///
///
public void UpdateGroupPosition(Vector3 pos)
{
if (m_scene.EventManager.TriggerGroupMove(UUID, pos))
{
if (IsAttachment)
{
m_rootPart.AttachedPos = pos;
}
else if (RootPart.GetStatusSandbox())
{
Vector3 mov = pos - RootPart.StatusSandboxPos;
float movLenSQ = mov.LengthSquared();
if (movLenSQ > 100.5f)
{
mov *= 10.0f / MathF.Sqrt(movLenSQ);
AbsolutePosition = RootPart.StatusSandboxPos + mov;
RootPart.ScriptSetPhysicsStatus(false);
Scene.SimChat(Utils.StringToBytes("Hit Sandbox Limit"),
ChatTypeEnum.DebugChannel, 0x7FFFFFFF, RootPart.AbsolutePosition, Name, UUID, false);
HasGroupChanged = true;
return;
}
}
AbsolutePosition = pos;
HasGroupChanged = true;
}
//we need to do a terse update even if the move wasn't allowed
// so that the position is reset in the client (the object snaps back)
RootPart.ScheduleTerseUpdate();
}
///
/// Update the position of a single part of this scene object
///
///
///
///
public void UpdateSinglePosition(Vector3 pos, uint localID)
{
SceneObjectPart part = GetPart(localID);
if (part is not null)
{
// unlock parts position change
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = true;
if (part.UUID == m_rootPart.UUID)
{
UpdateRootPosition(pos);
}
else
{
part.UpdateOffSet(pos);
}
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = false;
HasGroupChanged = true;
}
}
///
/// Update just the root prim position in a linkset
///
///
public void UpdateRootPosition(Vector3 newPos)
{
// needs to be called with phys building true
Vector3 oldPos;
if (IsAttachment)
oldPos = m_rootPart.AttachedPos + m_rootPart.OffsetPosition; // OffsetPosition should always be 0 in an attachments's root prim
else
oldPos = AbsolutePosition + m_rootPart.OffsetPosition;
Vector3 diff = oldPos - newPos;
Quaternion partRotation = m_rootPart.RotationOffset;
diff *= Quaternion.Inverse(partRotation);
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart obPart = parts[i];
if (obPart != m_rootPart)
obPart.OffsetPosition += diff;
}
AbsolutePosition = newPos;
if (IsAttachment)
m_rootPart.AttachedPos = newPos;
HasGroupChanged = true;
if (m_rootPart.Undoing)
{
ScheduleGroupForFullUpdate();
}
else
{
ScheduleGroupForTerseUpdate();
}
}
#endregion
#region Rotation
///
/// Update the rotation of the group.
///
///
public void UpdateGroupRotationR(Quaternion rot)
{
m_rootPart.UpdateRotation(rot);
/* this is done by rootpart RotationOffset set called by UpdateRotation
PhysicsActor actor = m_rootPart.PhysActor;
if (actor is not null)
{
actor.Orientation = m_rootPart.RotationOffset;
m_scene.PhysicsScene.AddPhysicsActorTaint(actor);
}
*/
HasGroupChanged = true;
ScheduleGroupForTerseUpdate();
}
///
/// Update the position and rotation of a group simultaneously.
///
///
///
public void UpdateGroupRotationPR(Vector3 pos, Quaternion rot)
{
m_rootPart.UpdateRotation(rot);
//already done above
//PhysicsActor actor = m_rootPart.PhysActor;
//if (actor is not null)
//{
// actor.Orientation = m_rootPart.RotationOffset;
//}
if (IsAttachment)
{
m_rootPart.AttachedPos = pos;
}
AbsolutePosition = pos;
HasGroupChanged = true;
ScheduleGroupForTerseUpdate();
}
///
/// Update the rotation of a single prim within the group.
///
///
///
public void UpdateSingleRotation(Quaternion rot, uint localID)
{
SceneObjectPart part = GetPart(localID);
if (part is not null)
{
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = true;
if (part == m_rootPart)
{
UpdateRootRotation(rot);
}
else
{
part.UpdateRotation(rot);
}
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = false;
}
}
///
/// Update the position and rotation simultaneously of a single prim within the group.
///
///
///
public void UpdateSingleRotation(Quaternion rot, Vector3 pos, uint localID)
{
SceneObjectPart part = GetPart(localID);
if (part is not null)
{
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = true;
if (part.UUID == m_rootPart.UUID)
{
UpdateRootRotation(rot);
AbsolutePosition = pos;
}
else
{
part.UpdateRotation(rot);
part.OffsetPosition = pos;
}
if (m_rootPart.PhysActor is not null)
m_rootPart.PhysActor.Building = false;
}
}
///
/// Update the rotation of just the root prim of a linkset.
///
///
public void UpdateRootRotation(Quaternion rot)
{
// needs to be called with phys building true
Quaternion transformRot = Quaternion.Inverse(rot) * m_rootPart.RotationOffset;
//Don't use UpdateRotation because it schedules an update prematurely
m_rootPart.RotationOffset = rot;
PhysicsActor pa = m_rootPart.PhysActor;
if (pa is not null)
pa.Orientation = rot;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart prim = parts[i];
if (prim != m_rootPart)
{
prim.RotationOffset = transformRot * prim.RotationOffset;
prim.OffsetPosition *= transformRot;
}
}
HasGroupChanged = true;
ScheduleGroupForFullUpdate();
}
private enum updatetype :int
{
none = 0,
partterse = 1,
partfull = 2,
groupterse = 3,
groupfull = 4
}
public void doChangeObject(SceneObjectPart part, ObjectChangeData data)
{
// TODO this still as excessive *.Schedule*Update()s
if (part is not null && part.ParentGroup is not null)
{
ObjectChangeType change = data.change;
bool togroup = (change & ObjectChangeType.Group) != 0;
SceneObjectGroup group = part.ParentGroup;
PhysicsActor pha = group.RootPart.PhysActor;
updatetype updateType = updatetype.none;
if (togroup)
{
// related to group
if ((change & (ObjectChangeType.Rotation | ObjectChangeType.Position)) != 0)
{
if ((change & ObjectChangeType.Rotation) != 0)
{
group.RootPart.UpdateRotation(data.rotation);
updateType = updatetype.none;
}
if ((change & ObjectChangeType.Position) != 0)
{
if (IsAttachment || m_scene.Permissions.CanObjectEntry(group, false, data.position))
UpdateGroupPosition(data.position);
updateType = updatetype.groupterse;
}
else
// ugly rotation update of all parts
{
group.ResetChildPrimPhysicsPositions();
}
}
if ((change & ObjectChangeType.Scale) != 0)
{
if (pha is not null)
pha.Building = true;
group.GroupResize(data.scale);
updateType = updatetype.none;
if (pha is not null)
pha.Building = false;
}
}
else
{
// related to single prim in a link-set ( ie group)
if (pha is not null)
pha.Building = true;
// root part is special
// parts offset positions or rotations need to change also
if (part == group.RootPart)
{
if ((change & ObjectChangeType.Rotation) != 0)
group.UpdateRootRotation(data.rotation);
if ((change & ObjectChangeType.Position) != 0)
group.UpdateRootPosition(data.position);
if ((change & ObjectChangeType.Scale) != 0)
part.Resize(data.scale);
}
else
{
if ((change & ObjectChangeType.Position) != 0)
{
part.OffsetPosition = data.position;
updateType = updatetype.partterse;
}
if ((change & ObjectChangeType.Rotation) != 0)
{
part.UpdateRotation(data.rotation);
updateType = updatetype.none;
}
if ((change & ObjectChangeType.Scale) != 0)
{
part.Resize(data.scale);
updateType = updatetype.none;
}
}
if (pha is not null)
pha.Building = false;
}
if (updateType != updatetype.none)
{
group.HasGroupChanged = true;
switch (updateType)
{
case updatetype.partterse:
part.ScheduleTerseUpdate();
break;
case updatetype.partfull:
part.ScheduleFullUpdate();
break;
case updatetype.groupterse:
group.ScheduleGroupForTerseUpdate();
break;
case updatetype.groupfull:
group.ScheduleGroupForFullUpdate();
break;
default:
break;
}
}
}
}
#endregion
public void SetAxisRotation(int axis, int rotate10)
{
if((axis & (int)(axisSelect.STATUS_ROTATE_X | axisSelect.STATUS_ROTATE_Y | axisSelect.STATUS_ROTATE_Z)) == 0)
return;
bool lockaxis = rotate10 == 0; // zero means axis locked
byte locks = RootPart.RotationAxisLocks;
if ((axis & (int)axisSelect.STATUS_ROTATE_X) != 0)
{
if (lockaxis)
locks |= (byte)axisSelect.STATUS_ROTATE_X;
else
locks &= (byte)axisSelect.NOT_STATUS_ROTATE_X;
}
if ((axis & (int)axisSelect.STATUS_ROTATE_Y) != 0)
{
if (lockaxis)
locks |= (byte)axisSelect.STATUS_ROTATE_Y;
else
locks &= (byte)axisSelect.NOT_STATUS_ROTATE_Y;
}
if ((axis & (int)axisSelect.STATUS_ROTATE_Z) != 0)
{
if (lockaxis)
locks |= (byte)axisSelect.STATUS_ROTATE_Z;
else
locks &= (byte)axisSelect.NOT_STATUS_ROTATE_Z;
}
RootPart.RotationAxisLocks = locks;
RootPart.SetPhysicsAxisRotation();
}
public int GetAxisRotation(int axis)
{
byte rotAxislocks = RootPart.RotationAxisLocks;
// if multiple return the one with higher id
if (axis == (int)axisSelect.STATUS_ROTATE_Z)
return (rotAxislocks & (byte)axisSelect.STATUS_ROTATE_Z) == 0 ? 1:0;
if (axis == (int)axisSelect.STATUS_ROTATE_Y)
return (rotAxislocks & (byte)axisSelect.STATUS_ROTATE_Y) == 0 ? 1:0;
if (axis == (int)axisSelect.STATUS_ROTATE_X)
return (rotAxislocks & (byte)SceneObjectGroup.axisSelect.STATUS_ROTATE_X) == 0 ? 1:0;
return 0;
}
public int RegisterRotTargetWaypoint(UUID scriptID, Quaternion target, float tolerance)
{
int handle = m_scene.AllocateIntId();
scriptRotTarget waypoint = new()
{
targetRot = target,
tolerance = tolerance,
scriptID = scriptID,
handle = handle
};
lock (m_targets)
{
if(m_targetsByScript.TryGetValue(scriptID, out List handles))
{
if (handles.Count >= 8)
{
int todel = handles[0];
handles.RemoveAt(0);
if(!m_rotTargets.Remove(todel))
m_targets.Remove(todel);
}
handles.Add(handle);
}
else
m_targetsByScript[scriptID] = new List(){handle};
m_rotTargets.Add(handle, waypoint);
m_scene.AddGroupTarget(this);
}
return handle;
}
public void UnRegisterRotTargetWaypoint(int handle)
{
lock (m_targets)
{
if(m_rotTargets.TryGetValue(handle, out scriptRotTarget waypoint))
{
if(m_targetsByScript.TryGetValue(waypoint.scriptID, out Listhandles))
{
handles.Remove(handle);
if(handles.Count == 0)
m_targetsByScript.Remove(waypoint.scriptID);
}
m_rotTargets.Remove(handle);
}
if (m_targets.Count == 0 && m_rotTargets.Count == 0)
m_scene.RemoveGroupTarget(this);
}
}
public int RegisterTargetWaypoint(UUID scriptID, Vector3 target, float tolerance)
{
int handle = m_scene.AllocateIntId();
scriptPosTarget waypoint = new()
{
targetPos = target,
tolerance = tolerance * tolerance,
scriptID = scriptID,
handle = handle
};
lock (m_targets)
{
if (m_targetsByScript.TryGetValue(scriptID, out List handles))
{
if (handles.Count >= 8)
{
int todel = handles[0];
handles.RemoveAt(0);
if(!m_targets.Remove(todel))
m_rotTargets.Remove(todel);
}
handles.Add(handle);
}
else
m_targetsByScript[scriptID] = new List() { handle };
m_targets.Add(handle, waypoint);
m_scene.AddGroupTarget(this);
}
return handle;
}
public void UnregisterTargetWaypoint(int handle)
{
lock (m_targets)
{
if (m_targets.TryGetValue(handle, out scriptPosTarget waypoint))
{
if (m_targetsByScript.TryGetValue(waypoint.scriptID, out List handles))
{
handles.Remove(handle);
if (handles.Count == 0)
m_targetsByScript.Remove(waypoint.scriptID);
}
m_targets.Remove(handle);
}
if (m_targets.Count == 0 && m_rotTargets.Count == 0)
m_scene.RemoveGroupTarget(this);
}
}
public void RemoveScriptTargets(UUID scriptID)
{
lock (m_targets)
{
if(m_targetsByScript.TryGetValue(scriptID, out List toremove))
{
m_targetsByScript.Remove(scriptID);
if (toremove.Count > 0)
{
for (int i = 0; i < toremove.Count; ++i)
{
if(!m_targets.Remove(toremove[i]))
m_rotTargets.Remove(toremove[i]);
}
}
}
m_scene.RemoveGroupTarget(this);
}
}
public void CheckAtTargets()
{
int targetsCount = m_targets.Count;
if (targetsCount > 0 && (m_scriptListens_atTarget || m_scriptListens_notAtTarget))
{
List atTargets = new();
HashSet notatTargets = new();
Vector3 pos = m_rootPart.GroupPosition;
lock (m_targets)
{
foreach (scriptPosTarget target in m_targets.Values)
{
if (Vector3.DistanceSquared(target.targetPos, pos) <= target.tolerance)
{
if (m_scriptListens_atTarget)
atTargets.Add(target);
notatTargets.Remove(target.scriptID);
}
else
{
if (m_scriptListens_notAtTarget)
notatTargets.Add(target.scriptID);
}
}
}
if (atTargets.Count > 0)
{
for (int target = 0; target < atTargets.Count; ++target)
{
scriptPosTarget att = atTargets[target];
m_scene.EventManager.TriggerAtTargetEvent(att.scriptID, (uint)att.handle, att.targetPos, pos);
}
}
if (notatTargets.Count > 0)
{
foreach (UUID id in notatTargets)
{
m_scene.EventManager.TriggerNotAtTargetEvent(id);
}
}
}
targetsCount = m_rotTargets.Count;
if (targetsCount > 0 && (m_scriptListens_atRotTarget || m_scriptListens_notAtRotTarget))
{
List atRotTargets = new(targetsCount);
HashSet notatRotTargets = new();
Quaternion rot = m_rootPart.RotationOffset;
lock (m_targets)
{
foreach (scriptRotTarget target in m_rotTargets.Values)
{
double angle = 2 * Math.Acos(Quaternion.Dot(target.targetRot, rot));
if (angle < 0)
angle = -angle;
if (angle > Math.PI)
angle = (2 * Math.PI - angle);
if (angle <= target.tolerance)
{
if (m_scriptListens_atRotTarget)
atRotTargets.Add(target);
notatRotTargets.Remove(target.scriptID);
}
else
{
if (m_scriptListens_notAtRotTarget)
notatRotTargets.Add(target.scriptID);
}
}
}
if (atRotTargets.Count > 0)
{
for (int target = 0; target < atRotTargets.Count; ++target)
{
scriptRotTarget att = atRotTargets[target];
m_scene.EventManager.TriggerAtRotTargetEvent(att.scriptID, (uint)att.handle, att.targetRot, rot);
}
}
if (notatRotTargets.Count > 0)
{
foreach (UUID id in notatRotTargets)
{
m_scene.EventManager.TriggerNotAtRotTargetEvent(id);
}
}
}
}
public Vector3 GetGeometricCenter()
{
// this is not real geometric center but a average of positions relative to root prim acording to
// http://wiki.secondlife.com/wiki/llGetGeometricCenter
// ignoring tortured prims details since sl also seems to ignore
// so no real use in doing it on physics
SceneObjectPart[] parts = m_parts.GetArray();
if (parts.Length < 2)
return Vector3.Zero;
Vector3 gc = Vector3.Zero;
// average all parts positions
for (int i = 0; i < parts.Length; i++)
{
if (parts[i] != RootPart)
gc += parts[i].OffsetPosition;
}
gc /= parts.Length;
return gc;
}
public float GetMass()
{
float retmass = 0f;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
retmass += parts[i].GetMass();
return retmass;
}
// center of mass of full object
public Vector3 GetCenterOfMass()
{
PhysicsActor pa = RootPart.PhysActor;
if(((RootPart.Flags & PrimFlags.Physics) !=0) && pa !=null)
{
// physics knows better about center of mass of physical prims
Vector3 tmp = pa.CenterOfMass;
return tmp;
}
Vector3 Ptot = Vector3.Zero;
float totmass = 0f;
float m;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
m = parts[i].GetMass();
Ptot += parts[i].GetPartCenterOfMass() * m;
totmass += m;
}
if (totmass == 0)
totmass = 0;
else
totmass = 1 / totmass;
Ptot *= totmass;
return Ptot;
}
public void GetInertiaData(out float TotalMass, out Vector3 CenterOfMass, out Vector3 Inertia, out Vector4 aux )
{
PhysicsActor pa = RootPart.PhysActor;
if(((RootPart.Flags & PrimFlags.Physics) !=0) && pa !=null)
{
PhysicsInertiaData inertia;
inertia = pa.GetInertiaData();
TotalMass = inertia.TotalMass;
CenterOfMass = inertia.CenterOfMass;
Inertia = inertia.Inertia;
aux = inertia.InertiaRotation;
return;
}
TotalMass = GetMass();
CenterOfMass = GetCenterOfMass() - AbsolutePosition;
CenterOfMass *= Quaternion.Conjugate(RootPart.RotationOffset);
Inertia = Vector3.Zero;
aux = Vector4.Zero;
}
public void SetInertiaData(float TotalMass, Vector3 CenterOfMass, Vector3 Inertia, Vector4 aux )
{
PhysicsInertiaData inertiaData = new()
{
TotalMass = TotalMass,
CenterOfMass = CenterOfMass,
Inertia = Inertia,
InertiaRotation = aux
};
if(TotalMass < 0)
RootPart.PhysicsInertia = null;
else
RootPart.PhysicsInertia = inertiaData;
PhysicsActor pa = RootPart.PhysActor;
pa?.SetInertiaData(inertiaData);
}
///
/// Set the user group to which this scene object belongs.
///
///
///
public void SetGroup(UUID GroupID, IClientAPI client)
{
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
SceneObjectPart part = parts[i];
part.SetGroup(GroupID, client);
part.Inventory.ChangeInventoryGroup(GroupID);
}
HasGroupChanged = true;
// Don't trigger the update here - otherwise some client issues occur when multiple updates are scheduled
// for the same object with very different properties. The caller must schedule the update.
//ScheduleGroupForFullUpdate();
}
public void TriggerScriptChangedEvent(Changed val)
{
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
parts[i].TriggerScriptChangedEvent(val);
}
///
/// Returns a count of the number of scripts in this groups parts.
///
public int ScriptCount()
{
int count = 0;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
count += parts[i].Inventory.ScriptCount();
return count;
}
///
/// A float the value is a representative execution time in milliseconds of all scripts in the link set.
///
public float ScriptExecutionTime()
{
IScriptModule[] engines = Scene.RequestModuleInterfaces();
if (engines.Length == 0) // No engine at all
return 0.0f;
try
{
float time = 0.0f;
// get all the scripts in all parts
SceneObjectPart[] parts = m_parts.GetArray();
List scripts = new();
for (int i = 0; i < parts.Length; i++)
{
IEntityInventory inv = parts[i].Inventory;
if (inv is not null)
scripts.AddRange(parts[i].Inventory.GetInventoryItems(InventoryType.LSL));
}
// extract the UUIDs
HashSet unique = new();
foreach (TaskInventoryItem script in scripts)
unique.Add(script.ItemID);
List ids = unique.ToList();
// Offer the list of script UUIDs to each engine found and accumulate the time
foreach (IScriptModule e in engines)
{
if (e is not null)
{
time += e.GetScriptExecutionTime(ids);
}
}
return time;
}
catch
{
return 0.0f;
}
}
public bool ScriptsMemory(out int memory)
{
memory = 0;
IScriptModule[] engines = Scene.RequestModuleInterfaces();
if (engines.Length == 0) // No engine at all
return false;
try
{
// get all the scripts in all parts
SceneObjectPart[] parts = m_parts.GetArray();
List scripts = new();
for (int i = 0; i < parts.Length; i++)
{
IEntityInventory inv = parts[i].Inventory;
if(inv is not null)
scripts.AddRange(inv.GetInventoryItems(InventoryType.LSL));
}
if (scripts.Count == 0)
return false;
// extract the UUIDs
HashSet unique = new();
foreach (TaskInventoryItem script in scripts)
unique.Add(script.ItemID);
List ids = unique.ToList();
// Offer the list of script UUIDs to each engine found and accumulate the memory
foreach (IScriptModule e in engines)
{
if (e is not null)
{
memory += e.GetScriptsMemory(ids);
}
}
return true;
}
catch
{
return false;
}
}
///
/// Returns a count of the number of running scripts in this groups parts.
///
public int RunningScriptCount()
{
int count = 0;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
count += parts[i].Inventory.RunningScriptCount();
return count;
}
///
/// Get a copy of the list of sitting avatars on all prims of this object.
///
///
/// This is sorted by the order in which avatars sat down. If an avatar stands up then all avatars that sat
/// down after it move one place down the list.
///
/// A list of the sitting avatars. Returns an empty list if there are no sitting avatars.
public List GetSittingAvatars()
{
lock (m_sittingAvatars)
return new List(m_sittingAvatars);
}
public bool HasSittingAvatar(UUID avatarID)
{
// locked O(n) :(
lock (m_sittingAvatars)
{
for(int i = 0; i < m_sittingAvatars.Count; ++i)
{
if(m_sittingAvatars[i].UUID.Equals(avatarID))
return true;
}
}
return false;
}
///
/// Gets the number of sitting avatars.
///
/// This applies to all sitting avatars whether there is a sit target set or not.
///
public int GetSittingAvatarsCount()
{
lock (m_sittingAvatars)
return m_sittingAvatars.Count;
}
public ScenePresence GetLinkSitingAvatar(int linknumber)
{
lock(m_parts)
linknumber -= (m_parts.Count + 1);
lock (m_sittingAvatars)
{
if (linknumber < m_sittingAvatars.Count && linknumber >= 0)
return m_sittingAvatars[linknumber];
}
return null;
}
public override string ToString()
{
return $"{Name} {UUID} ({AbsolutePosition})";
}
#region ISceneObject
public virtual ISceneObject CloneForNewScene()
{
SceneObjectGroup sog = Copy(false);
sog.IsDeleted = false;
return sog;
}
public virtual string ToXml2()
{
return SceneObjectSerializer.ToXml2Format(this);
}
public virtual string ExtraToXmlString()
{
return $"{FromItemID}";
}
public virtual void ExtraFromXmlString(string xmlstr)
{
if (string.IsNullOrEmpty(xmlstr))
{
FromItemID = UUID.Zero;
return;
}
int indx = xmlstr.IndexOf("");
if (indx < 0)
{
FromItemID = UUID.Zero;
return;
}
indx += 17;
if(indx >= xmlstr.Length)
{
FromItemID = UUID.Zero;
return;
}
int indx2 = xmlstr.IndexOf("", indx);
UUID uuid;
if (indx2 < 0)
_ = UUID.TryParse(xmlstr.AsSpan()[indx..], out uuid);
else
_ = UUID.TryParse(xmlstr.AsSpan()[indx..indx2], out uuid);
FromItemID = uuid;
}
public void ResetOwnerChangeFlag()
{
ForEachPart(delegate(SceneObjectPart part)
{
part.ResetOwnerChangeFlag();
});
InvalidateEffectivePerms();
}
private readonly Dictionary m_partsNameToLinkMap = new();
private string GetLinkNumber_lastname;
private int GetLinkNumber_lastnumber;
public int GetLinkNumber(string name)
{
if(string.IsNullOrEmpty(name) || name == "Object" || name == "Primitive")
return -1;
lock(m_partsNameToLinkMap)
{
if (name == GetLinkNumber_lastname)
return GetLinkNumber_lastnumber;
if (m_partsNameToLinkMap.Count == 0)
{
GetLinkNumber_lastname = string.Empty;
GetLinkNumber_lastnumber = -1;
SceneObjectPart[] parts = m_parts.GetArray();
for (int i = 0; i < parts.Length; i++)
{
string s = parts[i].Name;
if(string.IsNullOrEmpty(s) || s == "Object" || s == "Primitive")
continue;
if(m_partsNameToLinkMap.ContainsKey(s))
{
int ol = parts[i].LinkNum;
if(ol < m_partsNameToLinkMap[s])
m_partsNameToLinkMap[s] = ol;
}
else
m_partsNameToLinkMap[s] = parts[i].LinkNum;
}
}
if(m_partsNameToLinkMap.ContainsKey(name))
{
GetLinkNumber_lastname = name;
GetLinkNumber_lastnumber = m_partsNameToLinkMap[name];
return GetLinkNumber_lastnumber;
}
}
if(m_sittingAvatars.Count > 0)
{
int j = m_parts.Count + 1;
ScenePresence[] avs = m_sittingAvatars.ToArray();
for (int i = 0; i < avs.Length; i++, j++)
{
if (avs[i].Name == name)
{
GetLinkNumber_lastname = name;
GetLinkNumber_lastnumber = j;
return j;
}
}
}
return -1;
}
public void InvalidatePartsLinkMaps(bool all = true)
{
lock(m_partsNameToLinkMap)
{
if(all)
m_partsNameToLinkMap.Clear();
GetLinkNumber_lastname = string.Empty;
GetLinkNumber_lastnumber = -1;
}
}
public bool CollisionSoundThrottled(int collisionSoundType)
{
double time = m_lastCollisionSoundMS;
//m_lastCollisionSoundMS = Util.GetTimeStampMS();
//time = m_lastCollisionSoundMS - time;
double now = Util.GetTimeStampMS();
time = now - time;
switch (collisionSoundType)
{
case 0: // default sounds
case 2: // default sounds with volume set by script
if(time < 300.0)
return true;
break;
case 1: // selected sound
if(time < 200.0)
return true;
break;
default:
break;
}
m_lastCollisionSoundMS = now;
return false;
}
public bool GetOwnerName(out string FirstName, out string LastName)
{
if (RootPart is not null)
{
if(RootPart.OwnerID.Equals(RootPart.GroupID))
{
IGroupsModule groups = m_scene.RequestModuleInterface();
if (groups is not null)
{
GroupRecord grprec = groups.GetGroupRecord(RootPart.OwnerID);
if (grprec is not null)
{
FirstName = string.Empty;
LastName = grprec.GroupName;
return true;
}
}
}
else
return m_scene.UserManagementModule.GetUserName(RootPart.OwnerID, out FirstName, out LastName);
}
FirstName = string.Empty;
LastName = string.Empty;
return false;
}
#endregion
}
}