OpenSim.ini.example 51 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971972973974975976977978979980981982983984985986987988989990991992993994995996997998999100010011002100310041005100610071008100910101011101210131014101510161017101810191020102110221023102410251026102710281029103010311032103310341035103610371038103910401041104210431044104510461047104810491050105110521053105410551056105710581059106010611062106310641065106610671068106910701071107210731074107510761077107810791080108110821083108410851086108710881089109010911092
  1. ;; This is the main configuration file for OpenSimulator.
  2. ;; If it's named OpenSim.ini then it will be loaded by OpenSimulator.
  3. ;; If it's named OpenSim.ini.example then you will need to copy it to
  4. ;; OpenSim.ini first (if that file does not already exist)
  5. ;;
  6. ;; If you are copying, then once you have copied OpenSim.ini.example to
  7. ;; OpenSim.ini you will need to pick an architecture in the [Architecture]
  8. ;; section at the end of this file.
  9. ;;
  10. ;; The settings in this file are in the form "<key> = <value>". For example,
  11. ;; save_crashes = false in the [Startup] section below.
  12. ;;
  13. ;; All settings are initially commented out and the default value used, as
  14. ;; found in OpenSimDefaults.ini. To change a setting, first uncomment it by
  15. ;; deleting the initial semicolon (;) and then change the value. This will
  16. ;; override the value in OpenSimDefaults.ini
  17. ;;
  18. ;; If you want to find out what configuration OpenSimulator has finished with
  19. ;; once all the configuration files are loaded then type "config show" on the
  20. ;; region console command line.
  21. ;;
  22. ;;
  23. ;; NOTES FOR DEVELOPERS REGARDING THE FORMAT OF THIS FILE
  24. ;;
  25. ;; All leading white space is ignored, but preserved.
  26. ;;
  27. ;; Double semicolons denote a text comment
  28. ;;
  29. ;; ;# denotes a configuration directive description
  30. ;; formatted as:
  31. ;; {option} {depends on} {question to ask} {choices} default value
  32. ;; Any text comments following the declaration, up to the next blank line.
  33. ;; will be copied to the generated file (NOTE: generation is not yet
  34. ;; implemented)
  35. ;;
  36. ;; A * in the choices list will allow an empty entry.
  37. ;; An empty question will set the default if the dependencies are
  38. ;; satisfied.
  39. ;;
  40. ;; ; denotes a commented out option.
  41. ;; Any options added to OpenSim.ini.example should be initially commented
  42. ;; out.
  43. [Startup]
  44. ;# {ConsolePrompt} {} {ConsolePrompt} {} "Region (\R) "
  45. ;; Console prompt
  46. ;; Certain special characters can be used to customize the prompt
  47. ;; Currently, these are
  48. ;; \R - substitute region name
  49. ;; \\ - substitute \
  50. ; ConsolePrompt = "Region (\R) "
  51. ;# {save_crashes} {} {Save crashes to disk?} {true false} false
  52. ;; Set this to true if you want to log crashes to disk
  53. ;; this can be useful when submitting bug reports.
  54. ;; However, this will only log crashes within OpenSimulator that cause the
  55. ;; entire program to exit
  56. ;; It will not log crashes caused by virtual machine failures, which
  57. ;; includes mono and ODE failures.
  58. ;; You will need to capture these native stack traces by recording the
  59. ;; session log itself.
  60. ; save_crashes = false
  61. ;# {crash_dir} {save_crashes:true} {Directory to save crashes to?} {} crashes
  62. ;; Directory to save crashes to if above is enabled
  63. ;; (default is /opensimdir/crashes/*.txt or C:\opensim\crashes\*.txt)
  64. ; crash_dir = "crashes"
  65. ;# {PIDFile} {} {Path to PID file?} {}
  66. ;; Place to create a PID file
  67. ; PIDFile = "/tmp/OpenSim.exe.pid"
  68. ;# {region_info_source} {} {Where to load region from?} {filesystem web} filesystem
  69. ;; Determine where OpenSimulator looks for the files which tell it
  70. ;; which regions to server
  71. ;; Default is "filesystem"
  72. ; region_info_source = "filesystem"
  73. ; region_info_source = "web"
  74. ;# {regionload_regionsdir} {region_info_source} {Location of file?} {} Regions
  75. ;; Determines where the region XML files are stored if you are loading
  76. ;; these from the filesystem.
  77. ;; Defaults to bin/Regions in your OpenSimulator installation directory
  78. ; regionload_regionsdir="C:\somewhere\xmlfiles\"
  79. ;# {regionload_webserver_url} {region_info_source} {URL to load region from?} {}
  80. ;; Determines the page from which regions xml is retrieved if you are
  81. ;; loading these from the web.
  82. ;; The XML here has the same format as it does on the filesystem
  83. ;; (including the <Root> tag), except that everything is also enclosed
  84. ;; in a <Regions> tag.
  85. ; regionload_webserver_url = "http://example.com/regions.xml";
  86. ;# {allow_regionless} {} {Allow simulator to start up with no regions configured.} {true false} false
  87. ;; Allow the simulator to start up if there are no region configuration available
  88. ;; from the selected region_info_source.
  89. ; allow_regionless = false
  90. ;# {MaxPrimUndos} {} {Maximum number of undos avialable for position, rotation and scale changes of each prim} {} 20
  91. ;; Increasing the number of undos available number will increase memory usage.
  92. MaxPrimUndos = 20
  93. ;# {NonPhysicalPrimMin} {} {Minimum size of nonphysical prims?} {} 0.001
  94. ;; Minimum size for non-physical prims. Affects resizing of existing
  95. ;; prims. This can be overriden in the region config file (as
  96. ;; NonPhysicalPrimMin!).
  97. ; NonPhysicalPrimMin = 0.001
  98. ;# {NonPhysicalPrimMax} {} {Maximum size of nonphysical prims?} {} 256
  99. ;; Maximum size for non-physical prims. Affects resizing of existing
  100. ;; prims. This can be overriden in the region config file (as
  101. ;; NonPhysicalPrimMax!).
  102. ; NonPhysicalPrimMax = 256
  103. ;# {PhysicalPrimMin} {} {Minimum size of physical prims?} {} 10
  104. ;; Maximum size where a prim can be physical. Affects resizing of
  105. ;; existing prims. This can be overriden in the region config file.
  106. ; PhysicalPrimMin = 0.01
  107. ;# {PhysicalPrimMax} {} {Maximum size of physical prims?} {} 10
  108. ;; Maximum size where a prim can be physical. Affects resizing of
  109. ;; existing prims. This can be overriden in the region config file.
  110. ; PhysicalPrimMax = 10
  111. ;# {ClampPrimSize} {} {Clamp viewer rezzed prims to max sizes?} {true false} false
  112. ;; If a viewer attempts to rez a prim larger than the non-physical or
  113. ;; physical prim max, clamp the dimensions to the appropriate maximum
  114. ;; This can be overriden in the region config file.
  115. ; ClampPrimSize = false
  116. ;# {LinksetPrims} {} {Max prims an object will hold?} {} 0
  117. ;; Maximum number of prims allowable in a linkset. Affects creating new
  118. ;; linksets. Ignored if less than or equal to zero.
  119. ;; This can be overriden in the region config file.
  120. ; LinksetPrims = 0
  121. ;# {AllowScriptCrossing} {} {Allow scripts to cross into this region} {true false} true
  122. ;; Allow scripts to keep running when they cross region boundaries, rather
  123. ;; than being restarted. State is reloaded on the destination region.
  124. ;; This only applies when crossing to a region running in a different
  125. ;; simulator.
  126. ;; For crossings where the regions are on the same simulator the script is
  127. ;; always kept running.
  128. ; AllowScriptCrossing = true
  129. ;# {TrustBinaries} {AllowScriptCrossing:true} {Accept compiled binary script code? (DANGEROUS!)} {true false} false
  130. ;; Allow compiled script binary code to cross region boundaries.
  131. ;; If you set this to "true", any region that can teleport to you can
  132. ;; inject ARBITRARY BINARY CODE into your system. Use at your own risk.
  133. ;; YOU HAVE BEEN WARNED!!!
  134. ; TrustBinaries = false
  135. ;# {CombineContiguousRegions} {} {Create megaregions where possible? (Do not use with existing content!)} {true false} false
  136. ;; Combine all contiguous regions into one large megaregion
  137. ;; Order your regions from South to North, West to East in your regions.ini
  138. ;; and then set this to true
  139. ;; Warning! Don't use this with regions that have existing content!,
  140. ;; This will likely break them
  141. ; CombineContiguousRegions = false
  142. ;# {InworldRestartShutsDown} {} {Shutdown instance on region restart?} {true false} false
  143. ;; If you have only one region in an instance, or to avoid the many bugs
  144. ;; that you can trigger in modules by restarting a region, set this to
  145. ;; true to make the entire instance exit instead of restarting the region.
  146. ;; This is meant to be used on systems where some external system like
  147. ;; Monit will restart any instance that exits, thereby making the shutdown
  148. ;; into a restart.
  149. ; InworldRestartShutsDown = false
  150. ;; Persistence of changed objects happens during regular sweeps. The
  151. ;; following control that behaviour to prevent frequently changing objects
  152. ;; from heavily loading the region data store.
  153. ;; If both of these values are set to zero then persistence of all changed
  154. ;; objects will happen on every sweep.
  155. ;# {MinimumTimeBeforePersistenceConsidered} {} {Time before un-changed object may be persisted} {} 60
  156. ;; Objects will be considered for persistance in the next sweep when they
  157. ;; have not changed for this number of seconds.
  158. ; MinimumTimeBeforePersistenceConsidered = 60
  159. ;# {MaximumTimeBeforePersistenceConsidered} {} {Time before changed objects may be persisted?} {} 600
  160. ;; Objects will always be considered for persistance in the next sweep
  161. ;; if the first change occurred this number of seconds ago.
  162. ; MaximumTimeBeforePersistenceConsidered = 600
  163. ;# {physical_prim} {} {Allow prims to be physical?} {true false} true
  164. ;; if you would like to allow prims to be physical and move by physics
  165. ;; with the physical checkbox in the client set this to true.
  166. ; physical_prim = true
  167. ;; Select a mesher here.
  168. ;;
  169. ;; Meshmerizer properly handles complex prims by using triangle meshes.
  170. ;; Note that only the ODE physics engine currently deals with meshed
  171. ;; prims in a satisfactory way.
  172. ;# {meshing} {} {Select mesher} {Meshmerizer ZeroMesher} Meshmerizer
  173. ;; ZeroMesher is faster but leaves the physics engine to model the mesh
  174. ;; using the basic shapes that it supports.
  175. ;; Usually this is only a box.
  176. ;; Default is Meshmerizer
  177. ; meshing = Meshmerizer
  178. ; meshing = ZeroMesher
  179. ;; Choose one of the physics engines below
  180. ;# {physics} {} {Select physics engine} {OpenDynamicsEngine BulletSim basicphysics POS} OpenDynamicsEngine
  181. ;; OpenDynamicsEngine is by some distance the most developed physics engine
  182. ;; BulletSim is experimental and in active development.
  183. ;; basicphysics effectively does not model physics at all, making all
  184. ;; objects phantom.
  185. ;; Default is OpenDynamicsEngine
  186. ; physics = OpenDynamicsEngine
  187. ; physics = BulletSim
  188. ; physics = basicphysics
  189. ; physics = POS
  190. ;# {DefaultScriptEngine} {} {Default script engine} {XEngine} XEngine
  191. ;; Default script engine to use. Currently, we only have XEngine
  192. ; DefaultScriptEngine = "XEngine"
  193. ;# {HttpProxy} {} {Proxy URL for llHTTPRequest and dynamic texture loading} {} http://proxy.com:8080
  194. ;; Http proxy setting for llHTTPRequest and dynamic texture loading, if
  195. ;; required
  196. ; HttpProxy = "http://proxy.com:8080"
  197. ;# {HttpProxyExceptions} {HttpProxy} {Set of regular expressions defining URL that should not be proxied} {}
  198. ;; If you're using HttpProxy, then you can set HttpProxyExceptions to a
  199. ;; list of regular expressions for URLs that you don't want to go through
  200. ;; the proxy.
  201. ;; For example, servers inside your firewall.
  202. ;; Separate patterns with a ';'
  203. ; HttpProxyExceptions = ".mydomain.com;localhost"
  204. ;# {emailmodule} {} {Provide llEmail and llGetNextEmail functionality? (requires SMTP server)} {true false} false
  205. ;; The email module requires some configuration. It needs an SMTP
  206. ;; server to send mail through.
  207. ; emailmodule = DefaultEmailModule
  208. ;# {SpawnPointRouting} {} {Set routing method for Telehub Spawnpoints} {closest random sequence} closest
  209. ;; SpawnPointRouting adjusts the landing for incoming avatars.
  210. ;; "closest" will place the avatar at the SpawnPoint located in the closest
  211. ;; available spot to the destination (typically map click/landmark).
  212. ;; "random" will place the avatar on a randomly selected spawnpoint;
  213. ;; "sequence" will place the avatar on the next sequential SpawnPoint
  214. ; SpawnPointRouting = closest
  215. ;# {TelehubAllowLandmark} {} {Allow users with landmarks to override telehub routing} {true false} false
  216. ;; TelehubAllowLandmark allows users with landmarks to override telehub
  217. ;; routing and land at the landmark coordinates when set to true
  218. ;; default is false
  219. ; TelehubAllowLandmark = false
  220. [AccessControl]
  221. ;# {AllowedClients} {} {Bar (|) separated list of allowed clients} {}
  222. ;; Bar (|) separated list of viewers which may gain access to the regions.
  223. ;; One can use a substring of the viewer name to enable only certain
  224. ;; versions
  225. ;; Example: Agent uses the viewer "Imprudence 1.3.2.0"
  226. ;; - "Imprudence" has access
  227. ;; - "Imprudence 1.3" has access
  228. ;; - "Imprudence 1.3.1" has no access
  229. ; AllowedClients =
  230. ;# {BannedClients} {} {Bar (|) separated list of banned clients} {}
  231. ;; Bar (|) separated list of viewers which may not gain access to the regions.
  232. ;; One can use a Substring of the viewer name to disable only certain
  233. ;; versions
  234. ;; Example: Agent uses the viewer "Imprudence 1.3.2.0"
  235. ;; - "Imprudence" has no access
  236. ;; - "Imprudence 1.3" has no access
  237. ;; - "Imprudence 1.3.1" has access
  238. ; BannedClients =
  239. [Map]
  240. ;# {GenerateMaptiles} {} {Generate map tiles?} {true false} true
  241. ;; Map tile options.
  242. ;; If true, then maptiles are generated using the MapImageModule below.
  243. ;; If false then the texture referenced by MaptileStaticUUID is used instead, which can also be overriden
  244. ;; in individual region config file(s). If you do not want to upload map tiles at all, then you will need
  245. ;; both to set this to false and comment out the [Modules] MapImageServiceModule setting in config-include/
  246. ; GenerateMaptiles = true
  247. ;# {MapImageModule} {} {The map image module to use} {MapImageModule Warp3DImageModule} MapImageModule
  248. ;; The module to use in order to generate map images.
  249. ;; MapImageModule is the default. Warp3DImageModule is an alternative experimental module that can
  250. ;; generate better images.
  251. ;MapImageModule = "MapImageModule"
  252. ;# {MaptileRefresh} {GenerateMaptiles} {Maptile refresh period?} {} 0
  253. ;; If desired, a running region can update the map tiles periodically
  254. ;; to reflect building activity. This names no sense of you don't have
  255. ;; prims on maptiles. Value is in seconds.
  256. ; MaptileRefresh = 0
  257. ;# {MaptileStaticUUID} {} {Asset ID for static map texture} {} 00000000-0000-0000-0000-000000000000
  258. ;; If not generating maptiles, use this static texture asset ID
  259. ; MaptileStaticUUID = "00000000-0000-0000-0000-000000000000"
  260. ;# {TextureOnMapTile} {} {Use terrain textures for map tiles?} {true false} true
  261. ;; Use terrain texture for maptiles if true, use shaded green if false
  262. ; TextureOnMapTile = true
  263. ;# {DrawPrimOnMapTile} {} {Draw prim shapes on map tiles?} {true false} false
  264. ;; Draw objects on maptile. This step might take a long time if you've
  265. ;; got a large number of objects, so you can turn it off here if you'd like.
  266. ; DrawPrimOnMapTile = true
  267. ;# {TexturePrims} {} {Texture prims on map tiles?} {true false} true
  268. ;; Texture the faces of the prims that are rendered on the map tiles.
  269. ; TexturePrims = true
  270. ;# {TexturePrimSize} {} {Size of prims to texture faces?} {} 48
  271. ;; Only texture prims that have a diagonal size greater than this number
  272. ; TexturePrimSize = 48
  273. ;# {RenderMeshes} {} {Render meshes and sculpties on map tiles?} {true false} false
  274. ;; Attempt to render meshes and sculpties on the map
  275. ; RenderMeshes = false;
  276. [Permissions]
  277. ;# {permissionmodules} {} {Permission modules to use (may specify multiple modules, separated by comma} {} DefaultPermissionsModule
  278. ;; Permission modules to use, separated by comma.
  279. ;; Possible modules are DefaultPermissionsModule, PrimLimitsModule
  280. ; permissionmodules = DefaultPermissionsModule
  281. ;# {serverside_object_permissions} {permissionmodules:DefaultPermissionsModule} {Activate permission handling by the sim?} {true false} true
  282. ;; These are the parameters for the default permissions module
  283. ;;
  284. ;; If set to false, then, in theory, the server never carries out
  285. ;; permission checks (allowing anybody to copy
  286. ;; any item, etc. This may not yet be implemented uniformally.
  287. ;; If set to true, then all permissions checks are carried out
  288. ; serverside_object_permissions = true
  289. ;# {allow_grid_gods} {} {Allow grid gods?} {true false} false
  290. ;; This allows users with a UserLevel of 200 or more to assume god
  291. ;; powers in the regions in this simulator.
  292. ; allow_grid_gods = false
  293. ;; This allows some control over permissions
  294. ;; please note that this still doesn't duplicate SL, and is not intended to
  295. ;# {region_owner_is_god} {} {Allow region owner gods} {true false} true
  296. ;; Allow region owners to assume god powers in their regions
  297. ; region_owner_is_god = true
  298. ;# {region_manager_is_god} {} {Allow region manager gods} {true false} false
  299. ;; Allow region managers to assume god powers in regions they manage
  300. ; region_manager_is_god = false
  301. ;# {parcel_owner_is_god} {} {Allow parcel owner gods} {true false} true
  302. ;; Allow parcel owners to assume god powers in their parcels
  303. ; parcel_owner_is_god = true
  304. ;# {simple_build_permissions} {} {Allow building in parcel by access list (no groups)} {true false} false
  305. ;; More control over permissions
  306. ;; This is definitely not SL!
  307. ;; Provides a simple control for land owners to give build rights to
  308. ;; specific avatars in publicly accessible parcels that disallow object
  309. ;; creation in general.
  310. ;; Owners specific avatars by adding them to the Access List of the parcel
  311. ;; without having to use the Groups feature
  312. ; simple_build_permissions = false
  313. [Estates]
  314. ; If these values are commented out then the user will be asked for estate details when required (this is the normal case).
  315. ; If these values are uncommented then they will be used to create a default estate as necessary.
  316. ; New regions will be automatically assigned to that default estate.
  317. ;# {DefaultEstateName} {} {Default name for estate?} {} My Estate
  318. ;; Name for the default estate
  319. ; DefaultEstateName = My Estate
  320. ;# {DefaultEstateOwnerName} {} {Default estate owner name?} {} FirstName LastName
  321. ;; Name for default estate owner
  322. ; DefaultEstateOwnerName = FirstName LastName
  323. ; ** Standalone Estate Settings **
  324. ; The following parameters will only be used on a standalone system to
  325. ; create an estate owner that does not already exist
  326. ;# {DefaultEstateOwnerUUID} {} {Default estate owner UUID?} {} 00000000-0000-0000-0000-000000000000
  327. ;; If DefaultEstateOwnerUUID is left at UUID.Zero (as below) then a random
  328. ;; UUID will be assigned. This is normally what you want
  329. ; DefaultEstateOwnerUUID = 00000000-0000-0000-0000-000000000000
  330. ;# {DefaultEstateOwnerEMail} {} {Default estate owner email?} {}
  331. ;; Email address for the default estate owner
  332. ; DefaultEstateOwnerEMail = [email protected]
  333. ;# {DefaultEstateOwnerPassword} {} {Default estate owner password} {}
  334. ;; Password for the default estate owner
  335. ; DefaultEstateOwnerPassword = password
  336. [SMTP]
  337. ;; The SMTP server enabled the email module to send email to external
  338. ;; destinations.
  339. ;# {enabled} {[Startup]emailmodule:DefaultEmailModule} {Enable SMTP service?} {true false} false
  340. ;; Enable sending email via SMTP
  341. ; enabled = false
  342. ;# {internal_object_host} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Host name to treat as internal (object to object) email?} {} lsl.opensim.local
  343. ; internal_object_host = lsl.opensim.local
  344. ;# {host_domain_header_from} {[Startup]emailmodule:DefaultEmailModule enabled:true} {From address to use in the sent email header?} {} 127.0.0.1
  345. ; host_domain_header_from = "127.0.0.1"
  346. ;# {email_pause_time} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Period in seconds to delay after an email is sent.} {} 20
  347. ; email_pause_time = 20
  348. ;# {email_max_size} {[Startup]emailmodule:DefaultEmailModule enabled:true} {Maximum total size of email in bytes.} {} 4096
  349. ; email_max_size = 4096
  350. ;# {SMTP_SERVER_HOSTNAME} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {} 127.0.0.1
  351. ; SMTP_SERVER_HOSTNAME = "127.0.0.1"
  352. ;# {SMTP_SERVER_PORT} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server name?} {SMTP server port?} {} 25
  353. ; SMTP_SERVER_PORT = 25
  354. ;# {SMTP_SERVER_LOGIN} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server user name?} {}
  355. ; SMTP_SERVER_LOGIN = ""
  356. ;# {SMTP_SERVER_PASSWORD} {[Startup]emailmodule:DefaultEmailModule enabled:true} {SMTP server password} {}
  357. ; SMTP_SERVER_PASSWORD = ""
  358. [Network]
  359. ;# {ConsoleUser} {} {User name for console account} {}
  360. ;; Configure the remote console user here. This will not actually be used
  361. ;; unless you use -console=rest at startup.
  362. ; ConsoleUser = "Test"
  363. ;# {ConsolePass} {} {Password for console account} {}
  364. ; ConsolePass = "secret"
  365. ;# {console_port} {} {Port for console connections} {} 0
  366. ; console_port = 0
  367. ;# {http_listener_port} {} {TCP Port for this simulator to listen on? (This must be unique to the simulator!)} {} 9000
  368. ;; Simulator HTTP port. This is not the region port, but the port the
  369. ;; entire simulator listens on. This port uses the TCP protocol, while
  370. ;; the region ports use UDP.
  371. ; http_listener_port = 9000
  372. ;# {ExternalHostNameForLSL} {} {Hostname to use for HTTP-IN URLs. This should be reachable from the internet.} {}
  373. ;; Hostname to use in llRequestURL/llRequestSecureURL
  374. ;; if not defined - default machine name is being used
  375. ;; (on Windows this mean NETBIOS name - useably only inside local network)
  376. ; ExternalHostNameForLSL = "127.0.0.1"
  377. ;# {shard} {} {Name to use for X-Secondlife-Shard header? (press enter if unsure)} {} OpenSim
  378. ;; What is reported as the "X-Secondlife-Shard"
  379. ;; Defaults to the user server url if not set
  380. ;; The old default is "OpenSim", set here for compatibility
  381. ;; The below is not commented for compatibility.
  382. shard = "OpenSim"
  383. ;# {user_agent} {} {User agent to report to web servers?} {} OpenSim LSL (Mozilla Compatible)
  384. ;; What is reported as the "User-Agent" when using llHTTPRequest
  385. ;; Defaults to not sent if not set here. See the notes section in the wiki
  386. ;; at http://wiki.secondlife.com/wiki/LlHTTPRequest for comments on adding
  387. ;; " (Mozilla Compatible)" to the text where there are problems with a
  388. ;; web server
  389. ; user_agent = "OpenSim LSL (Mozilla Compatible)"
  390. [XMLRPC]
  391. ;# {XmlRpcRouterModule} {} {Module used to route incoming llRemoteData calls} {XmlRpcRouterModule XmlRpcGridRouterModule} XmlRpcRouterModule
  392. ;; If enabled and set to XmlRpcRouterModule, this will post an event,
  393. ;; "xmlrpc_uri(string)" to the script concurrently with the first
  394. ;; remote_data event. This will contain the fully qualified URI an
  395. ;; external site needs to use to send XMLRPC requests to that script
  396. ;;
  397. ;; If enabled and set to XmlRpcGridRouterModule, newly created channels
  398. ;; will be registered with an external service via a configured uri
  399. ;XmlRpcRouterModule = "XmlRpcRouterModule"
  400. ;# {XmlRpcPort} {} {Port for incoming llRemoteData xmlrpc calls} {} 20800
  401. ;XmlRpcPort = 20800
  402. ;# {XmlRpcHubURI} {XmlRpcRouterModule} {URI for external service used to register xmlrpc channels created in the simulator. This depends on XmlRpcRouterModule being set to XmlRpcGridRouterModule} {} http://example.com
  403. ;; If XmlRpcRouterModule is set to XmlRpcGridRouterModule, the simulator
  404. ;; will use this address to register xmlrpc channels on the external
  405. ;; service
  406. ; XmlRpcHubURI = http://example.com
  407. [ClientStack.LindenUDP]
  408. ;; See OpensSimDefaults.ini for the throttle options. You can copy the
  409. ;; relevant sections and override them here.
  410. ;; DO NOT MODIFY OpenSimDefaults.ini, as your changes would be lost
  411. ;; with the next update!
  412. ;# {DisableFacelights} {} {Stop facelights from working?} {true false} false
  413. ;; Quash and remove any light properties from attachments not on the
  414. ;; hands. This allows flashlights and lanterns to function, but kills
  415. ;; silly vanity "Facelights" dead. Sorry, head mounted miner's lamps
  416. ;; will also be affected.
  417. ;; This is especially important in artistic builds that depend on lights
  418. ;; on the build for their appearance, since facelights will cause the
  419. ;; building's lights to possibly not be rendered.
  420. ; DisableFacelights = "false"
  421. [ClientStack.LindenCaps]
  422. ;; For the long list of capabilities, see OpenSimDefaults.ini
  423. ;; Here are the few ones you may want to change. Possible values
  424. ;; are:
  425. ;; "" -- empty, capability disabled
  426. ;; "localhost" -- capability enabled and served by the simulator
  427. ;; "<url>" -- capability enabled and served by some other server
  428. ;;
  429. ; These are enabled by default to localhost. Change if you see fit.
  430. Cap_GetTexture = "localhost"
  431. Cap_GetMesh = "localhost"
  432. Cap_AvatarPickerSearch = "localhost"
  433. ; This is disabled by default. Change if you see fit. Note that
  434. ; serving this cap from the simulators may lead to poor performace.
  435. Cap_WebFetchInventoryDescendents = ""
  436. [SimulatorFeatures]
  437. ;# {MapImageServerURI} {} {URL for the map server} {}
  438. ; Experimental new information sent in SimulatorFeatures cap for Kokua
  439. ; viewers
  440. ; meant to override the MapImage and search server url given at login, and varying
  441. ; on a sim-basis.
  442. ; Viewers that don't understand it, will ignore it
  443. ;MapImageServerURI = "http://127.0.0.1:9000/"
  444. ;# {SearchServerURI} {} {URL of the search server} {}
  445. ;SearchServerURI = "http://127.0.0.1:9000/"
  446. [Chat]
  447. ;# {whisper_distance} {} {Distance at which a whisper is heard, in meters?} {} 10
  448. ;; Distance in meters that whispers should travel.
  449. ; whisper_distance = 10
  450. ;# {say_distance} {} {Distance at which normal chat is heard, in meters?} {} 20
  451. ;; Distance in meters that ordinary chat should travel.
  452. ; say_distance = 20
  453. ;# {shout_distance} {} {Distance at which a shout is heard, in meters?} {} 100
  454. ;; Distance in meters that shouts should travel.
  455. ; shout_distance = 100
  456. [EntityTransfer]
  457. ;# {DisableInterRegionTeleportCancellation} {} {Determine whether the cancel button is shown at all during teleports.} {false true} false
  458. ;; This option exists because cancelling at certain points can result in an unuseable session (frozen avatar, etc.)
  459. ;; Disabling cancellation can be okay in small closed grids where all teleports are highly likely to suceed.
  460. ;DisableInterRegionTeleportCancellation = false
  461. [Messaging]
  462. ;# {OfflineMessageModule} {} {Module to use for offline message storage} {OfflineMessageModule "Offline Message Module V2" *}
  463. ;; Module to handle offline messaging. The core module requires an external
  464. ;; web service to do this. See OpenSim wiki.
  465. ; OfflineMessageModule = OfflineMessageModule
  466. ;; Or, alternatively, use this one, which works for both standalones and grids
  467. ; OfflineMessageModule = "Offline Message Module V2"
  468. ;# {OfflineMessageURL} {OfflineMessageModule:OfflineMessageModule Offline Message Module V2:Offline Message Module V2} {URL of offline messaging service} {}
  469. ;; URL of web service for offline message storage. Leave it commented if your service is local to the sim.
  470. ; OfflineMessageURL = http://yourserver/Offline.php or http://yourrobustserver:8003
  471. ;# {StorageProvider} {Offline Message Module V2:Offline Message Module V2} {DLL that provides the storage interface} {OpenSim.Data.MySQL.dll}
  472. ;; For standalones, this is the storage dll.
  473. ; StorageProvider = OpenSim.Data.MySQL.dll
  474. ;# {MuteListModule} {OfflineMessageModule:OfflineMessageModule} {} {} MuteListModule
  475. ;; Mute list handler (not yet implemented). MUST BE SET to allow offline
  476. ;; messages to work
  477. ; MuteListModule = MuteListModule
  478. ;# {MuteListURL} {OfflineMessageModule:OfflineMessageModule} {} {} http://yourserver/Mute.php
  479. ;; URL of the web service that serves mute lists. Not currently used, but
  480. ;; must be set to allow offline messaging to work.
  481. ; MuteListURL = http://yourserver/Mute.php
  482. ;; Control whether group invites and notices are stored for offline users.
  483. ;; Default is true.
  484. ;; This applies to both core groups module.
  485. ; ForwardOfflineGroupMessages = true
  486. [ODEPhysicsSettings]
  487. ;# {mesh_sculpted_prim} {[Startup]physics:OpenDynamicsEngine} {Mesh sculpties so they collide as they look?} {true false} true
  488. ;; Do we want to mesh sculpted prim to collide like they look?
  489. ;; If you are seeing sculpt texture decode problems
  490. ;; (messages such as "Decoded image with unhandled number of components: 0 shortly followed by a physcs exception")
  491. ;; then you might want to try setting this to false.
  492. ; mesh_sculpted_prim = true
  493. ;# {use_NINJA_physics_joints} {[Startup]physics:OpenDynamicsEngine} {Use jointed (NINJA) physics?} {true false} false
  494. ;; If you would like physics joints to be enabled through a special naming
  495. ;; convention in the client, set this to true.
  496. ;; (see NINJA Physics, http://opensimulator.org/wiki/NINJA_Physics)
  497. ; use_NINJA_physics_joints = false
  498. [RemoteAdmin]
  499. ;; This is the remote admin module, which uses XMLRPC requests to
  500. ;; manage regions from a web interface.
  501. ;# {enabled} {} {Enable the remote admin interface?} {true false} false
  502. ; enabled = false
  503. ;# {port} {enabled:true} {Port to use for the remote admin interface? (0 = default)} {} 0
  504. ;; Set this to a nonzero value to have remote admin use a different port
  505. ; port = 0
  506. ;# {access_password} {enabled:true} {Password for the remote admin interface} {}
  507. ;; This password is required to make any XMLRPC call (should be set as
  508. ;; the "password" parameter)
  509. ; access_password = ""
  510. ;# {access_ip_addresses} {enabled:true} {List the IP addresses allowed to call RemoteAdmin?} {}
  511. ;; List the IP addresses allowed to call RemoteAdmin
  512. ;; If access_ip_addresses isn't set, then all IP addresses can access RemoteAdmin.
  513. ;; access_ip_addresses = 0.0.0.0, 0.0.0.0 ...
  514. ; access_ip_addresses =
  515. ;# {create_region_enable_voice} {enabled:true} {Enable voice for newly created regions?} {true false} false
  516. ;; set this variable to true if you want the create_region XmlRpc
  517. ;; call to unconditionally enable voice on all parcels for a newly
  518. ;; created region
  519. ; create_region_enable_voice = false
  520. ;# {create_region_public} {enabled:true} {Make newly created regions public?} {true false} false
  521. ;; set this variable to false if you want the create_region XmlRpc
  522. ;; call to create all regions as private per default (can be
  523. ;; overridden in the XmlRpc call)
  524. ; create_region_public = false
  525. ;# {enabled_methods} {enabled:true} {List of methods to allow, separated by |} {} all
  526. ;; enable only those methods you deem to be appropriate using a | delimited
  527. ;; whitelist.
  528. ;; For example:
  529. ;; enabled_methods = admin_broadcast|admin_save_oar|admin_save_xml
  530. ;; if this parameter is not specified but enabled = true, all methods
  531. ;; will be available
  532. ; enabled_methods = all
  533. ;; specify the default appearance for an avatar created through the remote
  534. ;; admin interface
  535. ;; This will only take effect is the file specified by the
  536. ;; default_appearance setting below exists
  537. ; default_male = Default Male
  538. ; default_female = Default Female
  539. ;; Update appearance copies inventory items and wearables of default
  540. ;; avatars. if this value is false, just worn assets are copied to the
  541. ;; Clothes folder; if true, all Clothes and Bodyparts subfolders are copied.
  542. ;; The receiver will wear the same items the default avatar did wear.
  543. ; copy_folders = false
  544. ;; Path to default appearance XML file that specifies the look of the
  545. ;; default avatars
  546. ; default_appearance = default_appearance.xml
  547. [Wind]
  548. ;# {enabled} {} {Enable wind module?} {true false} true
  549. ;; Enables the wind module.
  550. ; enabled = true
  551. ;# {wind_update_rate} {enabled:true} {Wind update rate in frames?} {} 150
  552. ;; How often should wind be updated, as a function of world frames.
  553. ;; Approximately 50 frames a second
  554. ; wind_update_rate = 150
  555. ;; The Default Wind Plugin to load
  556. ; wind_plugin = SimpleRandomWind
  557. ;; These settings are specific to the ConfigurableWind plugin
  558. ;; To use ConfigurableWind as the default, simply change wind_plugin
  559. ;; to ConfigurableWind and uncomment the following.
  560. ; avg_strength = 5.0
  561. ; avg_direction = 0.0
  562. ; var_strength = 5.0
  563. ; var_direction = 30.0
  564. ; rate_change = 1.0
  565. ;# {strength} {enabled:true wind_plugin:SimpleRandomWind} {Wind strength?} {} 1.0
  566. ;; This setting is specific to the SimpleRandomWind plugin
  567. ;; Adjusts wind strength. 0.0 = no wind, 1.0 = normal wind.
  568. ; strength = 1.0
  569. [LightShare]
  570. ;# {enable_windlight} {} {Enable LightShare technology?} {true false} false
  571. ;; This enables the transmission of Windlight scenes to supporting clients,
  572. ;; such as the Meta7 viewer.
  573. ;; It has no ill effect on viewers which do not support server-side
  574. ;; windlight settings.
  575. ; enable_windlight = false
  576. [Materials]
  577. ;# {enable_materials} {} {Enable Materials support?} {true false} true
  578. ;; This enables the use of Materials.
  579. ; enable_materials = true
  580. [DataSnapshot]
  581. ;# {index_sims} {} {Enable data snapshotting (search)?} {true false} false
  582. ;; The following set of configs pertains to search.
  583. ;; Set index_sims to true to enable search engines to index your
  584. ;; searchable data.
  585. ;; If false, no data will be exposed, DataSnapshot module will be off,
  586. ;; and you can ignore the rest of these search-related configs.
  587. ; index_sims = false
  588. ;# {data_exposure} {index_sims:true} {How much data should be exposed?} {minimum all} minimum
  589. ;; The variable data_exposure controls what the regions expose:
  590. ;; minimum: exposes only things explicitly marked for search
  591. ;; all: exposes everything
  592. ; data_exposure = minimum
  593. ;# {gridname} {index_sims:true} {Enter the name fo your grid} {} OSGrid
  594. ;; If search is on, change this to your grid name; will be ignored for
  595. ;; standalones
  596. ; gridname = "OSGrid"
  597. ;# {default_snapshot_period} {index_sims:true} {Period between data snapshots?} {} 1200
  598. ;; Period between data snapshots, in seconds. 20 minutes, for starters,
  599. ;; so that you see the initial changes fast.
  600. ;; Later, you may want to increase this to 3600 (1 hour) or more
  601. ; default_snapshot_period = 1200
  602. ;; This will be created in bin, if it doesn't exist already. It will hold
  603. ;; the data snapshots.
  604. ; snapshot_cache_directory = "DataSnapshot"
  605. ;# {data_services} {index_sims:true} {Data service URLs to register with?} {} http://metaverseink.com/cgi-bin/register.py
  606. ; This semicolon-separated string serves to notify specific data services
  607. ; about the existence of this sim. Uncomment if you want to index your
  608. ; data with this and/or other search providers.
  609. ; data_services="http://metaverseink.com/cgi-bin/register.py"
  610. [Economy]
  611. ;# {SellEnabled} {} {Enable selling for 0?} {true false} true
  612. ; The default economy module only implements just enough to allow free actions (transfer of objects, etc).
  613. ; There is no intention to implement anything further in core OpenSimulator.
  614. ; This functionality has to be provided by third party modules.
  615. ;; Enables selling things for $0. Default is true.
  616. ; SellEnabled = true
  617. ;# {PriceUpload} {} {Price for uploading?} {} 0
  618. ;; Money Unit fee to upload textures, animations etc. Default is 0.
  619. ; PriceUpload = 0
  620. ;# {PriceGroupCreate} {} {Fee for group creation} {} 0
  621. ;; Money Unit fee to create groups. Default is 0.
  622. ; PriceGroupCreate = 0
  623. [XEngine]
  624. ;# {Enabled} {} {Enable the XEngine scripting engine?} {true false} true
  625. ;; Enable this engine in this OpenSim instance
  626. ; Enabled = true
  627. ;; How many threads to keep alive even if nothing is happening
  628. ; MinThreads = 2
  629. ;; How many threads to start at maximum load
  630. ; MaxThreads = 100
  631. ;; Time a thread must be idle (in seconds) before it dies
  632. ; IdleTimeout = 60
  633. ;# {Priority} {Enabled:true} {Priority for script engine threads?} {Lowest BelowNormal Normal AboveNormal Highest} BelowNormal
  634. ;; Thread priority ("Lowest", "BelowNormal", "Normal", "AboveNormal",
  635. ;; "Highest")
  636. ; Priority = "BelowNormal"
  637. ;; Maximum number of events to queue for a script (excluding timers)
  638. ; MaxScriptEventQueue = 300
  639. ;; Stack size per script engine thread in bytes.
  640. ;; If you are experiencing StackOverflowExceptions you may want to increase this (e.g. double it).
  641. ;; The trade-off may be increased memory usage by the script engine.
  642. ; ThreadStackSize = 262144
  643. ;; Set this to true (the default) to load each script into a separate
  644. ;; AppDomain.
  645. ;;
  646. ;; Setting this to false will load all script assemblies into the
  647. ;; current AppDomain, which will significantly improve script loading times.
  648. ;; It will also reduce initial per-script memory overhead.
  649. ;;
  650. ;; However, setting this to false will also prevent script DLLs from being unloaded from memory if the script is deleted.
  651. ;; This may cause an OutOfMemory problem over time when avatars with scripted attachments move in and out of the region.
  652. ;; Some Windows users have also reported script loading problems when AppDomainLoading = false
  653. ; AppDomainLoading = true
  654. ;; Controls whether scripts are stopped by aborting their threads externally (abort) or by co-operative checks from the compiled script (co-op)
  655. ;; co-op will be more stable but this option is currently experimental.
  656. ;; If moving from co-op to abort, existing script DLLs will need to be recompiled.
  657. ;; This currently can only be done manually, either by setting DeleteScriptsOnStartup = true for one run
  658. ;; or by deleting the script DLL* files in bin/ScriptEngines/<region-id>/
  659. ;; One can move from co-op back to abort without recompilation, but reverting back to co-op again will need script recompile
  660. ;; Current valid values are "abort" and "co-op"
  661. ; ScriptStopStrategy = abort
  662. ;# {DeleteScriptsOnStartup} {} {Delete previously compiled script DLLs on startup?} {true false} true
  663. ;; Controls whether previously compiled scripts DLLs are deleted on sim restart. If you set this to false
  664. ;; then startup will be considerably faster since scripts won't need to be recompiled. However, then it becomes your responsibility to delete the
  665. ;; compiled scripts if you're recompiling OpenSim from source code and internal interfaces used
  666. ;; by scripts have changed.
  667. ; DeleteScriptsOnStartup = true
  668. ;# {DefaultCompileLanguage} {Enabled:true} {Default script language?} {lsl vb cs} lsl
  669. ;; Default language for scripts
  670. ; DefaultCompileLanguage = "lsl"
  671. ;# {AllowedCompilers} {Enabled:true} {Languages to allow (comma separated)?} {} lsl
  672. ;; List of allowed languages (lsl,vb,cs)
  673. ;; AllowedCompilers=lsl,cs,js,vb.
  674. ;; *warning*, non lsl languages have access to static methods such as
  675. ;; System.IO.File. Enable at your own risk.
  676. ; AllowedCompilers = "lsl"
  677. ;; Compile debug info (line numbers) into the script assemblies
  678. ; CompileWithDebugInformation = true
  679. ;; Allow the user of mod* functions. This allows a script to pass messages
  680. ;; to a region module via the modSendCommand() function
  681. ;; Default is false
  682. ; AllowMODFunctions = false
  683. ;# {AllowOSFunctions} {Enabled:true} {Allow OSFunctions? (DANGEROUS!)} {true false} false
  684. ;; Allow the use of os* functions (some are dangerous)
  685. ; AllowOSFunctions = false
  686. ;# {AllowLightShareFunctions} {Enabled:false [LightShare]enable_windlight:true} {Allow LightShare functions?} {true false} false
  687. ; Allow the use of LightShare functions.
  688. ; The setting enable_windlight = true must also be enabled in the [LightShare] section.
  689. ; AllowLightShareFunctions = false
  690. ;# {OSFunctionThreatLevel} {Enabled:true AllowOSFunctions:true} {OSFunction threat level? (DANGEROUS!)} {None VeryLow Low Moderate High VeryHigh Severe} VeryLow
  691. ;; Threat level to allow, one of None, VeryLow, Low, Moderate, High, VeryHigh, Severe
  692. ;; See http://opensimulator.org/wiki/Threat_level for more information on these levels.
  693. ;; We do not recommend that use set a general level above Low unless you have a high level of trust
  694. ;; in all the users that can run scripts in your simulator. It is safer to explicitly
  695. ;; allow certain types of user to run higher threat level OSSL functions, as detailed later on.
  696. OSFunctionThreatLevel = VeryLow
  697. ; OS Functions enable/disable
  698. ; For each function, you can add one line, as shown
  699. ; The default for all functions allows them if below threat level
  700. ; true allows the use of the function unconditionally
  701. ; Allow_osSetRegionWaterHeight = true
  702. ; false disables the function completely
  703. ; Allow_osSetRegionWaterHeight = false
  704. ; Comma separated list of UUIDS allows the function for that list of UUIDS
  705. ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb
  706. ; Comma separated list of owner classes that allow the function for a particular class of owners. Choices are
  707. ; - PARCEL_GROUP_MEMBER: allow if the object group is the same group as the parcel
  708. ; - PARCEL_OWNER: allow if the object owner is the parcel owner
  709. ; - ESTATE_MANAGER: allow if the object owner is an estate manager
  710. ; - ESTATE_OWNER: allow if the object owner is the estate owner
  711. ; Allow_osSetRegionWaterHeight = 888760cb-a3cf-43ac-8ea4-8732fd3ee2bb, PARCEL_OWNER, ESTATE_OWNER>, ...
  712. ; You can also use script creators as the uuid
  713. ; Creators_osSetRegionWaterHeight = <uuid>, ...
  714. ; If both Allow_ and Creators_ are given, effective permissions
  715. ; are the union of the two.
  716. ;# {EventLimit} {} {Amount of time a script can spend in an event handler} {} 30
  717. ;; Time a script can spend in an event handler before it is interrupted
  718. ; EventLimit = 30
  719. ;# {KillTimedOutScripts} {} {Kill script in case of event time overruns?} {true false} false
  720. ;; If a script overruns it's event limit, kill the script?
  721. ; KillTimedOutScripts = false
  722. ;# {ScriptDelayFactor} {} {Multiplier for scripting delays} {} 1.0
  723. ;; Sets the multiplier for the scripting delays
  724. ; ScriptDelayFactor = 1.0
  725. ;# {ScriptDistanceLimitFactor} {} {Multiplier for 10.0m distance limits?} {}
  726. ;; The factor the 10 m distances limits are multiplied by
  727. ; ScriptDistanceLimitFactor = 1.0
  728. ;# {NotecardLineReadCharsMax} {} {Maximum length of notecard line?} {} 255
  729. ;; Maximum length of notecard line read
  730. ;; Increasing this to large values potentially opens
  731. ;; up the system to malicious scripters
  732. ; NotecardLineReadCharsMax = 255
  733. ;# {SensorMaxRange} {} {Sensor range} {} 96.0
  734. ;; Sensor settings
  735. ; SensorMaxRange = 96.0
  736. ;# {SensorMaxResults} {} {Max sensor results returned?} {}
  737. ; SensorMaxResults = 16
  738. ;# {DisableUndergroundMovement} {} {Disable underground movement of prims} {true false} true
  739. ;; Disable underground movement of prims (default true); set to
  740. ;; false to allow script controlled underground positioning of
  741. ;; prims
  742. ; DisableUndergroundMovement = true
  743. ;# {ScriptEnginesPath} {} {Path to script assemblies} {} ScriptEngines
  744. ;; Path to script engine assemblies
  745. ;; Default is ./bin/ScriptEngines
  746. ; ScriptEnginesPath = "ScriptEngines"
  747. [MRM]
  748. ;; Enables the Mini Region Modules Script Engine.
  749. ; Enabled = false
  750. ;; Runs MRM in a Security Sandbox
  751. ;; WARNING: DISABLING IS A SECURITY RISK.
  752. ; Sandboxed = true
  753. ;; The level sandbox to use, adjust at your OWN RISK.
  754. ;; Valid values are:
  755. ;; * FullTrust
  756. ;; * SkipVerification
  757. ;; * Execution
  758. ;; * Nothing
  759. ;; * LocalIntranet
  760. ;; * Internet
  761. ;; * Everything
  762. ; SandboxLevel = "Internet"
  763. ;; Only allow Region Owners to run MRMs
  764. ;; May represent a security risk if you disable this.
  765. ; OwnerOnly = true
  766. [FreeSwitchVoice]
  767. ;; In order for this to work you need a functioning FreeSWITCH PBX set up.
  768. ;; Configuration details at http://opensimulator.org/wiki/Freeswitch_Module
  769. ; Enabled = false
  770. ;; You need to load a local service for a standalone, and a remote service
  771. ;; for a grid region. Use one of the lines below, as appropriate
  772. ;; If you're using Freeswitch on a standalone then you will also need to configure the [FreeswitchService] section in config-include/StandaloneCommon.ini
  773. ; LocalServiceModule = OpenSim.Services.FreeswitchService.dll:FreeswitchService
  774. ; LocalServiceModule = OpenSim.Services.Connectors.dll:RemoteFreeswitchConnector
  775. ;; If using a remote connector, specify the server URL
  776. ; FreeswitchServiceURL = http://my.grid.server:8004/fsapi
  777. [Groups]
  778. ;# {Enabled} {} {Enable groups?} {true false} false
  779. ;; Enables the groups module
  780. ; Enabled = false
  781. ;# {LevelGroupCreate} {Enabled:true} {User level for creating groups} {} 0
  782. ;; Minimum user level required to create groups
  783. ; LevelGroupCreate = 0
  784. ;# {Module} {Enabled:true} {Groups module to use? (Use GroupsModule to use Flotsam/Simian)} {Default "Groups Module V2"} Default
  785. ;; The default module can use a PHP XmlRpc server from the Flotsam project at
  786. ;; http://code.google.com/p/flotsam/
  787. ;; or from the SimianGrid project at http://code.google.com/p/openmetaverse
  788. ; Module = Default
  789. ;; or... use Groups Module V2, which works for standalones and robust grids
  790. ; Module = "Groups Module V2"
  791. ;# {StorageProvider} {Module:Groups Module V2} {The DLL that provides the storage for V2} {OpenSim.Data.MySQL.dll}
  792. ; StorageProvider = OpenSim.Data.MySQL.dll
  793. ;# {ServicesConnectorModule} {Module:GroupsModule Module:Groups Module V2} {Service connector to use for groups} {XmlRpcGroupsServicesConnector SimianGroupsServicesConnector "Groups Local Service Connector" "Groups Remote Service Connector" "Groups HG Service Connector"} XmlRpcGroupsServicesConnector
  794. ;; Service connectors to the Groups Service as used in the GroupsModule. Select one as follows:
  795. ;; -- for Flotsam Groups use XmlRpcGroupsServicesConnector
  796. ;; -- for Simian Groups use SimianGroupsServicesConnector
  797. ;; -- for V2 Groups, standalone, non-HG use "Groups Local Service Connector"
  798. ;; -- for V2 Groups, grided sim, non-HG use "Groups Remote Service Connector"
  799. ;; -- for V2 Groups, HG, both standalone and grided sim, use "Groups HG Service Connector"
  800. ;; Note that the quotes "" around the words are important!
  801. ; ServicesConnectorModule = XmlRpcGroupsServicesConnector
  802. ;# {LocalService} {ServicesConnectorModule:Groups HG Service Connector} {Is the group service in this process or elsewhere?} {local remote} local
  803. ;; Used for V2 in HG only. If standalone, set this to local; if grided sim, set this to remote
  804. ; LocalService = local
  805. ;# {GroupsServerURI} {Module:GroupsModule (ServicesConnectorModule:Groups Remote Service Connector or (ServicesConnectorModule:Groups HG Service Connector and LocalService:remote))} {Groups Server URI} {}
  806. ;; URI for the groups services of this grid
  807. ;; e.g. http://yourxmlrpcserver.com/xmlrpc.php for Flotsam XmlRpc
  808. ;; or http://mygridserver.com:82/Grid/ for SimianGrid
  809. ;; or http:://mygridserver.com:8003 for robust, V2
  810. ;; Leave it commented for standalones, V2
  811. ; GroupsServerURI = ""
  812. ;# {HomeURI} {ServicesConnectorModule:Groups HG Service Connector} {What's the home address of this world?} {}
  813. ;; Used for V2 in HG only. For example
  814. ;; http://mygridserver.com:9000 or http://mygridserver.com:8002
  815. ;; If you have this set under [Startup], no need to set it here, leave it commented
  816. ; HomeURI = ""
  817. ;# {MessagingEnabled} {Module:GroupsModule Module:Groups Module V2} {Is groups messaging enabled?} {true false} true
  818. ; MessagingEnabled = true
  819. ;# {MessagingModule} {MessagingEnabled:true} {Module to use for groups messaging} {GroupsMessagingModule "Groups Messaging Module V2"} GroupsMessagingModule
  820. ; MessagingModule = GroupsMessagingModule
  821. ;; or use V2 for Groups V2
  822. ; MessagingModule = "Groups Messaging Module V2"
  823. ;# {NoticesEnabled} {Module:GroupsModule Module:Groups Module V2} {Enable group notices?} {true false} true
  824. ;; Enable Group Notices
  825. ; NoticesEnabled = true
  826. ;# {MessageOnlineUsersOnly} {Module:GroupsModule Module} {Message online users only?} {true false} false
  827. ; Experimental option to only message online users rather than all users
  828. ; Should make large groups with few online members messaging faster, as the expense of more calls to presence service
  829. ; Applies Flotsam Group only. V2 has this always on, no other option
  830. ; MessageOnlineUsersOnly = false
  831. ;; This makes the Groups modules very chatty on the console.
  832. ; DebugEnabled = false
  833. ;; XmlRpc Security settings. These must match those set on your backend
  834. ;; groups service if the service is using these keys
  835. ; XmlRpcServiceReadKey = 1234
  836. ; XmlRpcServiceWriteKey = 1234
  837. [InterestManagement]
  838. ;# {UpdatePrioritizationScheme} {} {Update prioritization scheme?} {BestAvatarResponsiveness Time Distance SimpleAngularDistance FrontBack} BestAvatarResponsiveness
  839. ;; This section controls how state updates are prioritized for each client
  840. ;; Valid values are BestAvatarResponsiveness, Time, Distance,
  841. ;; SimpleAngularDistance, FrontBack
  842. ; UpdatePrioritizationScheme = BestAvatarResponsiveness
  843. [MediaOnAPrim]
  844. ;# {Enabled} {} {Enable Media-on-a-Prim (MOAP)} {true false} true
  845. ;; Enable media on a prim facilities
  846. ; Enabled = true;
  847. [NPC]
  848. ;# {Enabled} {} {Enable Non Player Character (NPC) facilities} {true false} false
  849. ; Enabled = false
  850. [Terrain]
  851. ;# {InitialTerrain} {} {Initial terrain type} {pinhead-island flat} pinhead-island
  852. ; InitialTerrain = "pinhead-island"
  853. [UserProfiles]
  854. ;# {ProfileServiceURL} {} {Set url to UserProfilesService} {}
  855. ;; Set the value of the url to your UserProfilesService
  856. ;; If un-set / "" the module is disabled
  857. ;; ProfileServiceURL = http://127.0.0.1:8002
  858. [XBakes]
  859. ;# {URL} {} {Set URL for Baked texture service} {}
  860. ;; Sets the URL for the baked texture ROBUST service.
  861. ;; Disabled when unset.
  862. ;; URL = http://127.0.0.1:8003
  863. [Architecture]
  864. ;# {Include-Architecture} {} {Choose one of the following architectures} {config-include/Standalone.ini config-include/StandaloneHypergrid.ini config-include/Grid.ini config-include/GridHypergrid.ini config-include/SimianGrid.ini config-include/HyperSimianGrid.ini} config-include/Standalone.ini
  865. ;; Uncomment one of the following includes as required. For instance, to create a standalone OpenSim,
  866. ;; uncomment Include-Architecture = "config-include/Standalone.ini"
  867. ;;
  868. ;; Then you will need to copy and edit the corresponding *Common.example file in config-include/
  869. ;; that the referenced .ini file goes on to include.
  870. ;;
  871. ;; For instance, if you chose "config-include/Standalone.ini" then you will need to copy
  872. ;; "config-include/StandaloneCommon.ini.example" to "config-include/StandaloneCommon.ini" before
  873. ;; editing it to set the database and backend services that OpenSim will use.
  874. ;;
  875. ; Include-Architecture = "config-include/Standalone.ini"
  876. ; Include-Architecture = "config-include/StandaloneHypergrid.ini"
  877. ; Include-Architecture = "config-include/Grid.ini"
  878. ; Include-Architecture = "config-include/GridHypergrid.ini"
  879. ; Include-Architecture = "config-include/SimianGrid.ini"
  880. ; Include-Architecture = "config-include/HyperSimianGrid.ini"