/* * Copyright (c) Contributors, http://opensimulator.org/ * See CONTRIBUTORS.TXT for a full list of copyright holders. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * Neither the name of the OpenSimulator Project nor the * names of its contributors may be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE CONTRIBUTORS BE LIABLE FOR ANY * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ //#define SPAM using System; using System.Collections.Generic; using OpenSim.Framework; using OpenSim.Region.Framework.Scenes; using OpenSim.Region.Framework.Interfaces; using OpenSim.Region.PhysicsModules.SharedBase; using OpenSim.Region.PhysicsModules.ConvexDecompositionDotNet; using OpenMetaverse; using OpenMetaverse.StructuredData; using System.Drawing; using System.Threading; using System.IO.Compression; using PrimMesher; using log4net; using Nini.Config; using System.Reflection; using System.IO; using Mono.Addins; namespace OpenSim.Region.PhysicsModule.ubODEMeshing { [Extension(Path = "/OpenSim/RegionModules", NodeName = "RegionModule", Id = "ubODEMeshmerizer")] public class ubMeshmerizer : IMesher, INonSharedRegionModule { private static readonly ILog m_log = LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); // Setting baseDir to a path will enable the dumping of raw files // raw files can be imported by blender so a visual inspection of the results can be done const float floatPI = (float)Math.PI; private static string cacheControlFilename = "cntr"; private bool m_Enabled = false; public static object diskLock = new object(); public bool doMeshFileCache = true; public bool doCacheExpire = true; public string cachePath = "MeshCache"; public TimeSpan CacheExpire; // const string baseDir = "rawFiles"; private const string baseDir = null; //"rawFiles"; private bool useMeshiesPhysicsMesh = true; private bool doConvexPrims = true; private bool doConvexSculpts = true; private Dictionary m_uniqueMeshes = new Dictionary(); private Dictionary m_uniqueReleasedMeshes = new Dictionary(); #region INonSharedRegionModule public string Name { get { return "ubODEMeshmerizer"; } } public Type ReplaceableInterface { get { return null; } } public void Initialise(IConfigSource config) { IConfig start_config = config.Configs["Startup"]; string mesher = start_config.GetString("meshing", string.Empty); if (mesher == Name) { float fcache = 48.0f; // float fcache = 0.02f; IConfig mesh_config = config.Configs["Mesh"]; if (mesh_config != null) { useMeshiesPhysicsMesh = mesh_config.GetBoolean("UseMeshiesPhysicsMesh", useMeshiesPhysicsMesh); doConvexPrims = mesh_config.GetBoolean("ConvexPrims",doConvexPrims); doConvexSculpts = mesh_config.GetBoolean("ConvexSculpts",doConvexPrims); doMeshFileCache = mesh_config.GetBoolean("MeshFileCache", doMeshFileCache); cachePath = mesh_config.GetString("MeshFileCachePath", cachePath); fcache = mesh_config.GetFloat("MeshFileCacheExpireHours", fcache); doCacheExpire = mesh_config.GetBoolean("MeshFileCacheDoExpire", doCacheExpire); m_Enabled = true; } CacheExpire = TimeSpan.FromHours(fcache); if(String.IsNullOrEmpty(cachePath)) doMeshFileCache = false; if(doMeshFileCache) { if(!checkCache()) { doMeshFileCache = false; doCacheExpire = false; } } else doCacheExpire = false; } } public void Close() { } public void AddRegion(Scene scene) { if (!m_Enabled) return; scene.RegisterModuleInterface(this); } public void RemoveRegion(Scene scene) { if (!m_Enabled) return; scene.UnregisterModuleInterface(this); } public void RegionLoaded(Scene scene) { if (!m_Enabled) return; } #endregion private void ReportPrimError(string message, string primName, PrimMesh primMesh) { m_log.Error(message); m_log.Error("\nPrim Name: " + primName); m_log.Error("****** PrimMesh Parameters ******\n" + primMesh.ParamsToDisplayString()); } /// /// Add a submesh to an existing list of coords and faces. /// /// /// Size of entire object /// /// private void AddSubMesh(OSDMap subMeshData, List coords, List faces) { // Console.WriteLine("subMeshMap for {0} - {1}", primName, Util.GetFormattedXml((OSD)subMeshMap)); // As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format, some Mesh Level // of Detail Blocks (maps) contain just a NoGeometry key to signal there is no // geometry for this submesh. if (subMeshData.ContainsKey("NoGeometry") && ((OSDBoolean)subMeshData["NoGeometry"])) return; OpenMetaverse.Vector3 posMax; OpenMetaverse.Vector3 posMin; if (subMeshData.ContainsKey("PositionDomain")) { posMax = ((OSDMap)subMeshData["PositionDomain"])["Max"].AsVector3(); posMin = ((OSDMap)subMeshData["PositionDomain"])["Min"].AsVector3(); } else { posMax = new Vector3(0.5f, 0.5f, 0.5f); posMin = new Vector3(-0.5f, -0.5f, -0.5f); } ushort faceIndexOffset = (ushort)coords.Count; byte[] posBytes = subMeshData["Position"].AsBinary(); for (int i = 0; i < posBytes.Length; i += 6) { ushort uX = Utils.BytesToUInt16(posBytes, i); ushort uY = Utils.BytesToUInt16(posBytes, i + 2); ushort uZ = Utils.BytesToUInt16(posBytes, i + 4); Coord c = new Coord( Utils.UInt16ToFloat(uX, posMin.X, posMax.X), Utils.UInt16ToFloat(uY, posMin.Y, posMax.Y), Utils.UInt16ToFloat(uZ, posMin.Z, posMax.Z)); coords.Add(c); } byte[] triangleBytes = subMeshData["TriangleList"].AsBinary(); for (int i = 0; i < triangleBytes.Length; i += 6) { ushort v1 = (ushort)(Utils.BytesToUInt16(triangleBytes, i) + faceIndexOffset); ushort v2 = (ushort)(Utils.BytesToUInt16(triangleBytes, i + 2) + faceIndexOffset); ushort v3 = (ushort)(Utils.BytesToUInt16(triangleBytes, i + 4) + faceIndexOffset); Face f = new Face(v1, v2, v3); faces.Add(f); } } /// /// Create a physics mesh from data that comes with the prim. The actual data used depends on the prim type. /// /// /// /// /// /// private Mesh CreateMeshFromPrimMesher(string primName, PrimitiveBaseShape primShape, float lod, bool convex) { // m_log.DebugFormat( // "[MESH]: Creating physics proxy for {0}, shape {1}", // primName, (OpenMetaverse.SculptType)primShape.SculptType); List coords; List faces; bool needsConvexProcessing = convex; if (primShape.SculptEntry) { if (((SculptType)primShape.SculptType) == SculptType.Mesh) { if (!useMeshiesPhysicsMesh) return null; try { if (!GenerateCoordsAndFacesFromPrimMeshData(primName, primShape, out coords, out faces, convex)) return null; needsConvexProcessing = false; } catch { m_log.ErrorFormat("[MESH]: fail to process mesh asset for prim {0}", primName); return null; } } else { try { if (!GenerateCoordsAndFacesFromPrimSculptData(primName, primShape, lod, out coords, out faces)) return null; needsConvexProcessing &= doConvexSculpts; } catch { m_log.ErrorFormat("[MESH]: fail to process sculpt map for prim {0}", primName); return null; } } } else { try { if (!GenerateCoordsAndFacesFromPrimShapeData(primName, primShape, lod, convex, out coords, out faces)) return null; needsConvexProcessing &= doConvexPrims; } catch { m_log.ErrorFormat("[MESH]: fail to process shape parameters for prim {0}", primName); return null; } } int numCoords = coords.Count; int numFaces = faces.Count; if(numCoords < 3 || (!needsConvexProcessing && numFaces < 1)) { m_log.ErrorFormat("[ubODEMesh]: invalid degenerated mesh for prim {0} ignored", primName); return null; } if(needsConvexProcessing) { List convexcoords; List convexfaces; if(CreateBoundingHull(coords, out convexcoords, out convexfaces) && convexcoords != null && convexfaces != null) { coords.Clear(); coords = convexcoords; numCoords = coords.Count; faces.Clear(); faces = convexfaces; numFaces = faces.Count; } else m_log.ErrorFormat("[ubMESH]: failed to create convex for {0} using normal mesh", primName); } Mesh mesh = new Mesh(true); // Add the corresponding triangles to the mesh for (int i = 0; i < numFaces; i++) { Face f = faces[i]; mesh.Add(new Triangle(coords[f.v1].X, coords[f.v1].Y, coords[f.v1].Z, coords[f.v2].X, coords[f.v2].Y, coords[f.v2].Z, coords[f.v3].X, coords[f.v3].Y, coords[f.v3].Z)); } coords.Clear(); faces.Clear(); if(mesh.numberVertices() < 3 || mesh.numberTriangles() < 1) { m_log.ErrorFormat("[ubODEMesh]: invalid degenerated mesh for prim {0} ignored", primName); return null; } primShape.SculptData = Utils.EmptyBytes; return mesh; } /// /// Generate the co-ords and faces necessary to construct a mesh from the mesh data the accompanies a prim. /// /// /// /// /// Coords are added to this list by the method. /// Faces are added to this list by the method. /// true if coords and faces were successfully generated, false if not private bool GenerateCoordsAndFacesFromPrimMeshData( string primName, PrimitiveBaseShape primShape, out List coords, out List faces, bool convex) { // m_log.DebugFormat("[MESH]: experimental mesh proxy generation for {0}", primName); // for ubOde we have a diferent mesh use priority // priority is to use full mesh then decomposition // SL does the oposite bool usemesh = false; coords = new List(); faces = new List(); OSD meshOsd = null; if (primShape.SculptData == null || primShape.SculptData.Length <= 0) { // m_log.InfoFormat("[MESH]: asset data for {0} is zero length", primName); return false; } long start = 0; using (MemoryStream data = new MemoryStream(primShape.SculptData)) { try { OSD osd = OSDParser.DeserializeLLSDBinary(data); if (osd is OSDMap) meshOsd = (OSDMap)osd; else { m_log.WarnFormat("[Mesh}: unable to cast mesh asset to OSDMap prim: {0}",primName); return false; } } catch (Exception e) { m_log.Error("[MESH]: Exception deserializing mesh asset header:" + e.ToString()); return false; } start = data.Position; } if (meshOsd is OSDMap) { OSDMap physicsParms = null; OSDMap map = (OSDMap)meshOsd; if (!convex) { if (map.ContainsKey("physics_shape")) physicsParms = (OSDMap)map["physics_shape"]; // old asset format else if (map.ContainsKey("physics_mesh")) physicsParms = (OSDMap)map["physics_mesh"]; // new asset format if (physicsParms != null) usemesh = true; } if(!usemesh && (map.ContainsKey("physics_convex"))) physicsParms = (OSDMap)map["physics_convex"]; if (physicsParms == null) { //m_log.WarnFormat("[MESH]: unknown mesh type for prim {0}",primName); return false; } int physOffset = physicsParms["offset"].AsInteger() + (int)start; int physSize = physicsParms["size"].AsInteger(); if (physOffset < 0 || physSize == 0) return false; // no mesh data in asset OSD decodedMeshOsd = new OSD(); try { using (MemoryStream outMs = new MemoryStream(4 * physSize)) { using (MemoryStream inMs = new MemoryStream(primShape.SculptData, physOffset, physSize)) { using (DeflateStream decompressionStream = new DeflateStream(inMs, CompressionMode.Decompress)) { byte[] readBuffer = new byte[8192]; inMs.Read(readBuffer, 0, 2); // skip first 2 bytes in header int readLen = 0; while ((readLen = decompressionStream.Read(readBuffer, 0, readBuffer.Length)) > 0) outMs.Write(readBuffer, 0, readLen); } } outMs.Seek(0, SeekOrigin.Begin); decodedMeshOsd = OSDParser.DeserializeLLSDBinary(outMs); } } catch (Exception e) { m_log.Error("[MESH]: exception decoding physical mesh prim " + primName +" : " + e.ToString()); return false; } if (usemesh) { OSDArray decodedMeshOsdArray = null; // physics_shape is an array of OSDMaps, one for each submesh if (decodedMeshOsd is OSDArray) { // Console.WriteLine("decodedMeshOsd for {0} - {1}", primName, Util.GetFormattedXml(decodedMeshOsd)); decodedMeshOsdArray = (OSDArray)decodedMeshOsd; foreach (OSD subMeshOsd in decodedMeshOsdArray) { if (subMeshOsd is OSDMap) AddSubMesh(subMeshOsd as OSDMap, coords, faces); } } } else { OSDMap cmap = (OSDMap)decodedMeshOsd; if (cmap == null) return false; byte[] data; List vs = new List(); PHullResult hullr = new PHullResult(); float3 f3; Coord c; Face f; Vector3 range; Vector3 min; const float invMaxU16 = 1.0f / 65535f; int t1; int t2; int t3; int i; int nverts; int nindexs; if (cmap.ContainsKey("Max")) range = cmap["Max"].AsVector3(); else range = new Vector3(0.5f, 0.5f, 0.5f); if (cmap.ContainsKey("Min")) min = cmap["Min"].AsVector3(); else min = new Vector3(-0.5f, -0.5f, -0.5f); range = range - min; range *= invMaxU16; if(!convex) { // if mesh data not present and not convex then we need convex decomposition data if (cmap.ContainsKey("HullList") && cmap.ContainsKey("Positions")) { List hsizes = new List(); int totalpoints = 0; data = cmap["HullList"].AsBinary(); for (i = 0; i < data.Length; i++) { t1 = data[i]; if (t1 == 0) t1 = 256; totalpoints += t1; hsizes.Add(t1); } data = cmap["Positions"].AsBinary(); int ptr = 0; int vertsoffset = 0; if (totalpoints == data.Length / 6) // 2 bytes per coord, 3 coords per point { foreach (int hullsize in hsizes) { for (i = 0; i < hullsize; i++ ) { t1 = data[ptr++]; t1 += data[ptr++] << 8; t2 = data[ptr++]; t2 += data[ptr++] << 8; t3 = data[ptr++]; t3 += data[ptr++] << 8; f3 = new float3((t1 * range.X + min.X), (t2 * range.Y + min.Y), (t3 * range.Z + min.Z)); vs.Add(f3); } if(hullsize <3) { vs.Clear(); continue; } if (hullsize <5) { foreach (float3 point in vs) { c.X = point.x; c.Y = point.y; c.Z = point.z; coords.Add(c); } f = new Face(vertsoffset, vertsoffset + 1, vertsoffset + 2); faces.Add(f); if (hullsize == 4) { // not sure about orientation.. f = new Face(vertsoffset, vertsoffset + 2, vertsoffset + 3); faces.Add(f); f = new Face(vertsoffset, vertsoffset + 3, vertsoffset + 1); faces.Add(f); f = new Face(vertsoffset + 3, vertsoffset + 2, vertsoffset + 1); faces.Add(f); } vertsoffset += vs.Count; vs.Clear(); continue; } List indices; if (!HullUtils.ComputeHull(vs, out indices)) { vs.Clear(); continue; } nverts = vs.Count; nindexs = indices.Count; if (nindexs % 3 != 0) { vs.Clear(); continue; } for (i = 0; i < nverts; i++) { c.X = vs[i].x; c.Y = vs[i].y; c.Z = vs[i].z; coords.Add(c); } for (i = 0; i < nindexs; i += 3) { t1 = indices[i]; if (t1 > nverts) break; t2 = indices[i + 1]; if (t2 > nverts) break; t3 = indices[i + 2]; if (t3 > nverts) break; f = new Face(vertsoffset + t1, vertsoffset + t2, vertsoffset + t3); faces.Add(f); } vertsoffset += nverts; vs.Clear(); } } if (coords.Count > 0 && faces.Count > 0) return true; } else { // if neither mesh or decomposition present, warn and use convex //m_log.WarnFormat("[MESH]: Data for PRIM shape type ( mesh or decomposition) not found for prim {0}",primName); } } vs.Clear(); if (cmap.ContainsKey("BoundingVerts")) { data = cmap["BoundingVerts"].AsBinary(); for (i = 0; i < data.Length; ) { t1 = data[i++]; t1 += data[i++] << 8; t2 = data[i++]; t2 += data[i++] << 8; t3 = data[i++]; t3 += data[i++] << 8; f3 = new float3((t1 * range.X + min.X), (t2 * range.Y + min.Y), (t3 * range.Z + min.Z)); vs.Add(f3); } nverts = vs.Count; if (nverts < 3) { vs.Clear(); return false; } if (nverts < 5) { foreach (float3 point in vs) { c.X = point.x; c.Y = point.y; c.Z = point.z; coords.Add(c); } f = new Face(0, 1, 2); faces.Add(f); if (nverts == 4) { f = new Face(0, 2, 3); faces.Add(f); f = new Face(0, 3, 1); faces.Add(f); f = new Face( 3, 2, 1); faces.Add(f); } vs.Clear(); return true; } List indices; if (!HullUtils.ComputeHull(vs, out indices)) return false; nindexs = indices.Count; if (nindexs % 3 != 0) return false; for (i = 0; i < nverts; i++) { c.X = vs[i].x; c.Y = vs[i].y; c.Z = vs[i].z; coords.Add(c); } for (i = 0; i < nindexs; i += 3) { t1 = indices[i]; if (t1 > nverts) break; t2 = indices[i + 1]; if (t2 > nverts) break; t3 = indices[i + 2]; if (t3 > nverts) break; f = new Face(t1, t2, t3); faces.Add(f); } vs.Clear(); if (coords.Count > 0 && faces.Count > 0) return true; } else return false; } } return true; } /// /// Generate the co-ords and faces necessary to construct a mesh from the sculpt data the accompanies a prim. /// /// /// /// /// /// Coords are added to this list by the method. /// Faces are added to this list by the method. /// true if coords and faces were successfully generated, false if not private bool GenerateCoordsAndFacesFromPrimSculptData( string primName, PrimitiveBaseShape primShape, float lod, out List coords, out List faces) { coords = new List(); faces = new List(); PrimMesher.SculptMesh sculptMesh; Image idata = null; if (primShape.SculptData == null || primShape.SculptData.Length == 0) return false; try { OpenMetaverse.Imaging.ManagedImage unusedData; OpenMetaverse.Imaging.OpenJPEG.DecodeToImage(primShape.SculptData, out unusedData, out idata); unusedData = null; if (idata == null) { // In some cases it seems that the decode can return a null bitmap without throwing // an exception m_log.WarnFormat("[PHYSICS]: OpenJPEG decoded sculpt data for {0} to a null bitmap. Ignoring.", primName); return false; } } catch (DllNotFoundException) { m_log.Error("[PHYSICS]: OpenJpeg is not installed correctly on this system. Physics Proxy generation failed. Often times this is because of an old version of GLIBC. You must have version 2.4 or above!"); return false; } catch (IndexOutOfRangeException) { m_log.Error("[PHYSICS]: OpenJpeg was unable to decode this. Physics Proxy generation failed"); return false; } catch (Exception ex) { m_log.Error("[PHYSICS]: Unable to generate a Sculpty physics proxy. Sculpty texture decode failed: " + ex.Message); return false; } PrimMesher.SculptMesh.SculptType sculptType; // remove mirror and invert bits OpenMetaverse.SculptType pbsSculptType = ((OpenMetaverse.SculptType)(primShape.SculptType & 0x3f)); switch (pbsSculptType) { case OpenMetaverse.SculptType.Cylinder: sculptType = PrimMesher.SculptMesh.SculptType.cylinder; break; case OpenMetaverse.SculptType.Plane: sculptType = PrimMesher.SculptMesh.SculptType.plane; break; case OpenMetaverse.SculptType.Torus: sculptType = PrimMesher.SculptMesh.SculptType.torus; break; case OpenMetaverse.SculptType.Sphere: sculptType = PrimMesher.SculptMesh.SculptType.sphere; break; default: sculptType = PrimMesher.SculptMesh.SculptType.plane; break; } bool mirror = ((primShape.SculptType & 128) != 0); bool invert = ((primShape.SculptType & 64) != 0); sculptMesh = new PrimMesher.SculptMesh((Bitmap)idata, sculptType, (int)lod, mirror, invert); idata.Dispose(); // sculptMesh.DumpRaw(baseDir, primName, "primMesh"); coords = sculptMesh.coords; faces = sculptMesh.faces; return true; } /// /// Generate the co-ords and faces necessary to construct a mesh from the shape data the accompanies a prim. /// /// /// /// /// Coords are added to this list by the method. /// Faces are added to this list by the method. /// true if coords and faces were successfully generated, false if not private bool GenerateCoordsAndFacesFromPrimShapeData( string primName, PrimitiveBaseShape primShape, float lod, bool convex, out List coords, out List faces) { PrimMesh primMesh; coords = new List(); faces = new List(); float pathShearX = primShape.PathShearX < 128 ? (float)primShape.PathShearX * 0.01f : (float)(primShape.PathShearX - 256) * 0.01f; float pathShearY = primShape.PathShearY < 128 ? (float)primShape.PathShearY * 0.01f : (float)(primShape.PathShearY - 256) * 0.01f; float pathBegin = (float)primShape.PathBegin * 2.0e-5f; float pathEnd = 1.0f - (float)primShape.PathEnd * 2.0e-5f; float pathScaleX = (float)(primShape.PathScaleX - 100) * 0.01f; float pathScaleY = (float)(primShape.PathScaleY - 100) * 0.01f; float profileBegin = (float)primShape.ProfileBegin * 2.0e-5f; float profileEnd = 1.0f - (float)primShape.ProfileEnd * 2.0e-5f; if (profileBegin < 0.0f) profileBegin = 0.0f; if (profileEnd < 0.02f) profileEnd = 0.02f; else if (profileEnd > 1.0f) profileEnd = 1.0f; if (profileBegin >= profileEnd) profileBegin = profileEnd - 0.02f; float profileHollow = (float)primShape.ProfileHollow * 2.0e-5f; if(convex) profileHollow = 0.0f; else if (profileHollow > 0.95f) profileHollow = 0.95f; int sides = 4; LevelOfDetail iLOD = (LevelOfDetail)lod; byte profshape = (byte)(primShape.ProfileCurve & 0x07); if (profshape == (byte)ProfileShape.EquilateralTriangle || profshape == (byte)ProfileShape.IsometricTriangle || profshape == (byte)ProfileShape.RightTriangle) sides = 3; else if (profshape == (byte)ProfileShape.Circle) { switch (iLOD) { case LevelOfDetail.High: sides = 24; break; case LevelOfDetail.Medium: sides = 12; break; case LevelOfDetail.Low: sides = 6; break; case LevelOfDetail.VeryLow: sides = 3; break; default: sides = 24; break; } } else if (profshape == (byte)ProfileShape.HalfCircle) { // half circle, prim is a sphere switch (iLOD) { case LevelOfDetail.High: sides = 24; break; case LevelOfDetail.Medium: sides = 12; break; case LevelOfDetail.Low: sides = 6; break; case LevelOfDetail.VeryLow: sides = 3; break; default: sides = 24; break; } profileBegin = 0.5f * profileBegin + 0.5f; profileEnd = 0.5f * profileEnd + 0.5f; } int hollowSides = sides; if (primShape.HollowShape == HollowShape.Circle) { switch (iLOD) { case LevelOfDetail.High: hollowSides = 24; break; case LevelOfDetail.Medium: hollowSides = 12; break; case LevelOfDetail.Low: hollowSides = 6; break; case LevelOfDetail.VeryLow: hollowSides = 3; break; default: hollowSides = 24; break; } } else if (primShape.HollowShape == HollowShape.Square) hollowSides = 4; else if (primShape.HollowShape == HollowShape.Triangle) { if (profshape == (byte)ProfileShape.HalfCircle) hollowSides = 6; else hollowSides = 3; } primMesh = new PrimMesh(sides, profileBegin, profileEnd, profileHollow, hollowSides); if (primMesh.errorMessage != null) if (primMesh.errorMessage.Length > 0) m_log.Error("[ERROR] " + primMesh.errorMessage); primMesh.topShearX = pathShearX; primMesh.topShearY = pathShearY; primMesh.pathCutBegin = pathBegin; primMesh.pathCutEnd = pathEnd; if (primShape.PathCurve == (byte)Extrusion.Straight || primShape.PathCurve == (byte) Extrusion.Flexible) { primMesh.twistBegin = (float)(primShape.PathTwistBegin * (floatPI * 0.01f)); primMesh.twistEnd = (float)(primShape.PathTwist * (floatPI * 0.01f)); primMesh.taperX = pathScaleX; primMesh.taperY = pathScaleY; #if SPAM m_log.Debug("****** PrimMesh Parameters (Linear) ******\n" + primMesh.ParamsToDisplayString()); #endif try { primMesh.Extrude(PathType.Linear); ; } catch (Exception ex) { ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh); return false; } } else { primMesh.holeSizeX = (200 - primShape.PathScaleX) * 0.01f; primMesh.holeSizeY = (200 - primShape.PathScaleY) * 0.01f; primMesh.radius = 0.01f * primShape.PathRadiusOffset; primMesh.revolutions = 1.0f + 0.015f * primShape.PathRevolutions; primMesh.skew = 0.01f * primShape.PathSkew; primMesh.twistBegin = (float)(primShape.PathTwistBegin * (floatPI * 0.02f)); primMesh.twistEnd = (float)(primShape.PathTwistBegin * (floatPI * 0.02f)); primMesh.taperX = primShape.PathTaperX * 0.01f; primMesh.taperY = primShape.PathTaperY * 0.01f; if(profshape == (byte)ProfileShape.HalfCircle) { if(primMesh.holeSizeY < 0.01f) primMesh.holeSizeY = 0.01f; else if(primMesh.holeSizeY > 1.0f) primMesh.holeSizeY = 1.0f; } #if SPAM m_log.Debug("****** PrimMesh Parameters (Circular) ******\n" + primMesh.ParamsToDisplayString()); #endif try { primMesh.Extrude(PathType.Circular); } catch (Exception ex) { ReportPrimError("Extrusion failure: exception: " + ex.ToString(), primName, primMesh); return false; } } // primMesh.DumpRaw(baseDir, primName, "primMesh"); coords = primMesh.coords; faces = primMesh.faces; return true; } public AMeshKey GetMeshUniqueKey(PrimitiveBaseShape primShape, Vector3 size, byte lod, bool convex) { AMeshKey key = new AMeshKey(); Byte[] someBytes; key.hashB = 5181; key.hashC = 5181; ulong hash = 5381; if (primShape.SculptEntry) { key.uuid = primShape.SculptTexture; key.hashC = mdjb2(key.hashC, primShape.SculptType); key.hashC = mdjb2(key.hashC, primShape.PCode); } else { hash = mdjb2(hash, primShape.PathCurve); hash = mdjb2(hash, (byte)primShape.HollowShape); hash = mdjb2(hash, (byte)primShape.ProfileShape); hash = mdjb2(hash, primShape.PathBegin); hash = mdjb2(hash, primShape.PathEnd); hash = mdjb2(hash, primShape.PathScaleX); hash = mdjb2(hash, primShape.PathScaleY); hash = mdjb2(hash, primShape.PathShearX); key.hashA = hash; hash = key.hashB; hash = mdjb2(hash, primShape.PathShearY); hash = mdjb2(hash, (byte)primShape.PathTwist); hash = mdjb2(hash, (byte)primShape.PathTwistBegin); hash = mdjb2(hash, (byte)primShape.PathRadiusOffset); hash = mdjb2(hash, (byte)primShape.PathTaperX); hash = mdjb2(hash, (byte)primShape.PathTaperY); hash = mdjb2(hash, primShape.PathRevolutions); hash = mdjb2(hash, (byte)primShape.PathSkew); hash = mdjb2(hash, primShape.ProfileBegin); hash = mdjb2(hash, primShape.ProfileEnd); hash = mdjb2(hash, primShape.ProfileHollow); hash = mdjb2(hash, primShape.PCode); key.hashB = hash; } hash = key.hashC; hash = mdjb2(hash, lod); if (size == m_MeshUnitSize) { hash = hash << 8; hash |= 8; } else { someBytes = size.GetBytes(); for (int i = 0; i < someBytes.Length; i++) hash = mdjb2(hash, someBytes[i]); hash = hash << 8; } if (convex) hash |= 4; if (primShape.SculptEntry) { hash |= 1; if (primShape.SculptType == (byte)SculptType.Mesh) hash |= 2; } key.hashC = hash; return key; } private ulong mdjb2(ulong hash, byte c) { return ((hash << 5) + hash) + (ulong)c; } private ulong mdjb2(ulong hash, ushort c) { hash = ((hash << 5) + hash) + (ulong)((byte)c); return ((hash << 5) + hash) + (ulong)(c >> 8); } public IMesh CreateMesh(String primName, PrimitiveBaseShape primShape, Vector3 size, float lod) { return CreateMesh(primName, primShape, size, lod, false,false,false); } public IMesh CreateMesh(String primName, PrimitiveBaseShape primShape, Vector3 size, float lod, bool isPhysical) { return CreateMesh(primName, primShape, size, lod, false,false,false); } public IMesh CreateMesh(String primName, PrimitiveBaseShape primShape, Vector3 size, float lod, bool isPhysical, bool shouldCache, bool convex, bool forOde) { return CreateMesh(primName, primShape, size, lod, false, false, false); } public IMesh GetMesh(String primName, PrimitiveBaseShape primShape, Vector3 size, float lod, bool isPhysical, bool convex) { Mesh mesh = null; if (size.X < 0.01f) size.X = 0.01f; if (size.Y < 0.01f) size.Y = 0.01f; if (size.Z < 0.01f) size.Z = 0.01f; AMeshKey key = GetMeshUniqueKey(primShape, size, (byte)lod, convex); lock (m_uniqueMeshes) { m_uniqueMeshes.TryGetValue(key, out mesh); if (mesh != null) { mesh.RefCount++; return mesh; } // try to find a identical mesh on meshs recently released lock (m_uniqueReleasedMeshes) { m_uniqueReleasedMeshes.TryGetValue(key, out mesh); if (mesh != null) { m_uniqueReleasedMeshes.Remove(key); try { m_uniqueMeshes.Add(key, mesh); } catch { } mesh.RefCount = 1; return mesh; } } } return null; } private static Vector3 m_MeshUnitSize = new Vector3(1.0f, 1.0f, 1.0f); public IMesh CreateMesh(String primName, PrimitiveBaseShape primShape, Vector3 size, float lod, bool isPhysical, bool convex, bool forOde) { #if SPAM m_log.DebugFormat("[MESH]: Creating mesh for {0}", primName); #endif Mesh mesh = null; if (size.X < 0.01f) size.X = 0.01f; if (size.Y < 0.01f) size.Y = 0.01f; if (size.Z < 0.01f) size.Z = 0.01f; // try to find a identical mesh on meshs in use AMeshKey key = GetMeshUniqueKey(primShape,size,(byte)lod, convex); lock (m_uniqueMeshes) { m_uniqueMeshes.TryGetValue(key, out mesh); if (mesh != null) { mesh.RefCount++; return mesh; } // try to find a identical mesh on meshs recently released lock (m_uniqueReleasedMeshes) { m_uniqueReleasedMeshes.TryGetValue(key, out mesh); if (mesh != null) { m_uniqueReleasedMeshes.Remove(key); try { m_uniqueMeshes.Add(key, mesh); } catch { } mesh.RefCount = 1; return mesh; } } } Mesh UnitMesh = null; AMeshKey unitKey = GetMeshUniqueKey(primShape, m_MeshUnitSize, (byte)lod, convex); lock (m_uniqueReleasedMeshes) { m_uniqueReleasedMeshes.TryGetValue(unitKey, out UnitMesh); if (UnitMesh != null) { UnitMesh.RefCount = 1; } } if (UnitMesh == null && primShape.SculptEntry && doMeshFileCache) UnitMesh = GetFromFileCache(unitKey); if (UnitMesh == null) { UnitMesh = CreateMeshFromPrimMesher(primName, primShape, lod, convex); if (UnitMesh == null) return null; UnitMesh.DumpRaw(baseDir, unitKey.ToString(), "Z"); if (forOde) { // force pinned mem allocation UnitMesh.PrepForOde(); } else UnitMesh.TrimExcess(); UnitMesh.Key = unitKey; UnitMesh.RefCount = 1; if (doMeshFileCache && primShape.SculptEntry) StoreToFileCache(unitKey, UnitMesh); lock (m_uniqueReleasedMeshes) { try { m_uniqueReleasedMeshes.Add(unitKey, UnitMesh); } catch { } } } mesh = UnitMesh.Scale(size); mesh.Key = key; mesh.RefCount = 1; lock (m_uniqueMeshes) { try { m_uniqueMeshes.Add(key, mesh); } catch { } } return mesh; } public void ReleaseMesh(IMesh imesh) { if (imesh == null) return; Mesh mesh = (Mesh)imesh; lock (m_uniqueMeshes) { int curRefCount = mesh.RefCount; curRefCount--; if (curRefCount > 0) { mesh.RefCount = curRefCount; return; } mesh.RefCount = 0; m_uniqueMeshes.Remove(mesh.Key); lock (m_uniqueReleasedMeshes) { try { m_uniqueReleasedMeshes.Add(mesh.Key, mesh); } catch { } } } } public void ExpireReleaseMeshs() { if (m_uniqueReleasedMeshes.Count == 0) return; List meshstodelete = new List(); int refcntr; lock (m_uniqueReleasedMeshes) { foreach (Mesh m in m_uniqueReleasedMeshes.Values) { refcntr = m.RefCount; refcntr--; if (refcntr > -6) m.RefCount = refcntr; else meshstodelete.Add(m); } foreach (Mesh m in meshstodelete) { m_uniqueReleasedMeshes.Remove(m.Key); m.releaseBuildingMeshData(); m.releasePinned(); } } } public void FileNames(AMeshKey key, out string dir, out string fullFileName) { string id = key.ToString(); string init = id.Substring(0, 1); dir = System.IO.Path.Combine(cachePath, init); fullFileName = System.IO.Path.Combine(dir, id); } public string FullFileName(AMeshKey key) { string id = key.ToString(); string init = id.Substring(0,1); id = System.IO.Path.Combine(init, id); id = System.IO.Path.Combine(cachePath, id); return id; } private Mesh GetFromFileCache(AMeshKey key) { Mesh mesh = null; string filename = FullFileName(key); bool ok = true; lock (diskLock) { if (File.Exists(filename)) { try { using(FileStream stream = File.Open(filename, FileMode.Open, FileAccess.Read, FileShare.Read)) { // BinaryFormatter bformatter = new BinaryFormatter(); mesh = Mesh.FromStream(stream,key); } } catch (Exception e) { ok = false; m_log.ErrorFormat( "[MESH CACHE]: Failed to get file {0}. Exception {1} {2}", filename, e.Message, e.StackTrace); } try { if (mesh == null || !ok) File.Delete(filename); else File.SetLastAccessTimeUtc(filename, DateTime.UtcNow); } catch { } } } return mesh; } private void StoreToFileCache(AMeshKey key, Mesh mesh) { bool ok = false; // Make sure the target cache directory exists string dir = String.Empty; string filename = String.Empty; FileNames(key, out dir, out filename); lock (diskLock) { Stream stream = null; try { if (!Directory.Exists(dir)) { Directory.CreateDirectory(dir); } stream = File.Open(filename, FileMode.Create); ok = mesh.ToStream(stream); } catch (IOException e) { m_log.ErrorFormat( "[MESH CACHE]: Failed to write file {0}. Exception {1} {2}.", filename, e.Message, e.StackTrace); ok = false; } finally { if(stream != null) stream.Dispose(); } if (!ok && File.Exists(filename)) { try { File.Delete(filename); } catch (IOException) { m_log.ErrorFormat( "[MESH CACHE]: Failed to delete file {0}",filename); } } } } private static DateTime lastExpireTime = DateTime.MinValue; public void ExpireFileCache() { if (!doCacheExpire) return; lock (diskLock) { try { DateTime now = DateTime.UtcNow; if(now.Subtract(lastExpireTime).TotalMinutes < 10.0) return; lastExpireTime = now; string controlfile = System.IO.Path.Combine(cachePath, cacheControlFilename); if (File.Exists(controlfile)) { int ndeleted = 0; int totalfiles = 0; int ndirs = 0; DateTime OlderTime = File.GetLastAccessTimeUtc(controlfile) - CacheExpire; File.SetLastAccessTimeUtc(controlfile, now); foreach (string dir in Directory.GetDirectories(cachePath)) { try { foreach (string file in Directory.GetFiles(dir)) { try { if (File.GetLastAccessTimeUtc(file) < OlderTime) { File.Delete(file); ndeleted++; } } catch { } totalfiles++; } } catch { } ndirs++; } if (ndeleted == 0) m_log.InfoFormat("[MESH CACHE]: {0} Files in {1} cache folders, no expires", totalfiles,ndirs); else m_log.InfoFormat("[MESH CACHE]: {0} Files in {1} cache folders, expired {2} files accessed before {3}", totalfiles,ndirs, ndeleted, OlderTime.ToString()); } else { m_log.Info("[MESH CACHE]: Expire delayed to next startup"); FileStream fs = File.Create(controlfile,4096,FileOptions.WriteThrough); fs.Close(); } } catch { } } } public bool checkCache() { string controlfile = System.IO.Path.Combine(cachePath, cacheControlFilename); lock (diskLock) { try { if (!Directory.Exists(cachePath)) { Directory.CreateDirectory(cachePath); Thread.Sleep(100); FileStream fs = File.Create(controlfile, 4096, FileOptions.WriteThrough); fs.Close(); return true; } } catch { doMeshFileCache = false; doCacheExpire = false; return false; } finally {} if (File.Exists(controlfile)) return true; try { Directory.Delete(cachePath, true); while(Directory.Exists(cachePath)) Thread.Sleep(100); } catch(Exception e) { m_log.Error("[MESH CACHE]: failed to delete old version of the cache: " + e.Message); doMeshFileCache = false; doCacheExpire = false; return false; } finally {} try { Directory.CreateDirectory(cachePath); while(!Directory.Exists(cachePath)) Thread.Sleep(100); } catch(Exception e) { m_log.Error("[MESH CACHE]: failed to create new cache folder: " + e.Message); doMeshFileCache = false; doCacheExpire = false; return false; } finally {} try { FileStream fs = File.Create(controlfile, 4096, FileOptions.WriteThrough); fs.Close(); } catch(Exception e) { m_log.Error("[MESH CACHE]: failed to create new control file: " + e.Message); doMeshFileCache = false; doCacheExpire = false; return false; } finally {} return true; } } public bool CreateBoundingHull(List inputVertices, out List convexcoords, out List newfaces) { convexcoords = null; newfaces = null; HullDesc desc = new HullDesc(); HullResult result = new HullResult(); int nInputVerts = inputVertices.Count; int i; List vs = new List(nInputVerts); float3 f3; //useless copy for(i = 0 ; i < nInputVerts; i++) { f3 = new float3(inputVertices[i].X, inputVertices[i].Y, inputVertices[i].Z); vs.Add(f3); } desc.Vertices = vs; desc.Flags = HullFlag.QF_TRIANGLES; desc.MaxVertices = 256; try { HullError ret = HullUtils.CreateConvexHull(desc, ref result); if (ret != HullError.QE_OK) return false; int nverts = result.OutputVertices.Count; int nindx = result.Indices.Count; if(nverts < 3 || nindx< 3) return false; if(nindx % 3 != 0) return false; convexcoords = new List(nverts); Coord c; vs = result.OutputVertices; for(i = 0 ; i < nverts; i++) { c = new Coord(vs[i].x, vs[i].y, vs[i].z); convexcoords.Add(c); } newfaces = new List(nindx / 3); List indxs = result.Indices; int k, l, m; Face f; for(i = 0 ; i < nindx;) { k = indxs[i++]; l = indxs[i++]; m = indxs[i++]; if(k > nInputVerts) continue; if(l > nInputVerts) continue; if(m > nInputVerts) continue; f = new Face(k,l,m); newfaces.Add(f); } } catch { return false; } return true; } } }